OK i think i got it!!!:super: :super:
OK i think i got it!!!
87 accord dx auto,k&n air filter, ,performance exhaust 2 inch pipping , black widow alarm 20% tint New escort 8500 radar ! Armrest! console
3geez member since Nov 20, 2000
Wow! Then i sleep, you make in this topic real Hell)
So, how i understand, my idea with þÅØÀÀ and 300dpi is not work on many computers... :-( Idea with MS Word - is not best way, because it's make small corrections on imagesI want to help all of us to correctly print my gauges, if it needed - i can reupload gauges in another format with correct dpi.
Please, write what problem do you have? And how you print my gauges? In that program?
ok paul first of all you did a really good job on these gauges and they are very much appriciated. anyways. the dpi that they were exported with were 56 dpi (well at least the ones that i got)on the first page you will see that i wrote a mini how-to on how to convert them using a photo program. if you want you could just upload the .tif itself. it only runs about 738 kb.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
First I completly demonted everything, included remove the needles and the plastic plate, the I cleaned the plastic plates completly from paint and everything, then I printed the gauges out on a self-adhesive photopaper. I had already painted the needles red and made lights red.
Here is the result:
Here with lights on, ant blitz on the camera...
And here without blitz:
A little to strong light, so I think I have to paint the plates behind any just white light infont of them...
Power is nothing without control! Drive Honda, get both!
A little to strong light, so I think I have to paint the plates behind any just white light infont of them...
I take this from the start...
A little to strong light, so I think I have to paint the plates behind, and just have white light infront of them...
Power is nothing without control! Drive Honda, get both!
dont do that you just need to use heavier paper. what if you paint them to dark them it will be a bitch to get the paint of without messing the look of the gauges off. just use a heavier paper.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
I don't really understand what you mean, I want to paint the backside of the plate complitly black so it dos not come any light through it... And just have white light shining down to them from the top...
And isn't it just one type of self-adhesive photopaper?
What I can do, is maybe to paint it white on the backside and get a little light through...
Power is nothing without control! Drive Honda, get both!
oh i see what you mean. that might work.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
![Defiant[YD]'s Avatar](customavatars/avatar389_2.gif "Defiant[YD]'s Avatar"){kind=avatar}
i got a prob here. when i use photoshop and change the width to 3400, the constrian properties gives me a return value of 1231 for the height. (all of this is in 300 dpi, and i just downloaded the gauges)
1989 Accord: Back to Stock
2007 Accord: Stock
1991 Civic SI: bunch of stuff done.
the width is supposed to be 3417
height is supposed to be 1200 try using 3417
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
shit, sorry, i did set it at 3417, not 3400. it gives me a height of 1231
1989 Accord: Back to Stock
2007 Accord: Stock
1991 Civic SI: bunch of stuff done.
WOW I DIDNT NEED TO EVEN ASK ANY QUESTIONS, U GUS HVE ANSWERED THE MALL FOR ME. THX PAUL
SO SOCIAL YOU THINK HEAVIER PAPER IS GOOD??
i got it! thanks JOE and paul! i printed it at school on a color laser printer and it looks great... now i just gotta find time when i can do this when i wont have to drive!
Travis
www.cardomain.com/id/dxhatchback
the only reason i suggested heavier paper is so the light does not show thru as well on the back of the gauges.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
Ok so for the furl and temp gauges dont take the needles off right? and if I move the needles, by bumping them accidentally they should still work? will they correct themselves or will they have to be put back in the proper space? also does that apply for the 86-87 gauge clusters?
- Drive it like a Rental!
My 89 Ex-i on Car Domain
Ok so for the fuel and temp gauges dont take the needles off right? and if I move the needles, by bumping them accidentally they should still work? will they correct themselves or will they have to be put back in the proper space? also does that apply for the 86-87 gauge clusters?
- Drive it like a Rental!
My 89 Ex-i on Car Domain
can someone make a how to on this and put it into the how to section??
-Eike
__________________
Honda Is The Best
I Bought My Accord On 25th March 2002
I Wrote My Accord Off On 26th April 2003
Soon I Will Be Driving Another Honda
I NEED A FAVOR CAN SOMEONE MAKE THEM BIGGER FOR ME CAUSE I DONT HAVE PHOTO SHOPE I HAVE THE SPEDO ONE IN RIGHT NOW LOOKS SOOO BAD AND I BUSTED THE DAM SPEDO HOW DO U GET THE OUTHER ONES IN WITH OUT TAKEING OFF THE NEEDILES
if u could email them to me at [email protected] p.s i can make them diverent colours blue looks badass
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
o yea i need kmh and inword gas
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
Do you just put the gauges over the stock ones or do you replace them?
when i resize the gauges to 3417, and 1200 (at 300 dpi), they don't look right. like, i overlayed a scanned image of my tachy on top of the resized tachy that paul made, the resized one is out of proportion. so are u sure that 3417 and 1200 are teh correct dimensions???
1989 Accord: Back to Stock
2007 Accord: Stock
1991 Civic SI: bunch of stuff done.
It took me a little while to get the sizing to work right but now That I got them printered on some photo paper on super ink wasteing mode and wholely crap they look really good and the tach going to 9 grand nice touch
88 Accord LX
A20A1 5 Speed
Custom Machined Single Plane Open Plenum Intake Mainfold
Weber Carb.
Delta 282 .396 lift 4000-7500 Cam
Lowered 2" with 16" Rims, 2 1/4
CatBack Exhaust
Otto Racing Muffler
Future Mods:
A18 with the Acura Pistons ballenced and blueprinted for my port and pollished head.
OK WILL SOMEONE PLEEEEEEEEEASE SEND ME THE RIGHT SIZED ONES FOR KMH INWORD CAUSE MY DAM DASH IS RIPED APART ALREADY AND HAS BEEN FOR 2 DAYS IM LIKE BEGIN HERE I NEED HELP A.S.A.P EMAIL THEM TO ME AT [email protected] PLEASE AND THANK YOU
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
OK WILL SOMEONE PLEEEEEEEEEASE SEND ME THE RIGHT SIZED ONES FOR KMH INWORD CAUSE MY DAM DASH IS RIPED APART ALREADY AND HAS BEEN FOR 2 DAYS IM LIKE BEGIN HERE I NEED HELP A.S.A.P EMAIL THEM TO ME AT [email protected] PLEASE AND THANK YOU
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
yah same here. could someone also send me the right sized gauges (KM and Inward fuel/temp)
[email protected]
1989 Accord: Back to Stock
2007 Accord: Stock
1991 Civic SI: bunch of stuff done.
Posting Permissions
Reply With Quote
Bookmarks