Page 1 of 2 12 LastLast
Results 1 to 25 of 33

Thread: ** All the pictures of my new/old headers and flexpipes ***

  1. #1
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190

    Wink ** All the pictures of my new/old headers and flexpipes ***

    Ok guys, Let's start from the begining.

    A week ago a bought a set of DC Sport headers from my buddy Steve (88lxi68).






    On tuesday 12/31/02 I took the car to Steve's shop ( my mechanic) to put the headers on.




    He then started to work on it .............



    This is what the engine bay looked with the old headers on.

    Last edited by Coroncho80; 01-02-2003 at 01:16 PM.
    Maurice



  2. #2
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    After heating every single bolt to take the old headers and flex-pipe off, this was the result:




    Look at that flex pipe......... I knew it was bad but not like that







    Maurice

  3. #3
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    We had to replace every single bolt and it looked pretty good

    The whole piping is custome made execpt the Cathalic converter ( I'll get that later)










    *Hey Steve, after heating it for like 3 min, it finally came off! **


    Maurice

  4. #4

    Mike's89AccordLX's Avatar
    Join Date
    Aug 2002
    Vehicle
    1989/Honda/Accord LX/5-spd, 1994 Prelude Si/5-spd, 2004 Honda 1300 VTX
    Location
    Mankato, Minnesota
    Posts
    9,851
    Wow that header looks nice. I'm putting on my pacesetter header after I spray some alluminum spray paint on them and clena them up. Why didn't you put on a straight pipe dude? That cat looks ugly. Got any pics where it shows the headers looking down at them next to the valvecover?

  5. #5
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    and after all that exictment, I took it for a test drive and guys ................... let me tell you all that I almost broke my neck when I stepped on it! cough:: cough:: torque, torque ::cough ::cough :lol J/K

    Then, took it to the car wash so it could look nice for the new year!









    *** I wanna thanks Mark (markmdz89hatch), Steve (88lxi68), Juan (oldschoolswap) and Jay (neuspeed87lx). Throught out the time that I've been a member here; I've bought a couple of parts for my car from this guys :: and girls ::

    I got the Headers from Steve, the fuel regulator and the front bumper lip from Juan, my 17" rims from Jay and ................ I know I'm forgetting somebody here .................... what that fuck is his name .................. Oh yeah! Mark! I've never bought anything from you but you gave me a pair of rear shocks for my car and I thank you for that.

    This guys are pretty cool guys and very serious when it comes down to business.


    Oh! here is the NOS fuel pressure regulator that I bought from Juan.




    I love it too! my car feels so much stronger and faster than a couple of months ago and it also looks much better. I'm happy with my Sei!
    Maurice

  6. #6
    2.0Si User ‹^› ‹(•¿•)› ‹^›'s Avatar
    Join Date
    May 2002
    Vehicle
    1988 / Honda / Accord / LX-R
    Location
    nYc
    Posts
    3,475
    Good Shit dude! !
    -=PROJECT-=-

    NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.

    B-Series Wants You

  7. #7
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    I'm not gonna post any pics of the lip right now because I have different plans for it. It's just my little secret! hahahaha but if you're wondering what it looks like right now, just look at oldschool's car. That's the one
    Maurice

  8. #8
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by Mike's89AccordLX
    Why didn't you put on a straight pipe dude? That cat looks ugly. Got any pics where it shows the headers looking down at them next to the valvecover?

    Yeah, that cat looks like shit but little by little bro.


    I thought I took the final picture of the header now that they are on, but I can't find it on my digi cam. ????? I guess i have to take it again..............
    Maurice

  9. #9
    3Geez Veteran Mike89Accordcom's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LXI - sold, 1996 TL - sold, now I have a 2003 Acura CL Type S
    Location
    WA State
    Posts
    7,589
    That's sweet man! After I got mine in, I started it up and said holyshit. IT was sooo loud!! You can't go wrong with DC Headers

    Started with a 89 Accord LXI - 96 Acura TL - 2003 Acura CL Type S..

    my other site, www.brandonlee.com!

  10. #10


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    :pimp: <-- That's Maurice now; Pimpin' it in the 3G. The kid's ridin with some class. Props to you man, but seriously, be good, drive nice with wIfee in the car. I'll be able to sell you sum'tin one day... ...hmmm.... ...you want a full maroon LX-i interior from my 'ol parts hatch?
    -Mark D.


  11. #11


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    PS... nice to see you finally put those 17's away for the winter.
    -Mark D.


  12. #12
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    Looks good Maurice and I am glad you like the header. if that check engine light comes on make sure you switch the o2 sensor plugs. (green plug to white socket and white plug to green socket)
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  13. #13

    maka_RTH's Avatar
    Join Date
    Nov 2001
    Vehicle
    '95 Supra, '08 CBR 600RR, '89 LX-i Coupe (R.I.P.), '88 LX-i Sedan (R.I.P.), '87 LX-i Sedan (R.I.P.)
    Location
    Orem, Utah
    Posts
    1,782
    that looks sweet i can't wait to get headers i just hope i got the patience to wait for monies for some DC Sports headers
    Greg

    1989 LX-i 2dr 5spd (R.I.P.)

    2008 CBR 600RR -- 1995 Toyota Supra NA -- 2013 Nissan Frontier Pro-4x

  14. #14
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by 88LXi68
    Looks good Maurice and I am glad you like the header. if that check engine light comes on make sure you switch the o2 sensor plugs. (green plug to white socket and white plug to green socket)


    Yo man, my check engine light came on like you said! and the sometimes when the car is iddleing, it shakes a little and sometimes when I'm accelerating, it feels like no gas is going through the gas lines. You know what I'm talking about????? I checked the light under the driver seat and it blinks one time. That's suppose to be the O2 sensor right? does that sensor make the car do that???
    Maurice

  15. #15

    1989 DX R's Avatar
    Join Date
    Jul 2001
    Vehicle
    1989 Accord DX ... 2001 Accord LX
    Location
    Texas
    Posts
    2,958
    Ya. Swap the wires, and it should be good.

    BTW, anyone know how to make one of them purdy headers work on a DX?
    Good bye to the 1989 DX Type R. Hello 2001 LX.

    DX:

    "Four wheels, four doors, and no frills."

  16. #16

    Mike's89AccordLX's Avatar
    Join Date
    Aug 2002
    Vehicle
    1989/Honda/Accord LX/5-spd, 1994 Prelude Si/5-spd, 2004 Honda 1300 VTX
    Location
    Mankato, Minnesota
    Posts
    9,851
    I like it a lot. I'm going to paint my pacesetters like that and maybe just maybe it will be the same hp

  17. #17
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by Mike's89AccordLX
    I like it a lot. I'm going to paint my pacesetters like that and maybe just maybe it will be the same hp

    Ya, I think painting them you give you a 25hp gain.................
    Maurice

  18. #18
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by Coroncho80





    Yo, those factory headers must weight at least 2800 lbs or something! That's some heave shit!
    Maurice

  19. #19

    bobafett's Avatar
    Join Date
    May 2002
    Vehicle
    Stock 86 Accord LXi Hatch
    Location
    Longview, WA
    Posts
    6,545
    yep.. its actually like 2850lbs.. now your car weight negative 300lbs.. thats why you can accelerate so much better! :P

    yeah the headers are fun, but believe me, in a month you will feel slow again and need another mod...

  20. #20
    2.0Si User Neuspeed87lx's Avatar
    Join Date
    Jul 2001
    Vehicle
    96 Civic (Turbo lsvtec) /87 accord lx/95 civic dx
    Location
    Agawam, Mass
    Posts
    3,149
    nice man ! car is commin along nicely! glad to see the rims are away ... they have never seen snow ....
    Jay

  21. #21
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by Neuspeed87lx
    nice man ! car is commin along nicely! glad to see the rims are away ... they have never seen snow ....

    Well, the did with me! and they suck! :lol I never wanted them to see snow, but I did not know it was gonna snow that fast. Oh well, they are nice and warm now!
    Maurice

  22. #22
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Ok here are two pics of the headers on my car. Sorry for the dirty engine. I haven't clean it in like 4 months.




    Maurice

  23. #23
    2.0Si User Neuspeed87lx's Avatar
    Join Date
    Jul 2001
    Vehicle
    96 Civic (Turbo lsvtec) /87 accord lx/95 civic dx
    Location
    Agawam, Mass
    Posts
    3,149
    there bad in the snow ? really ?
    Jay

  24. #24
    3Geez Veteran Coroncho80's Avatar
    Join Date
    Aug 2002
    Location
    Philly
    Posts
    5,190
    Originally posted by Neuspeed87lx
    there bad in the snow ? really ?

    Yeah dude, they were horrible in the snow. I couldn't even get out of my garage! but in the rain, they were the best!
    Maurice

  25. #25

    Sabz5150's Avatar
    Join Date
    Apr 2002
    Vehicle
    1989 Accord SE-i coupe
    Location
    Richmond, VA
    Posts
    3,069


    That looks REAL familiar :lol
    My collection: Stay tuned! (04/02/2009)

    Quote Originally Posted by bobafett View Post
    glorious!

    imagine a beowulf cluster of tho... oh wait... its sabz. how is the beowulf cluster of myth boxen treating you?

Similar Threads

  1. LXi DC Headers on an LX
    By DJ Skillz 187 in forum Carburetor Tech
    Replies: 34
    Last Post: 03-18-2007, 11:34 PM
  2. new pictures game,post my pictures-explanation below
    By lostforawhile in forum Classic Honda Pics & Videos
    Replies: 6
    Last Post: 03-17-2007, 07:35 PM
  3. Headers 4-2-1 vs 4-1
    By Some Guy in forum 3geez Accords
    Replies: 4
    Last Post: 11-05-2006, 08:31 PM
  4. DC headers
    By KiDAccord in forum Performance
    Replies: 20
    Last Post: 06-14-2004, 08:06 PM
  5. headers
    By DLB in forum Performance
    Replies: 8
    Last Post: 02-11-2004, 01:25 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink