Decided to do the hood strut mod since it's convenient an looks great. Pretty simple task takes about 1/2 hr
AFTER FUTURE NOTICE THIS MOD WORKS ONLY IF HOOD HINGE IS RISED!!!!!!!!!!
Things you will need:
Hood struts from a Acura legend 91-95 (reason why choose these they have a tab an holes already provided)
10mm or 3/8 ball size M6x1.0 ball stud. Ones provided in kit are to big (m10)
That's it . Let's get started!!!!!!!
You want to open your hood. Do one side at a time. Mark your hinges just in case it moves. Once that is done remove the upper bolt an install hood strut an tighen down like shown
It's opinional to rivet the hole at hood hinge.
Once that is done we can move down to the fender. You want to remove the 10mm bolt in the center of the fender an install the m6x1.0 ball stud like shown
Once that is done you can pop hood strut end to ball stud. An your done . You can move to the other side an repeat . Have someone or something support the hood when you install other strut. One strut won't hold.
When all done you should have something that looks like this.
That's all she wrote . Your conversion on is complete. Have a beer
Here's a video for more depth view.