Page 5 of 19 FirstFirst 12345678915 ... LastLast
Results 101 to 125 of 475

Thread: 2nd & 3rd GEN ACCORD WEBER 32/36 & 38 HELP

  1. #101
    LX User
    Join Date
    Apr 2002
    Vehicle
    1/2 JDM B18A DOHC CARB
    Location
    MD
    Posts
    499
    I had the same problem, until Phydeaux showed his formula for distance from the throttle cable shaft. First, find out how much travel you have in your cable, from the pedal up to the pedal down(on the floor). Put that length in this formula:

    Radius =Square root of (Cable length measured) divided by 2.

    Basically divide the cable length measure by 2 and find the square root of that. And that is the distance you should be around the throttle shaft on the weber. You might find the pre drill holes on the weber are to far, mine were, and you would have to drill in a hole on your own for the proper distance. But this is the way I found I can get WOT all the time on my car.

    Also, make sure the cable is pulling in a straight line to prevent binding.

    By the way, I found my distance from the throttle shaft is around 2.4 cm or 24mm.


    Let me know if you have any questions.
    Last edited by CARBurn; 09-01-2002 at 10:45 PM.
    Carl



  2. #102
    LX User
    Join Date
    Apr 2002
    Posts
    421

    hey thanx

    i might need some more help/suggestions, but thanx for the start. Any one know what to do with that large metal piping assembly behind the carb, is that stayin or going?

    Carburn you live in DE? we should meet up some time if i ever get this damn carb running
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  3. #103
    PS don't do this with the manifold on the motor!
    I know that sounds stupid but when you're modding your car sometimes you get caught up in the moment and forget shit.
    Eric
    3geez member since October 12, 2000
    "All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau

  4. #104
    LX User
    Join Date
    Sep 2002
    Vehicle
    my tight ass 88 carbed lx accord!!! and a 95 teg
    Location
    atlanta ga
    Posts
    218
    if someone could help me i have some questions about the weber carb. my email address is [email protected]
    flipping off cops isnt a good thing?


    mods:
    Custom red and black interior by krylon, 95 gsr rims wrapped in yokohamas, apex n1 exhaust, carbon fiber hood, custom candy apple red tails, clear front turn signals, razo foot pedals, el gauges from pro car parts, carbon fiber gauge bezel, sparco color 2 steering wheel, limited editon sparco torino racing seat with 4 point clubman seatbelt, 7 inch in dash flip out screen dvd player, custom mounted kenwood flip out cd player mounted in casette holder, sei console, 2 7in. montiors to be mounted in headrest of sparcos, blue neon tubes, h4 headlight conversion with blue city lights,ngk plugs and wires

    future mod. weber 32/36 with weber intake shaved handles and trunk

  5. #105
    SEi User 87DXHatch's Avatar
    Join Date
    May 2002
    Vehicle
    '92 Toyota Paseo
    Location
    St. Paul, MN
    Posts
    1,228
    Me and CARBurn had a very spirited conversation about them a couple months ago. If someone could find that post, I think it would help you out.

  6. #106

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466

    cfm on weber carbs

    hey guys,
    does anyone knows how much cfm is weber carb 32/36 and 38?
    thanks.
    Alex.

  7. #107
    LX User
    Join Date
    Apr 2002
    Vehicle
    1/2 JDM B18A DOHC CARB
    Location
    MD
    Posts
    499
    Here is that thread if you wanna read:

    https://www.3geez.com/showthread.php?...ighlight=weber

    Hope that helps. Any other questions feel free to ask.
    Carl

  8. #108
    LX User Experimental_Honda's Avatar
    Join Date
    Jul 2002
    Vehicle
    94 accord lx, 88 sold
    Location
    ky
    Posts
    441

    Question weber carb

    yeah so can some onw help me out and tell me how much a weber carb will help me out??? how much hp will i gain from 1?? i dont really feel like shelling out like 400.00 and it not really do shit. man i cant wait for my pulleys to get here!!!!!

  9. #109
    LX User
    Join Date
    Feb 2001
    Vehicle
    '87 Accord LX
    Location
    Renton, Washington
    Posts
    194
    this is kinda off the topic of the post but don't forget to tell us if you notice a difference after the pullies.

  10. #110


    Join Date
    Jul 2002
    Vehicle
    Twin Weber DCOE Powered 88 Honda Accord LX
    Location
    Columbus, OH
    Posts
    872
    If this is gonna cost you $300, why don't you think about going dual sidedrafts (like Phydeaux, do a search for his posts on it). A dual sidedraft conversion can be done for around $500, I think. At least that's what I think my total will be on it. I do a lot of research, take my time and find the right connections when I buy, though. Phydeaux has his car running the 1/4 in the high 15 sec range with his Weber DCOEs. That is a massive performance gain. With sidedrafts, each cylinder gets it's own carb barrel. It's kinda like quad throttle bodies on 4 cyl EFI cars. If you're willing to put some time into it, you should check it out!
    Mike Clark

  11. #111
    LX User Experimental_Honda's Avatar
    Join Date
    Jul 2002
    Vehicle
    94 accord lx, 88 sold
    Location
    ky
    Posts
    441
    thanx for the info. man im thinking it might just be more fun to get some zex......the carb sounds like alotta trouble and very costly, im just looking for alotta extra hp really quick and cheaply.i can get the full system hooked up and a full tank for like 450.00. i will be sure to let you know how the pulleys work. i looking into some bullfrog cams and a few other things so i can build up and not fuck my car up with zex.

  12. #112


    Join Date
    Jul 2002
    Vehicle
    Twin Weber DCOE Powered 88 Honda Accord LX
    Location
    Columbus, OH
    Posts
    872
    That's cool. From what I've read, if I go nitrous I'll probably give Zex a try, too. I like the whole feature about the system controlling itself, opening up at full throttle, controlled by and ECU-like feature. Just sounds safer. I'm anxious to hear about the pulleys!
    Mike Clark

  13. #113
    LX User Experimental_Honda's Avatar
    Join Date
    Jul 2002
    Vehicle
    94 accord lx, 88 sold
    Location
    ky
    Posts
    441
    if i get zex im boost at 45 to 50. i want a button though none of the system control stuff. want to be able to shoot it in lower gears.

  14. #114
    LX User Experimental_Honda's Avatar
    Join Date
    Jul 2002
    Vehicle
    94 accord lx, 88 sold
    Location
    ky
    Posts
    441
    i might look into a weber, but i need to do some more stuff to my car before i get any high performance parts like boost or a weber carb.

  15. #115
    LX User
    Join Date
    Apr 2002
    Posts
    421
    ok well the throttle linkage problem is on the back burner for now, because the car wont even run, we started it for 30seconds and it started no prob, then it started spewing white smoke, no good, now no start, we still get a spark, but i have no idea why it wont start, any help would be great.
    also carburn you live in DE where at? drop me a line
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  16. #116
    LXi User 89AccordLXI666's Avatar
    Join Date
    May 2002
    Vehicle
    1989/Honda/Accord SE-i FI 5speed Coupe
    Location
    Hudson Mass
    Posts
    771
    Can some 1 please tell me what a weber is... I'm knew at what it is, I know it's a stupid question considering a good majority of you know what it is, but some one please teach me some of your knowledge of what exactly what it is and what it does.... Thanks guy's... Lataz :-)
    I will alwayz drive my 3rd gen Accord, ya'll will neva c me driving a 4 door Ford.. lol

  17. #117
    LX User
    Join Date
    Apr 2002
    Posts
    421
    ok heres a better description of the problem, the car is running rediculously rich, because it keeps flooding, we removed a spark plug and there was gas in there, it was soaked, possibly one of the vaccuum lines isnt working right or somethin, im pretty lost, try to gimme a hand
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  18. #118
    LX User
    Join Date
    Apr 2002
    Vehicle
    1/2 JDM B18A DOHC CARB
    Location
    MD
    Posts
    499

    Re: IS There a howto on installing the weber?

    Originally posted by chronicsinners
    if not there should be, let me know thanx
    Have you PM Phydeaux? He was really helpful as well, when I did the Weber Conversion.
    Carl

  19. #119
    LX User
    Join Date
    Apr 2002
    Posts
    421

    weber install q's

    1) The vacuum advance line goes from the back of the carb to where? there are 2 lines on the distributor, one closer to the front and one slightly back

    2)Did you guys hook up the vapor canister?

    more to come im sure...
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  20. #120

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    yeah, you can see the diff.
    man i wish honda had webers stock.
    Alex.

  21. #121

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    what are you doing with keihin carb?
    Alex.

  22. #122

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    when you removed your vacuum lines, did you nottice any power gain or better performance?
    i am just curious.
    Alex.

  23. #123
    SEi User Mantis88LX's Avatar
    Join Date
    May 2002
    Vehicle
    97 Dodge Neon
    Location
    Athens AL
    Posts
    1,798
    you can plug letter A, dont know about the others

  24. #124

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    well aurodeckUK and I have been taling about, he is going to take some pictures of his spare carb with vacuum lines on it, plus he will help me to wire everything, so i will have something close as he has or even less vacuum hoses.
    thanks for the info. i will use it to compare with paul's info.
    oh, the other thing, how do you remove the heater plate?
    what about coolant line that goes to carb what should i do with it?
    thanks.
    Alex.

  25. #125


    Join Date
    Jul 2002
    Vehicle
    Twin Weber DCOE Powered 88 Honda Accord LX
    Location
    Columbus, OH
    Posts
    872
    Another weber for comparison - LOL.
    Mike Clark

Similar Threads

  1. 77 Accord update - Weber!
    By bluesky6 in forum 1geez Tech & Performance
    Replies: 26
    Last Post: 12-21-2011, 04:26 AM
  2. Weber Swap Into '79 Accord Hatch
    By forrest89sei in forum 1geez Tech & Performance
    Replies: 13
    Last Post: 04-04-2011, 10:05 PM
  3. Weber carb in 88 Accord.
    By Xaisk in forum Performance
    Replies: 19
    Last Post: 03-06-2010, 06:28 PM
  4. Weber installed on 2G accord
    By it's paid for in forum 2geez Accords
    Replies: 17
    Last Post: 04-07-2004, 12:00 PM
  5. 87 Crx with weber.....will it fit my accord?
    By bradccool in forum Carburetor Tech
    Replies: 8
    Last Post: 03-16-2003, 04:28 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink