Page 1 of 2 12 LastLast
Results 1 to 25 of 44

Thread: so cal

  1. #1
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469

    so cal DYNO meet 2003

    anyone interested in another so cal meet.. please post now. to how many there will be will determine when.. i already have the place to meet.. i talked to a dyno owner.. and he said 10-15 cars, two runs each for 40 bucks. now this is not, I REPEAT NOT a dyno tune. only to see ur horsepower curve. the more the better. but before we go to the dyno machine,. we will first meet off at a park and wait for everyone. then head over to the dyno. and joel, if u get this. im gonna need ur help again with this one. like i said, the meet woudnt have happened last time if it wasnt for u. thanks again. hope everyone in so cal can make it. plus! make sure u get ur car correctly set up for the dyno runs. late

    jon
    Last edited by wickedaccord; 12-23-2002 at 11:40 PM.



  2. #2
    LXi User BensAccordLxi's Avatar
    Join Date
    Aug 2002
    Vehicle
    1995 Eagle Talon TSi Turbo
    Location
    Tucson, Arizona
    Posts
    889
    See the post called Arizona 3geez!!!! It's already being planned.
    R.I.P. 1988 Honda Accord LX-i hatchback

  3. #3
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    yep Jon were shooting for end of february or beginning of march. i want to let ppl get there mods in first. My friend that came with me last time you remember the gold hatch. trevor. he is doing a b20 swap as we speak and i am waiting to put my reground cam in. i and talking with a newly found member that jsut joined form the area. so thats one more. ben is trying to get some arizona 3geez out here for march. it we can only wait just imagine how killer it would be. 10-14 of us plus 10+ or arizona peeps. thanks for the credit. everyone that came deserves just as much. now lets see if we can get a meet going. maybe we might try for end of january it all depends on what everyone else says. but as you know im definetly down. this would be great because there is a lot of speculation on what mods do to the horsepower of the a20 (well not for you mr. gsr) :lol i think it would be great.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  4. #4
    LXi User BensAccordLxi's Avatar
    Join Date
    Aug 2002
    Vehicle
    1995 Eagle Talon TSi Turbo
    Location
    Tucson, Arizona
    Posts
    889
    I can't go to Cali till atleast mid March. I work for Intuit, they are the ones that make Turbo Tax. Well, Tax season requires me to do manditory 50hr weeks and no vacation till mid march early april. If we could hold out for a bit, I'll be able to make this one.
    R.I.P. 1988 Honda Accord LX-i hatchback

  5. #5
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    im down with that. 5o hours week damn that sucks. i like the turn out of the last meet so i would definetly want moreppl to show for this next one. iwould love to see some az peeps here next time. what do you think Jon?
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  6. #6
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    would be great.. the more the better. hell if we can get more that 15 ppl im sure the owner of the dyno place (jerry) would hook it up even cheaper. and 40 bucks isnt bad.. imagine 30 or 20 bucks a car for two runs! get all ur shit done! do ur homeworks! i would like to see a20 horsepower curves as well. honestly i can careless about mine, i would prefer to see a20's and see wat kind of hp gain it can make. as for march.. that's fine with me. the later u guys make it, the more im gonna have done to my engine. im already ready to put the skunk2 stage 2 cams in on monday. if anything, i should MAYBE have a TYPE R head in by march. MAYBE so we'll see. good luck to u all. thanks joel, late

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  7. #7
    DX User
    Join Date
    Jun 2002
    Vehicle
    1989 Honda Accord HB DX
    Location
    Studio City, CA
    Posts
    76
    I'm interested. I have class every Saturday though until 12:30pm but I can try and catch up with you guys.

    What happened at the last meet? Any pictures?
    1989 Honda Accord DX Hatchback - 155k miles and going.

  8. #8
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by 89AccordDXHB
    I'm interested. I have class every Saturday though until 12:30pm but I can try and catch up with you guys.

    What happened at the last meet? Any pictures?
    behold i have pics.

    https://www.3geez.com/showthread.php?...ght=soCal+meet
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  9. #9
    DX User
    Join Date
    May 2002
    Vehicle
    1989 Honda Accord Lxi Coupe
    Location
    Camp pendleton,CA
    Posts
    93

    Talking stop the War

    damn I hope I don't have to deploy and go over see's I would love to be here for the meet- thanks jon for the F.I. head- I am going to have chris do some work on it when he gets the chance- I would like to have it on and be here to run with you guys- I hade a great time at the last meet- nothing new has been done to mine- still needs some minor body work with the kit before I can get it painted- later guys

  10. #10
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    hope you can make it.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  11. #11
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    well i jus hope a lot of u cali ppl can make it this time that way we can really enjoy this one. i will most likely have my car tuned by then becuz i jus got my stage 2 cams in and the timing is horribly off so i need to tune it as soon as i get my ecu in. let me know when u wanna do this joel so i can get things set up for the dyno's. as for the a20 head, it's no problem josh. glad i could help. if u need axles let me know. i have 2 axles lying around also for stick. late

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  12. #12
    LXi User BensAccordLxi's Avatar
    Join Date
    Aug 2002
    Vehicle
    1995 Eagle Talon TSi Turbo
    Location
    Tucson, Arizona
    Posts
    889
    Hey Wicked, where did you get your swap done at?
    R.I.P. 1988 Honda Accord LX-i hatchback

  13. #13
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by BensAccordLxi
    Hey Wicked, where did you get your swap done at?
    ala wicked and his friends
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  14. #14
    DX User
    Join Date
    May 2002
    Vehicle
    1989 Honda Accord Lxi Coupe
    Location
    Camp pendleton,CA
    Posts
    93
    jon- I could always use the axles as spares- how much- let me know- thanks
    mods-4th gen extreme kit-3rd 3en kaminar sides,matrix short ram air, ADR 17" rims- ACT stage 2 clutch- NGK 8mm wires- Denso irridium plugs-accell 5.25 tv-dvd- 3 blaupunkt over drive 12's with clarion power amps-and kenwood exceleon components- soon to be dc sports header

  15. #15
    LX User hoho1217's Avatar
    Join Date
    Nov 2002
    Vehicle
    87 Accord Lx-i sedan
    Location
    So Cal
    Posts
    140
    ok, im down for this meet =D, i can bet i'll have one of the worst dyno runs u'll see on a 3gee, lol

  16. #16


    Join Date
    Jul 2000
    Vehicle
    2000 Audi S4 Twin Turbo/ 2007 Honda Fit Sport/ 2010 Ford Flex Limited
    Location
    Temecula, CA
    Posts
    2,290
    If someone would give me some money, I could get my turbo accord done..


    1-11-2014 Dyno Day
    587 - AWHP
    454.6 -TQ
    http://youtu.be/TqCtTbjQqFg

    www.tvme.info

  17. #17
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by 88turboaccord
    If someone would give me some money, I could get my turbo accord done..

    trying for donations again heh.

    "if at first you dont succeed, pull a gun on everyone and demand" :lol
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  18. #18
    LXi User BensAccordLxi's Avatar
    Join Date
    Aug 2002
    Vehicle
    1995 Eagle Talon TSi Turbo
    Location
    Tucson, Arizona
    Posts
    889
    If some one would give some money I could have Hybrid Garage do some professional race tuning on my B16
    R.I.P. 1988 Honda Accord LX-i hatchback

  19. #19
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    Originally posted by joshuabrack99
    jon- I could always use the axles as spares- how much- let me know- thanks
    ill let u have it for 80 bucks both of em??? and yes a friend of mine did the swap for me. as for the ecu part, JPR did it for me. jus got my stage 2 cams in and the timing of the motor is horribly off. biiig dip in my power band so i will most likely get a dyno tune before the meet and do another hp dyno.

    jon

  20. #20

    maka_RTH's Avatar
    Join Date
    Nov 2001
    Vehicle
    '95 Supra, '08 CBR 600RR, '89 LX-i Coupe (R.I.P.), '88 LX-i Sedan (R.I.P.), '87 LX-i Sedan (R.I.P.)
    Location
    Orem, Utah
    Posts
    1,782
    Originally posted by joshuabrack99
    damn I hope I don't have to deploy and go over see's I would love to be here for the meet
    yah, if it's in march i should have my 5spd conversion done and hopefully a reground cam in. i'd head on down to socal if i have the money and that stuff done. i think it'd be fun that is, if i'm not activated... (knock on wood) lol
    Greg

    1989 LX-i 2dr 5spd (R.I.P.)

    2008 CBR 600RR -- 1995 Toyota Supra NA -- 2013 Nissan Frontier Pro-4x

  21. #21
    DX User
    Join Date
    May 2002
    Vehicle
    1989 Honda Accord Lxi Coupe
    Location
    Camp pendleton,CA
    Posts
    93
    hey jon- I met a friend of yours named lynn to day- he has a silver civic and was changing the head at the auto hobbie shop on base- said he new you- small world- later
    mods-4th gen extreme kit-3rd 3en kaminar sides,matrix short ram air, ADR 17" rims- ACT stage 2 clutch- NGK 8mm wires- Denso irridium plugs-accell 5.25 tv-dvd- 3 blaupunkt over drive 12's with clarion power amps-and kenwood exceleon components- soon to be dc sports header

  22. #22
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    lynn???? wat's his last name?? i only know of one lynn.. strange and it is a small world
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  23. #23
    LXi User BensAccordLxi's Avatar
    Join Date
    Aug 2002
    Vehicle
    1995 Eagle Talon TSi Turbo
    Location
    Tucson, Arizona
    Posts
    889
    Hey Wicked, I'd come out to the meet but I'm still in the process of getting the swap done. Did you do yours your self or did you have a shop do it? Let me know because I could save alot of money and time if you could help with the swap.
    R.I.P. 1988 Honda Accord LX-i hatchback

  24. #24
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    a friend of mine did it for me. it was rather easy. only hard part was wir
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  25. #25
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    well this is what i should have done before the meet. im stripping my car of paint now. then im am painting it. and hopefully lowering it too. this meet is going to be fun
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink