Just recently did the white face guages, and they look awesome, but haveing trouble getting, them back in right. I can't get the fuel and the temp guage needles back in and i can't figure out where the white dangliy piece that is on top goes. It was screwed in , but not any more. Please help
the needles should go back in the same way the tach and the spedo do ... you just push them back in ... you didnt happen to break the little pin that holds the needle on did you ? and i dont know what the white dangily thing is ...lol
Jay
i sure is hell hope that i didn't break the needle off in both of them. This is gay
Next time don't take the needles out. Just slide the gauges through. Then you won't need tylenol
Man I did the same thing and my fuel and temp gauges are all screwed up now. Everything else is working fine. I was able to put the needles back on but the temp is all the way up and I am not sure if the fuel needle is reading correctly. somebody help us.
88 Accord LXi coupe- Trust exhaust, front mount cool air intake, (17" rims)-switched to 16" alum. lowered 2.5", DC headers, msd ingnition, pilot fogs, recaro seats, white/blue face gauge, stage 2 clutch, 2001 corvette tail lights, 2-12" mtx subs, phoenix 1200 amp, infinite 6-9". A/C GONE.
this is gay
nobody ever wants to help
I broke my needles a couple of years ago, I ended up having to go to a junkyard and getting a whole new gauge cluster.
-Ryan
Pure White 1988 DX Sedan
"It takes a big man to cry. And, an even bigger man to laugh at the big man crying"
if you get new cluster, slide fuel/temp over. I didnt remove any needles at all. NO PROBLEMS. the fuel/temp gauge had to be glued down.
chase your dreams, not your competition
no body ever wants to help ?Originally posted by redricer89
this is gay
nobody ever wants to help...when you take the needles off you have to put them back on in the same position they were in when you took them off. ... like if your gas guage was reading half a tank ...then you need to put the needle back on to read a half a tank
Jay
Fill your tank with gas and push it up all the way. THe temp gauge needs to be at the bottom then turn car on and let it warm up and see if it moves and if it goes to high push it down to where it should be when ur car is warmed up. Also if u break any needles just go buy a cluster off ebay or junkyarrd and switch out the shit whats it called.... the thing with how many miles u got..--
oh well u can take that part off with a few screws and put it new the new cluster and then you would be good.!!!
87 accord dx auto,k&n air filter, ,performance exhaust 2 inch pipping , black widow alarm 20% tint New escort 8500 radar ! Armrest! console
3geez member since Nov 20, 2000
Posting Permissions
Reply With Quote
Bookmarks