Page 2 of 2 FirstFirst 12
Results 26 to 40 of 40

Thread: Hazwan's Quad Bike Carbs Build Thread

  1. #26
    DX User
    Join Date
    Jul 2015
    Vehicle
    1989 Honda Accord LX sedan
    Location
    St. Petersburg, FL
    Posts
    22

    Re: Hazwan's Quad Bike Carbs Build Thread

    I'm curious. What would be an estimated expense if I chose to use this carb setup versus a weber? Is it all pretty much custom?



  2. #27
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    It all depends. The carbs can be had for cheap but if you could weld a piece of metal plate with some pipes then you get yourself an almost free piece of custom manifold. Or you could do what people usually did with the bike carbs conversion by chopping the stock intake off and attach the carbs directly to it

    Sent from my GT-I9295 using Tapatalk

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  3. #28
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    I've got a few vids from the other day

    This is what it sounds like from the outside. It's loud!!


    Last edited by Hazwan; 10-21-2016 at 06:11 AM.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  4. #29
    DX User
    Join Date
    Jul 2015
    Vehicle
    1989 Honda Accord LX sedan
    Location
    St. Petersburg, FL
    Posts
    22

    Re: Hazwan's Quad Bike Carbs Build Thread

    I'm going to contact Chedda Auto and see if he can fab me one for a reasonable price. I can do a lot, but custom fab runners and such I cannot do at the moment. Plus I'm going to be purchasing some suspension stuff from them anyways. Been concentrating on getting my ASE certs, so no time for learning fab work too. I'm going to follow your build, I'm really diggin' it man. Keep it up!

  5. #30

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Hazwan's Quad Bike Carbs Build Thread

    those seen fairly simple to fab up, using an FI intake to get the flange from

    Haz that last WOT run was the awesome sounding. I dont know what it is though that makes that dive in rpm after a shift on so many Hondas when they get down on it. You would think the lude tranny was close enough gearing it would steady be increasing rpm on a WOT run. Maybe it is because it is WOT and its too much air at that load till it catches up?
    I sounds wonderfull, Im not trying to sound over critical, just making a blanket statement about a sound that annoys me with civics and those.
    Im going to make a 2nd wild guess at it and say its extra weight in the car, like tools, 150 lbs of speakers and sh*t lol.. I know it slows my car down tremendously,worse with the slushbox tranny, I forget stuff is in the trunk and feel disappointed when the car just runs out of power when It was fine before lol
    Last edited by 2oodoor; 07-27-2015 at 04:31 PM.

  6. #31
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: Hazwan's Quad Bike Carbs Build Thread

    Only ricers hit wot everytime you get a chance.

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  7. #32
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    Quote Originally Posted by 2oodoor View Post
    those seen fairly simple to fab up, using an FI intake to get the flange from

    Haz that last WOT run was the awesome sounding. I dont know what it is though that makes that dive in rpm after a shift on so many Hondas when they get down on it. You would think the lude tranny was close enough gearing it would steady be increasing rpm on a WOT run. Maybe it is because it is WOT and its too much air at that load till it catches up?
    I sounds wonderfull, Im not trying to sound over critical, just making a blanket statement about a sound that annoys me with civics and those.
    Im going to make a 2nd wild guess at it and say its extra weight in the car, like tools, 150 lbs of speakers and sh*t lol.. I know it slows my car down tremendously,worse with the slushbox tranny, I forget stuff is in the trunk and feel disappointed when the car just runs out of power when It was fine before lol
    I have no idea at all. I thought it might have something to do with the reversion or whatever that is happening on the intake where the fuel sprays back out on WOT and maybe loads the intake up? I have no idea what I'm talking about tbh lol but a wideband and data logging would come in handy and see what's going on. Or maybe it's just how the it supposed to be with the gearing?

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  8. #33
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    Quote Originally Posted by Tdurr View Post
    Only ricers hit wot everytime you get a chance.
    Hey now at least my car runs and DRIVES

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  9. #34
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    I've replaced the cut radiator hoses as the carbs couplers with these fancy silicone ones except they only available in blue. So I repainted my vc and other stuff to match






    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  10. #35

    87roach's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 Hatch
    Location
    Summerland, B.C.
    Posts
    1,629

    Re: Hazwan's Quad Bike Carbs Build Thread

    Looking great man, a pretty nice accent too!
    Andrew.

    My hatch build thread(started in winter of 07).

  11. #36
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Hazwan's Quad Bike Carbs Build Thread

    man looks good

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  12. #37

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: Hazwan's Quad Bike Carbs Build Thread

    Digging the blue!
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  13. #38
    SEi User
    Join Date
    Jan 2004
    Posts
    1,396

    Re: Hazwan's Quad Bike Carbs Build Thread

    It's the A/C that's slowing him down! ;0)

  14. #39

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: Hazwan's Quad Bike Carbs Build Thread

    Looks breath taking, love it.
    I would be tempted to stick some 13" or original wheel tire on the front just to play with it for an afternoon

  15. #40
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Hazwan's Quad Bike Carbs Build Thread

    Quote Originally Posted by rjudgey View Post
    It's the A/C that's slowing him down! ;0)
    I'll take my comfy ass A/C over speed :p

    I actually had the A/C turned off in that vid so in reality the car is actually THAT slow LOL

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

Similar Threads

  1. Velocity stacks for bike carbs
    By turabaka in forum Performance
    Replies: 41
    Last Post: 12-16-2013, 02:33 PM
  2. Bike carbs
    By FAF89sedan in forum Newbie Introductions
    Replies: 3
    Last Post: 02-18-2011, 11:24 PM
  3. QUAD Motorcycle Carbs
    By Zufer in forum Performance
    Replies: 152
    Last Post: 11-28-2008, 05:03 PM
  4. Help tuning Keihin CVK bike carbs
    By w00tw00t111 in forum Performance
    Replies: 7
    Last Post: 06-09-2006, 11:01 PM
  5. Bike carbs?
    By POS carb in forum Carburetor Tech
    Replies: 2
    Last Post: 04-08-2003, 01:10 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink