Results 1 to 7 of 7

Thread: New Plugs and Wire set and car wont stay on

  1. #1
    DX User Dexterk20's Avatar
    Join Date
    Jul 2014
    Vehicle
    1980 Honda Accord LX Hatchback
    Location
    Miami, fl
    Posts
    10

    New Plugs and Wire set and car wont stay on

    Hey everyone. The car is a 1980 Honda Accord LX hatchback 1.8 5-speed

    i recently just bought this car last week. Today i decided to do the oil change and clean out the stock carb. Once oil change was completely and carb was good i started her up and she still somewhat ran the same but she ran fine.

    I then replaced the spark plugs and wires. Just the wires not the distributor cap cause they didnt have it in stock anywhere. So once i replaced the spark plugs with new ones correctly gapped at 0.044 and replaced the spark plug wires and the coil wire. The car will start but it sounds like its misfiring. It doesnt idle at all. Once the gas pedal is released it drops to idle speed and within seconds begins to die and shuts off.

    I drove it around and the car seems to be hesitating or misfiring under load. It also will shut of if you come to a stop and let it idle.

    I replaced the plugs and wires with the old set and this continues to happen. I am not sure of what to do or where to go from here.

    any ideas or help i would greatly appreciate it as i am new to these cars.



  2. #2

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: New Plugs and Wire set and car wont stay on

    Recheck your work. What you describe sounds like wires going to the wrong spark plugs.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  3. #3
    DX User Dexterk20's Avatar
    Join Date
    Jul 2014
    Vehicle
    1980 Honda Accord LX Hatchback
    Location
    Miami, fl
    Posts
    10

    Re: New Plugs and Wire set and car wont stay on

    Quote Originally Posted by Dr_Snooz View Post
    Recheck your work. What you describe sounds like wires going to the wrong spark plugs.
    Hey Dr. Snooz thanks for responding. After taking a break yesterday for a coupe of hours i went back and figured it out. The firing order o the distributor cap was wrong to begin with. Dont know why crap went haywire with just changing plugs and wires when i did one by one but oh well. The car is running fine now without a problem. Thank you again

  4. #4
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: New Plugs and Wire set and car wont stay on

    It's pretty easy to mess up the firing order on those cars. I believe it has no mark or anything on it even

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  5. #5
    DX User Dexterk20's Avatar
    Join Date
    Jul 2014
    Vehicle
    1980 Honda Accord LX Hatchback
    Location
    Miami, fl
    Posts
    10

    Re: New Plugs and Wire set and car wont stay on

    Quote Originally Posted by Hazwan View Post
    It's pretty easy to mess up the firing order on those cars. I believe it has no mark or anything on it even
    yeah Hazwan it took some image searching on google to find out which distributor cap it had and to find out the number 1 marking on it. One question I did have on the distributor cap is since the cap only has two positions you can clip it in on what side does the number 1 have to be on the front or back or it doesn't matter?

  6. #6

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: New Plugs and Wire set and car wont stay on

    It doesn't matter so long as the rotor is pointed at the #1 plug with the engine at TDC.

    My first time changing plug wires, I pulled them all off and then looked sheepishly at my brother for help putting them back on. I got a good cussing and was forced to figure it out on my own. I did but it was a lesson learned. :duh:
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  7. #7
    LX User
    Join Date
    Jan 2012
    Vehicle
    1988 Honda Accord LX (Carb <--*flame... FWOOSH*)
    Location
    Boise, Ideeho
    Posts
    182

    Re: New Plugs and Wire set and car wont stay on

    I'm curious what kind of damage this does to your motor?
    Mods:
    - Koni super street coilovers
    - TSW Mallory 4 black rims on 215/55/15's
    - TRW +1.5o camber kit
    - Weber 38/38 with full emissions compliance

    If you want to purchase from me, you can pay CC as I use Square and can accept VISA/MasterCard/Amex.

Similar Threads

  1. 88 accord wont stay on
    By dogcatman34 in forum 3geez Accords
    Replies: 3
    Last Post: 10-24-2011, 06:06 PM
  2. 1988 Honda accord wont stay on
    By dogcatman34 in forum 3geez Accords
    Replies: 1
    Last Post: 10-22-2011, 10:10 AM
  3. Hard too start and wont stay on
    By Lg310 in forum Carburetor Tech
    Replies: 1
    Last Post: 08-30-2011, 06:46 PM
  4. ahh, why wont it stay running?!
    By 87AccordLXsdn in forum 3geez Accords
    Replies: 6
    Last Post: 06-06-2006, 10:28 PM
  5. Help Car Wont Stay Running!!
    By B16KILLA in forum EFI Tech
    Replies: 9
    Last Post: 04-05-2006, 08:56 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink