how do u get them to stay up are u guys glueing em on the stock gauges????????
how do u get them to stay up are u guys glueing em on the stock gauges????????
-Scott
88ancient
-Its not illegal until you get caught-
You are definity The Man Paul... Thanks alot for your free Gauges, I needed some new ones... Can't wait to install them... Lataz
I will alwayz drive my 3rd gen Accord, ya'll will neva c me driving a 4 door Ford.. lol
[email protected]
MPH, AT
Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC
Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights
Damn, there's alot of double posting in here.
Can it be so damn hard to print them out, just paste them into word and set the size for each, 10x10 for speedometer and 8,8x8,8 for the others.
And print them out onto self-adhesive photopaper and put them ontop of the old one!
And paint the needle, black or red or something...
Power is nothing without control! Drive Honda, get both!
And paul, good work! they are hot!
ehh... Want to make for voltmeter, oil temperature and oil-pressure gauges too? the standard one's that are 52mm...
You can see my ordinary below
Power is nothing without control! Drive Honda, get both!
JUST WAIT 1-2 DAYS
I making new versions "ready for print"!
OK I TRIED IN WORD AND ITS MESSED UP IM STUPID WHEN IT COMES TO THAT STUFF WILL SOMEONE PLEASE PLEASE PLEASE E-MAIL THEM TO ME I WILL BE SOOOOO GRATEFULL CAUZ MY DASH IS ALREADY APART SO I NEED KMH STANDERED INWORD GAS GAUGE SO PLEASE O PLEASE O PLEASE E_MAIL THEM TO ME [email protected] THANKS A HOLE BUNCH TO ANYONE WHO CAN HELP
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
jamen jay calls it a shift bag too!!! im not alone!!!
Travis
www.cardomain.com/id/dxhatchback
will someone please help me like come on i really need to put my dash togeather i got pulled over and the dam cop thout i stole the car he he it was pretty funny thow so once agian im going to try and beg for someone to email me some white face gauges that are the right size in kmh 5spd inword and i need outword too cause i might get a new cluster save 100 thousand he he he
email is [email protected] and i will post when i get some so dont think that i got them untill u see me post thanks in advance l8er
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
I painted tha gauges completly black on the backside and put just white light down to them, looks good with my red light interior!
With lights on:
Power is nothing without control! Drive Honda, get both!
Hello all. I just found this site a few days ago and came across the gauges yesterday. I downloaded the file then opened it and all I get is Russian writing.The gauges are tight as hell and I want a set for my Accord. So if anyone can help with this I would be greatful, or if someone could send me the file to my e-mail at [email protected]. The one I need is mph only outward. Thanks for the help
Can you tell more about what you see, then open file?
I don't make any files in ZIP archive in russian!
Paul why dont you do it so the gauges are the right size when they are downloaded??
-Eike
__________________
Honda Is The Best
I Bought My Accord On 25th March 2002
I Wrote My Accord Off On 26th April 2003
Soon I Will Be Driving Another Honda
if not could somone please send me this one:
KMH and MPH speedometer
Inward Fuel/Temp gauge, AT
thanks
[email protected]
Last edited by Toby; 12-22-2002 at 06:32 PM.
-Eike
__________________
Honda Is The Best
I Bought My Accord On 25th March 2002
I Wrote My Accord Off On 26th April 2003
Soon I Will Be Driving Another Honda
I not make "right" versions because i don't know why it's print incorrectly!On my computer it's work good.
So, try to print this image and talk to me how it's look:
http://www.pauldesign.ru/photos/kmh_..._inward_at.jpg
426 Kb
Hey Paul when I go to opne the file from its current location it goes right to microsoft word the a screen pops up that says to translate so that it can be read on my computer I press ok then microsoft word comes back up with jusk pk then some squares after that so I cant figure out how to get the gauges to come up to print. The gauges look dope and I want to get a set in my car as soon as possible so any help would be great. Thanx
they are still HUGE!
sorry paul
Travis
www.cardomain.com/id/dxhatchback
paul the gauges are fine. some people need to learn how to resize documents, and how to change their printer settings. if you are viewing a 300dpi image for it to come out the right size you will need to print out in 300dpi, its as simple as that. if for some reason your printer cant handle that, then open it up in photoshopl, and change the resolution to 150, or 100, or whatever your printer needs. also if you dont have photoshop. go download jasc paint shop pro. its a lot easier to use than photoshop, and i think it can change picture DPI...
good luck all. and dont pester paul to change the guage, it took me a few trys but i have it perfect now. another think you can try is "fit media to page" if you do not select that option it may print out way too big.
anyway its possible, just play with your setting.. GL. :P
ps, unless you all have photo printers, it prolly wont look good. take it to kinkos, and for a couple dollars have them print it on matte photopaper... that way you get it done right..
Hey Paul, Ive been trying to get the gauges to open up for three days now with no luck. I havent the foggest idea of what is going on. I dont have a problem with sizing them or anything like that I just need to be able to open up the mph only outward so if you or anyone here can send them to my e-mail or post a link here to get to it that would be greatly appreceated. Thanx in advance for any help ofered with the issue I seem to be having
Check your mailOriginally posted by 86lxsoontobei
Hey Paul, Ive been trying to get the gauges to open up for three days now with no luck. I havent the foggest idea of what is going on. I dont have a problem with sizing them or anything like that I just need to be able to open up the mph only outward so if you or anyone here can send them to my e-mail or post a link here to get to it that would be greatly appreceated. Thanx in advance for any help ofered with the issue I seem to be having
Hey Paul, There is nothing in my mail so if you sent it to me could you resend it to [email protected] when you get a free min. Your help to see me through this has been killer. mph only outward 5speed. Thanx again for the help and look forward to seeing what you do next.
Last edited by 86lxsoontobei; 12-24-2002 at 07:41 PM.
I send it to you. I can't do it yesterday, because your mail is hidden.
Can someone please explain the differnence between inward and outward?
Posting Permissions
Reply With Quote
Bookmarks