Is it possible to get turn signal side view mirrors for the 3G???
Holla bacc doggie!
Is it possible to get turn signal side view mirrors for the 3G???
Holla bacc doggie!
"I'm the macc on the blocc/ girls be jaccin the cocc/ bobbin up and down like they was a jacc in the box/ on the real when I was young I used to jacc it alot/ but now I'm old, so I only use it to fucc/ war wit me, yo you gone be losing your lucc/ cuz you against me, is only gone be proving you succ/..."
i heard older celicas used to have them. try that.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
There are loads on the neti u look arround, universal ones.
They look like the BMW M3 (E36) mirrrors with a small side repeater built in the front, they look cool, ma m8 had em on his Vectra and he shaved the stock side ones. Looks mint!!
Ride wit us or collide wit us
:badass:
MY OTHER RIDE IS YO BITCH
I think their might be a aftermarket company that makes a kit to adapt them to all kinds of cars. Don't remember where I saw it.
i just realized i have an old side miror assembly from a SAAB!!!! they simular in design.....i can just practice it there and figure it out.......before i hack up the 3g
-Travis-
I was planning on making mine custom out of the stock 3g mirror. Just drill a hole in the case, attach a side marker, run the wires w/ the power mirror wires and you got your self some custom turn signal mirrors!
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
i was gonna do something kinda like Chrome_thangs except cut out a square (2 in. x 2 in.) out of the back of the mirrors then just put a light and a piece of amber in place then wire them to my blinkers. ive got a DX so there is no motor to the mirrors which might give me more room to work with.
-T.C.
Originally posted by HostileJava
are you making fun of me because I think coroncho80 is hot?
sum good ideas there, i think it will work.
88 Accord DX>> use clear plexi glass instead of amber then use an orange bulb, will look much better!
But its gotta be sealed real good, or when u go through the car wash u will find out!!!
Ride wit us or collide wit us
:badass:
MY OTHER RIDE IS YO BITCH
WHO WANTS EM? 20 bucks pair
Travis
www.cardomain.com/id/dxhatchback
what about something like on the new ford windstar minivans, where there are led's beind the mirror? and they blink like an arrow?
-Scott
3geez member since Sept. 27, 2001
"its a shame that our society as glorified the thug life. It just churns out fearless idiots with guns " - Pimp86LX
i just posted that! damn!
Travis
www.cardomain.com/id/dxhatchback
the one with the arrows SUCC!!!!!
I need that shit that be on benzes and shit like that.
"I'm the macc on the blocc/ girls be jaccin the cocc/ bobbin up and down like they was a jacc in the box/ on the real when I was young I used to jacc it alot/ but now I'm old, so I only use it to fucc/ war wit me, yo you gone be losing your lucc/ cuz you against me, is only gone be proving you succ/..."
i was messing around in the junkyard and a side mirror from the 4g and our 3g side mirrors were close. i noticed the screw hols for the 4g to fit would have to be drilled, but plenty of rom for a strong hold. the main big hole for the passing of motor wires lines up also. i plan on using a 4g me like side mirror and drilling new holes for mounting. check it out next time youre at the junkyard.
chase your dreams, not your competition
i know for a fact that there is companies, and u can get them for any car, u just need to put them on.. dont know where to look though............hmm maybe try hondatuner magOriginally posted by Jims 86LXI HB
I think their might be a aftermarket company that makes a kit to adapt them to all kinds of cars. Don't remember where I saw it.
ur dumbOriginally posted by DXHATCHBACK
i just posted that! damn!
Travis
he means on the exterior of the mirror, on the molding, u know!!!!! like most new cars!
anything can be altered i think the 90-93 accord m-3's will fit with slight modifications. but in the original post you said signal mirrors like the brand Signal. i know www.importfan.com has the carbon fiber small wire mirrors that look really j-spec and has been seen on many skylines. but if you are just looking for m3 i advise ebay .. i bought mine for my 92 accord for like 60.00 and they were power w/ the l.e.d. light
daniel darezzo
dude...anything can be done with a dremel!Originally posted by JaVaSa84
the one with the arrows SUCC!!!!!
I need that shit that be on benzes and shit like that.see if you can snag some of those mirrors from ebay, or even a j/y somewhere. cut you a spot in the mirror... then wire the blinkers like you would the sidemarkers . just wire them for the blinkers, and not actually the steady lights (but that would be cool!). hope that helps.
Last edited by Nospeed; 01-09-2003 at 12:22 PM.
- Justin
no speed....those were my exact plans
-Travis-
HA! I found some!! they are at autozone....well, I work there, and I found a set in the box..... we haven't put them out on the floor yet... anyway, they are stick-on LED's and you run the wires between the mirrors (glass part) and the mirror housing... and they form to any shape because behind the glue pad is aluminum that easily bends.... I'm gonna get a pair.....anyway, just thought I would let everyone know about them...
Posting Permissions
Reply With Quote
Bookmarks