Quote:
Originally Posted by gfrg88
pfffffft. what you all think . LOL of course im going to keep it high comp plus boost. go big or go home LOLQuote:
Originally Posted by Tdurr
Printable View
Quote:
Originally Posted by gfrg88
pfffffft. what you all think . LOL of course im going to keep it high comp plus boost. go big or go home LOLQuote:
Originally Posted by Tdurr
p72 ecu?
it don't matter what ecu he's using since he'll be running crome... probably like a p06 ecu, since they're the cheapest to chip..
In this 93 civic i just got it has a b18b1 with s4c tranny thats marked r4 ..still not for sure if its lsd .but it might be.. It has a p75 ecu i think ? I donno but i dont like the car at all really. it needs some motor work..seems to be a bad head gasket ..do i have a good start on a b series swap for my cookie ?
I would say maybe.. depends on price... all you're gonna use from that is the engine, tranny, ecu.....
I have a p06 which I can put any base map an tune from there. You have a pr4 ecu which is a stock ls ecu.
:nod:
I just rebuildt the 89 driver lude axle. All I need is the pass which is a 89 teg pass. I'll be getting that soon. So other the. That. I have a 7.5 fidanza flywheel an stage one exedy clutch. So pretty much all I need is plugs an wires an dizzy. Eeeeeeeee almost lol
Omgg im pumped lol
Hell ya bro. L be posting pics very shorty lol. Maybe a vid me building lol
Hey when ur done will you do a = How to thread ?
I'll try lol.
Update bottom end is complete. I'll be installing the golden eagle head studs an lsv golden eagle kit this week
Veddy nice!
waiting on pics................... come on homie!!!!!!! apurate guey!!
I have seen pics:rofl:
^^^^^ via Facebook lol. I'll post pics
I dont facebook! I hate it!
Ha, just saw them there lol.. looking good man!!
looks good huh. I have to post on hurr just lazy lolQuote:
Originally Posted by gfrg88
We need pics HERE!!!
x2 lol right meow!!!!Quote:
Originally Posted by obdriver6
haha but seriously pics or it didnt happen
Ok well my bad on not uploading pics. Just been busy with school an building the motor an so on . Here a few pics. I installed b16a water an oil pump an golden eagle dowel pins an head studs also golden eagle. An the adapter in the back. Oil from rotating engine lol
http://i728.photobucket.com/albums/w...i/645030b4.jpg
http://i728.photobucket.com/albums/w...i/54cebb02.jpg
http://i728.photobucket.com/albums/w...i/bcb7f675.jpg
Mmm high compression :eatarrow:
Damn straight lol.
Geez, is this not done yet lol!
No taking my time. Winter is here lol
K will little update. I had some issues with my y1 gear box so lucky i tore it apart and inspected it . install all new bearings,seals. inspected gears. reverse was a bit rough but o will. Speedo gear drive was jacked up. got a free S1 trans that said that was bad but all that happen is the Diff pin snapped in half but did not cause any damage LOl so i have another trans for free. So ill be stuffing my motor in my car soon. OOOO what a feeling LMFAO
YAY!! :thumbup:
Lol.
Here is my y1 I did a little overhaul. Some random pics an a vid.
http://i728.photobucket.com/albums/w...i/ad17306e.mp4
http://i728.photobucket.com/albums/w...i/92926e46.jpg
http://i728.photobucket.com/albums/w...i/73a5a581.jpg
http://i728.photobucket.com/albums/w...i/f377fdc1.jpg
Justed wanted To say Honda trans are cake to rebuild.
bump looking good man im ready to get a b series in my hatch
I'm bout to drop my swap in. Snow kills it thou lol
You doing it today ?
good then come on over, I have 2 to tear apart and go through again. the b20a trans looks the same inside but somethings still up. The gsr trans is an s80 hydro and I need to put an lsd into it. Ill put you up if you want or whatever, let me know. Well see whos b powered machine is better afterall. Yours is I thinkQuote:
Originally Posted by Rendon LX-i
Yeah man we can do that. What you trying to do out the LSD in the s80 or b20 trans?
No in a couple of weeksQuote:
Originally Posted by -$MOKIN-
pulling the LSD from the b20à into the s80. ill use it more with the hatch then I would with the coupe.
We need a list if all the things needed for a swap like this. I wanna swap my 87lxi. I can't stand the pokey A series. I wanna go b series. The build looks good though. Good job dude.
its not a easy swap most of the stuff will have to be custom. just do your research and be ready to spend money for unexpected stuffQuote:
Originally Posted by kretty
Yup cant be tight on a swap like this. its fun and when you open the hood people be like HUH. im like ya SON lol
V-TEC BETCH!:gun:
I can't wait to do this as well :D i should be buying the mounts next month with pics to prove im not lying :).
DUde timelapse a video of you putting it in....Quote:
Originally Posted by Rendon LX-i
CANT WAIT ..
Will do.
Sick. You ever get your emulator working on crome?
sure did. Fucking drivers i swear LOL. vista = epic fail. got windows 7 much more faster lol
I can't wait to see it finished!
I thought it would have been done by now.
Progress is good though.
HELLO ??? Where is the vid ?
x2 and the whole shit ton of picturesQuote:
Originally Posted by -$MOKIN-
easy easy lol. School is killer. ill be done puttin the motor together here in break. ......thinking of doing Coil on plug to while im at it ;0
If you were a better mechanic you'd be done with school and postin up vids. HA,HAH!
whew, get it done bro. ;)
well bad news.
I mean good news. Haha motor is done an will be putting the tranny on an then stuffing her in as soon as I can .
http://i728.photobucket.com/albums/w...i/0fd7fd69.jpg
http://i728.photobucket.com/albums/w...i/2c861b93.jpg
http://i728.photobucket.com/albums/w...i/a3469650.jpg
http://i728.photobucket.com/albums/w...i/488146ef.jpg
K bye.
Nice lsvtec
Come on, start stuffing!
i hope the headers clear the front crossmember. because my stock gsr ones i had to notch it.
Made my own cross memeber
sick shit josh!
Thanks gio. Looking for 200 all motor. I should do that easily
Was going to say the same thing.Quote:
Originally Posted by MessyHonda
and great solution lol. Looking good man, should be driving shortly!Quote:
Originally Posted by Rendon LX-i
w00t! Engine looks good man! Can't wait to see it on the road, better get a dyno man!
For sure John. Have to get other meet together.
Legend. Yea I figured that the cross member going to be tight . So I hacked a lot off an boxed it using some pretty beef steel.
Mine is notched back to where it splits then the guy hammered the down tubes basically in half so they would clear.
Awwww snap, I bet that sr20 is gonna pull a premium. Race wars is only a few weeks away
:D
Lmfao.
Lol looks like I'll be havin some vtak fun
can i see this hacked Crossmember?
looks good is it in yet?
Not yet . After Xmas break I need to buy a few more things .
U'll not I'll. Damn auto correct
youre gonna need a reeeeeaaally big turbo to catch me!Quote:
Originally Posted by Rendon LX-i
ill be happy with 180 or 200 :) when i get mine ;)
Already have a big turbo 70/63 garret bb. I'm saving up for forged internals. :lol:Quote:
Originally Posted by AccordEpicenter
That's easy with a LSV . That a I have a jdm y1 (tight gearing)Quote:
Originally Posted by ShyBoyCA6
We need to have a race when you get setup. Car vs car. A series vs B series. Turbo vs Turbo.Quote:
Originally Posted by Rendon LX-i
Bring slicks, not excuses
damn! im jelly haha ill probably be sticking with LSD. just hope they have conversion kits.Quote:
Originally Posted by Rendon LX-i
Epic . Would be a honorQuote:
Originally Posted by AccordEpicenter
but its vtec vs nonvtec to fit in there too not that it should make too much of a differene
Quote:
Originally Posted by AccordEpicenter
This. I love it. I'd fly out to watch.
Or maybe drive :ninja:
You have the power and that is proven, can he put it on the road. The a20a doesn't have a LSD that I know of to cross reference and Id be surprised if the washer trick works with that much power pushed through it. Would be an awesome site to see that run the 1/4Quote:
Originally Posted by AccordEpicenter
i have a lsd.;) And i'll own both of them.
Jerry do you want in on this action? Turbo 3g Race?Quote:
Originally Posted by 89T
Win or lose. You bet you'r ass.
both of you dont forget to rep 3gr! lol.
is wickedaccords car still together? We need to get a bunch of turbo 3gs for a shootout!
I am not sure. Zackidarko comes to mind for some reason.
Fuuu makes me wish i still had my car... Oh well. Next go will up there with yall.
ummm what happened to your car? I must be behind the times.... Last I read you had issues with it...Quote:
Originally Posted by Tdurr
He left it out and it got took.
shitty...
Very. Guess i need to post up some forum pics tomorrow.Quote:
Originally Posted by AccordEpicenter
Psssst! Almost had me you never had me , you never had your car lmfao. Owwwwwwwwww. Regardless I tasted what the a20 can do boosted an was impressive . But I also tasted a stock b series an to me it took less money an tuning to make a b series walk then a a series. It will be one hell of a run.
But win Or lose it would be a honor to meet you guys .
calm down Toretto... lol
Theres no fun in easy!
Either way there is no way youll do the swap and boost it for less money than a turbo A series. A series or B series, having another boosted accord around is still awesome.
And neither is a bad way to spend ten thousand dollars!
Not sure why really. I have the old racetek he used to have. He once sought out an aaron wier a series manifold for a custom turbo. That never followed through but he did acquire the b16 hatch from racetek.Quote:
Originally Posted by 89T
I guess I'll have to rep for the ClassicPrelude side and join this race :rolleyes:
btw, screw your guys' A series and B series. BT>all!!!! :devil:
My fault. I thought he ended up with wicked's car. ooh well.Quote:
Originally Posted by mykwikcoupe
Lol. I'm lovin these last two pages. Ppl are getting close to be street ready with their boosted cars.
Update. Got the finishing touches on the crossmember and got all the gaskets needed. I hope can stuff her in shorty. Im looking for itr cams and ill be getting a set of blox cam gears her shorty to. im getting stoked. I got pics BUT ill save em LOL
Pics or :bandance:
LOL. cant ban a OG heheh
