Project Aerodeck

[im_the_snoman]

So i have officially started my Aerodeck project and good god. I may have went a bit overboard this month haha!!
So far this is what i have ordered:
*parts that have arrived
#parts installed

#Ground Control Sleeves
#Koni Yellow Dampers (89-91 civic)
#Cheddas Extended Top Hats (front and rear)
#Cheddas Billet Rear Control Arms
Moog Front Lower Ball Joints
Moog Front Outer Tie Rod Ends
Complete Prothane Bushings
Royal Purple Oil Filter
#Kenwood 10in Subs (2)
#Kenwood 1000w Amp
#Belva Amp Kit

Things that still need to be ordered:

2nd Gen Prelude UCAs
Rear Ball Joints
New Brake Pads
New Rotors (anyone make a "bbk" for this car?)
ARP Extended Lugs
Wheel Bearings
New Steering Rack
Inner Tie Rods
Motor Mounts (who makes replacements?)
New IACV
Kevlar Whale Penis Intake (very important )
Battery Relocation Kit
#Bucket Seat Mount (i really need help with this one)
i cant remember any others.

oh powdercoat alllll the things.

WARNING!! Picture Overload Imminent

[im_the_snoman]

[URL=http://s372.photobucket.com/user/transworld12008/media/Aerodeck/20150124_235831_zpsakaxoyvm.jpg.html]

[im_the_snoman]

[/URL]

[im_the_snoman]

Oh did i mention i had a blue interior? I guess i just HAVE to put this in then

[im_the_snoman]

And I may catch some flack for this but im having my headliner and speaker grills redone in Louis Vuitton Monogram fabric.

Until next time. When i actually get to put parts on the car. I is excited!

[im_the_snoman]

Looky what just came in = )


And these are on their way! Cheddas makes some good shit!

The first thing I ordered were gc sleeves and they still arent here. Im going crazyyy!!
But i did get in a brand new Mugen oil cap and radiator cap. Cant wait til things start coming in. Itll be a fun weekend

[79cord]

Yes I does look like are going a bit crazy on it, and is already a beautiful thing!

[im_the_snoman]

Thanks!

[Hash_man_Se_i]

That is a great looking Aerodeck! Good luck with the build, that is a nice stack of parts you ordered, can't wait to see the progress.

[im_the_snoman]

Made some good progress this weekend. Front and rear top hats, koni yellows, G/C sleeves and LCAs installed. Huge shoutout to Cheddas. Not only does their shit look fucking bonkers but it fits exceptionally well. Everybody walking by my stall today stopped and looked. Hurry up and make more parts!! Haha jk but seriously. Im going to be running everything they make. Next project is to find a seat bracket for my Bride Zeta and design a t-line sub box for the back.

[Tdurr]

thats so sexy.....

[im_the_snoman]

I stepped back to a 15in wheel and im really happy. It was a great day and with a little more suspension work ill bring the rear down another .75 in and the front another 1.5 in.
Seat bracket i made feom the stock bracket and an old bride bracket out of my old rx7.

[dkjay]

Your car is absolutely gorgeous, you are revolutionizing this site and interest in 3geez. Bravo!

[im_the_snoman]

Thank you! I dont know about revolutionizing anything but this will be my last honda build so i wanted to go all out.

[im_the_snoman]

I did start polishing the valve cover tho. Intake manifold and exhaust heat shield is next unless someone can sell me a really nice tubular manifold. Id love to have one of those.

[Calabek]

I stepped back to a 15in wheel and im really happy. It was a great day and with a little more suspension work ill bring the rear down another .75 in and the front another 1.5 in.
Seat bracket i made feom the stock bracket and an old bride bracket out of my old rx7.





[URL=http://s372.photobucket.com/user/transworld12008/media/Aerodeck/20150328_161714_zpsvb3z9ozm.jpg.html][/URL

Brilliant choice of wheels, mate !
Definitely agreed with the above "revolutionising" comment ! Well done.
I hope you don't mind but I posted some photos on my Facebook page.

[im_the_snoman]

Brilliant choice of wheels, mate !
Definitely agreed with the above "revolutionising" comment ! Well done.
I hope you don't mind but I posted some photos on my Facebook page.

Wow i really appreciate the love guys. Hopefully this will bring the 3g some much needed recognition. And no man! Share away! Tag me, my name is Ben Drinkard.
Btw if anyone has a nice tubular exhaust manifold or dc strut bat send me a message. Or any really rare 3g parts honestly. id love to have them. Did Mugen make any parts specifically for the 3g? Im still looking for a mugen mf204 valve cover.

[Fedor B.]

Hee, sharp looking Aero you have there.
I mist you coming on here.
For Europe the B engine in a Aerodeck is super rare. U know how many HP left in your's?
LOVE the Cheddas!

[im_the_snoman]

Hee, sharp looking Aero you have there.
I mist you coming on here.
For Europe the B engine in a Aerodeck is super rare. U know how many HP left in your's?
LOVE the Cheddas!

Thanks. Considering the car only has 120k id assume most of what it came from the factory with. And im not really concerned with power from the stock motor as the car will be k swapped when the car gets back stateside.

[Jon D]

Hey man you came across my Instagram account recently. I own 1 of the 2 Aerodecks stateside. I'm excited to chat with you about our cars. Shoot me a pm with your contact info. Your car looks bad-ass man!

- Jon D

[im_the_snoman]

Hey man you came across my Instagram account recently. I own 1 of the 2 Aerodecks stateside. I'm excited to chat with you about our cars. Shoot me a pm with your contact info. Your car looks bad-ass man!

- Jon D

Thanks man. My facebook name is Ben Drinkard. Message me on there.

[im_the_snoman]

Haven't updated this but I'm almost back to the states and ready to make some progress. Ordered Cheddas UCAs and radiator stays as well as Fortune Auto 500 coilovers.
Talked with Jordan the owner of Cheddas and Kseries mounts should be ready at the end of the year so I'm really excited to get the swap started. Decided to go with the K20A with 6spd and factory LSD and utilize a S2K cluster. Still need to order cheddas traction bar and his triangulated front strut bar.
While the swap is going on I will be pulling the interior and seam welding the whole chassis as well as fabbing up a triangulated strut bar for the rear and designing some underchassis bracing.
I'm overseas for another 5 weeks then it'll be time to get to work. Been busy dealing with other projects and it's hard to get anything done when you're on the other side of the world. But stay tuned for updates and more shiny things!

[im_the_snoman]

Just realized there are a couple things I did before I left that I never mentioned lol. I sold my Bride Zeta III and installed one of my AAR Weds Carbon seat and a new steering wheel setup. Chrome extended hub, chrome NRG quick release and a Blue Suede Personal wheel. Sooooo Fawncehhh...
I also found a few rolling shots from back in Japan. Excuse the quality they are by no means professional.
By the way if any of yall want another 3g dude on your IG my handle is Boosted_Ben_

[Tdurr]

Ohh you got some nice coilovers! Did you have them mat her or just called and ordered?

[MessyHonda]

so cool