Ok what i want to do is make where the stereo is and the shifter connect, I dont need Ideas on what to make it look like, I need Ideas on where to get the plastic and how to form the plastic please help me, If you dont completly understand then the picture I drew should make you even more confused.
MSD Ignition Control: $330
B20 Engine: $2000
NOS System: $750
The look on a cops face when you press the little red button and leave him in the dust: Priceless
There are just some cars that cops cant catch, for eveyone else, theres NOS.
look for a cassette holder in the junk yard, they are pretty common around here, they do exactly what u want
-Scott
3geez member since Sept. 27, 2001
"its a shame that our society as glorified the thug life. It just churns out fearless idiots with guns " - Pimp86LX
Here is a better pic of what i want it to look like (I drew it myself)
MSD Ignition Control: $330
B20 Engine: $2000
NOS System: $750
The look on a cops face when you press the little red button and leave him in the dust: Priceless
There are just some cars that cops cant catch, for eveyone else, theres NOS.
I am not going to be on until monday, plese sms me here
http://www.mobile.att.net/messagecenter/
my # is 530-306-7792
MSD Ignition Control: $330
B20 Engine: $2000
NOS System: $750
The look on a cops face when you press the little red button and leave him in the dust: Priceless
There are just some cars that cops cant catch, for eveyone else, theres NOS.
i am making one that'yll fit in that spot. im gonna some how attach it to the sides of the console without damaging any equipment inside. Its going to be interesting to say the least.
Mods:
Kenwood Head Unit
Kenwood 6.5's allaround
Rockford 150s Amp
Pioneer 12" sub
Planned mods:
6x9's mounted next to my sub
maybe a 2 inch drop.
Next Car: 1996 prelude vtec
I was thinking of installing a dvd player w/ fold out 4" monitor down there. I have an auto, so would be outta way.
chase your dreams, not your competition
That's actually a pretty sweet idea. It's about the right size to put a little screen in there.
what im gonna do to mine is put some switches and gauges into a custom thing to fit where the cassette holder goes. i am pretty good with making custom fit stuff out of plastic. i think i will go to a hardware store like Home Depot to get some plastic. then i can always paint it to match everything. i was also thinking of taking the bottom part where the cigarette lighter and ash tray goes out. i dont smoke in my car so it has no use. i would need some time to work on it though. maybe a TV monitor would be cool to install down there.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
I too do not use the ash tray. And my cig lighter is useless. I was thinkong of pulling those out and going another inch or two on the monitor. Planning on wiring aux. cig lighter for ,later neon?, for my cell phone car charger.
chase your dreams, not your competition
I have already rebuild the casette holder, and put gauges into it, look at it on my homepage http://home.no.net/mfborge/
Later today I will put out som new pics ready mounted in the car..
all lights inside rebuild to red insted of green...
Power is nothing without control! Drive Honda, get both!
i got one of those tape holders in the junkyard n plate n filled it i used it for the switched for my neons it only took like $20 with switches wires n all that S#!T
accordlx i like the look of the thingamajig (dunno know the real name) around the auto shifter do they just fit straight on??
-Eike
__________________
Honda Is The Best
I Bought My Accord On 25th March 2002
I Wrote My Accord Off On 26th April 2003
Soon I Will Be Driving Another Honda
That is a first gen Accord manual boot. It pretty much just fit without any modification. I took off the console and it bolted right up. I now have a 3rd gen prelude shift handle on there as well. I'll post a pic of that later today.
tape holder
I was able to convert my tape holder in to a housing for my cd-player and my EQ- it looks great- with the cd player being down below I was able to cut out the ash tray and ciggarette lighter to mold my tv screen into the hole I created
rick--i love the 'accord" tag! looks awsome!
josh......take some pics!! what size lcd?
-Travis-
Ya i like how the accord emblem looks!
87 accord dx auto,k&n air filter, ,performance exhaust 2 inch pipping , black widow alarm 20% tint New escort 8500 radar ! Armrest! console
3geez member since Nov 20, 2000
Posting Permissions
Reply With Quote
Bookmarks