balljoints effect camber

[Mantis88LX]

my passager side looks weird compared to the drivers side. i know the passenger balljoint is shot, that side doesnt look like it sits as low as the drivers side, also it doesnt have as much camber as the drivers side. i have 2'' drop with no camber kit.

is this infact the balljoin or could it be that something wasnt put together right when i had the springs installed? im pretty sure every thing was installed right just trin to make sure.

[iloveJDMblackrims69]

UMMMMM.........YOU CAN ASK NATE ON THIS ONE

[AZmike]

Are you talking about the upper control arm balljoint? If so, a bad one might have some effect on your camber. However, since the lower arm and strut/spring assembly actually supports the front of the car, that is where I would look for the cause of the height difference.