where does it go ? i cant find it
where does it go ? i cant find it
Jay
o there we go i found it in the faq section
Jay
damnit i found it but how the hell do you get it out ??
Jay
lol nevermind again i got it.... you just pull it out
Jay
Hey Neuspeed87lx maybe you can help me then. I was going to buy a PCV valve yesterday and the guy gave me this little thing. I thought the pcv valve was that little tube that connects onto the inake manifold. The guy gave me the pcv valve and I said I don't think this is what I'm looking for. Do you have to take the tube off and take out the little valve? Thanks a lot dude.
yea you need to take the black u shaped tube off to get to the pcv valve its on the left side ... the pcv valve is this little metal thing ...its about an inch and a half long ... it was kinda tough to get out but i just pulled on it straight up and it came out ..then i just put the other one in and put the black tube back on it ..let me know if you need more help
Jay
i have no clue where it is on mine i let the mechanic do that when it comes to doing the tune up stuff i'm stumped
on the intake maifold check the faqs !
MIKE
3geez member since October 4th 2001
my PCV valve wont stay in the hole. i push it in and it just pops right back out.
-T.C.
Originally posted by HostileJava
are you making fun of me because I think coroncho80 is hot?
Well I guess I have to go back to the store and pick it up and install it. 88 Acccord DX, what I would probably do is warm up the rubber hose and then try to put the pcv valve in. It should expand the hose a little bit. And it's really easy to find if you know where the intake manifold is.
you dont put the pcv valve into the hose ...its goes into the intake manifold then the hose just slips over it
Jay
Oh my bad. I was mis reading my pic from the haynes manual.
Posting Permissions
Reply With Quote
Bookmarks