circle tail lights!

[3gen"C"ivic]

ok i have seen "A20A1's" accord with circle tail lights but the picture is too blurry for me to see exactly how they are setup. so, if any 1 of you guys here know how to do it feel free to drop a line or if "A20A1" catches this, just let me know. i have been trying to get a respnse but ii'll use this post to get more responses! HOLLA!

[Jims 86LXI HB]

I sent A20a1 a pm about this thread

I've alway's thought his tail light mod is the best looking mod anyone has done to a 3g.

[bobafett]

he took the lights from a truck or something the 4" red round brake lights... and he attached them to a metal support and painted his tails black i think...

i am prolly not acurate, but thats more or less what he did!

[sanjay]

isn't there a few 3rd gen accords with r32 tails in them?
the blue "jersey rice" accord used vinyl (i think) to cover his tails. To me they look shit. I wouldn't paint circles on my tails either...

[Chubs87Accord]

*cough cough cough cough* :lol

[RobT5580]

I have seen the white accord from Tantrum Racing at a show before and the lights fit very well but i dont know if they looked as good as when he had the stock ones with his wing. I thought it looked really good with it stock and the high wing that he has.

[jigga225]

3g = square car
i like to stick wit the theme.

[89accordboi]

yeah i dont like A20's tails at all but tahts just me, i ahvent seen it in person so i guess i really dont have a right to say, but yeah i agree with jigga, u should try and stick with the theme and do square stuff (like sq. fog lights not circles) it just makes it look crisper.

[Tim Yoak]

I think the circle fogs look a lot better if you ask me just leave everything the same:smokin:

[dXsquared]

you basically shave the tails then put Trailer lights in the place and then wire them up... i am also thinkin of doin this when the car gets painted

Travis

[Nospeed]

i was thinking about doing the whole circle tails also, but not really replacing the lights. i was thinking of just making some kind of template to go over my lights, then just paint the outer edges of my lights so i have circular lights! what do you think of that? will that work? or will it just look ricey??

[Tim Yoak]

Originally posted by DXHATCHBACK
you basically shave the tails then put Trailer lights in the place and then wire them up... i am also thinkin of doin this when the car gets painted

Travis

With wires hanging out? RED NECK LIGHTS, how about a string of beer can lights on the inside, and a pink flamingo on the hood??:lol :super: :lol

[Tim Yoak]

Originally posted by Nospeed
i was thinking about doing the whole circle tails also, but not really replacing the lights. i was thinking of just making some kind of template to go over my lights, then just paint the outer edges of my lights so i have circular lights! what do you think of that? will that work? or will it just look ricey??

SUPER RICE MAN!!

[dXsquared]

not with wires hanging out! i never said that! i think you need to read harder... dont just say shit for the sake of responding! you had no imput to the round taillight idea and how to do it! so take ur Greek White hatchback and drive back to your trailer park!

:flipa:

Travis

[Tim Yoak]

Originally posted by DXHATCHBACK
not with wires hanging out! i never said that! i think you need to read harder... dont just say shit for the sake of responding! you had no imput to the round taillight idea and how to do it! so take ur Greek White hatchback and drive back to your trailer park!

:flipa:

Travis

Hey calm down I'm just kidding for crying out loud. I'm actually working on thee idea too, when I get done I will post some pictures. If I can get the plastic outer part off, I was going to replace the backup light clear lens with round lamps, if it's behind the plastic everyone will think it's original. also I was going to cut a round hole in the turn signal lens and insert a clear section. then put in an amber bulb. it's too hard to replace the whole lens on the hatch because it has another lamp in the middle of it.

[Tim Yoak]

Originally posted by Tim Yoak
With wires hanging out? RED NECK LIGHTS, how about a string of beer can lights on the inside, and a pink flamingo on the hood??:lol :super: :lol

It was just a joke sorry

[Nospeed]

Originally posted by Tim Yoak
SUPER RICE MAN!!

i see all kinds of cars around with the tails that are round...and they either painted the exterior so that just a round part shows, or they put some kind of material over them to make that effect. is that really ricey if you do it right?

[A20A1]

3gen"C"ivic, sorry I took so long to get back to you.

Ok some of you were right with the way I did it up to a point. It was a low buget mod.
I bought 4 tails for about $15 - $20 each.
Measured how deep the the lights are, then measured how much room I had to mount the round lights in the stock lense.
Based on that I then traced 4 circles on the stock lense for the mounting holes (check the size of the light package as mounting hole size can vary.)
Then I used a dremel sideways cutting drill bit to remove the first 2 layers of the stock lense.
then I cut deeper to remove the black plastic housing behind the lense. (don't try and cut it all at once, and move very slowly... I've had a few bit's of the light crack off.)
Sand the entire surface of the stock lights... sand with a rougher grit where the lip of the round lights meet the stock lense.
Check for a good fit and then use epoxy to secure the round lights.
After the glue is dried you can use plastic body filler to flatten the stock lense where there are grooves and around the round lights to make it have a cleaner look.
Primer where/if needed and then paint everyting with the lenses of the round lights removed and the bulb removed and the bulb socket covered up to keep off over spray.

as for a wiring diagram... I'll have to check it out on my assembly but I think the civic will be different.

Also your ligths might not be as tall as the accords so the lip of the round lights may hang over the top or bottom edge.


...I hope i got everything
here is a pick of the assembly removed from the car.

[A20A1]

You can see in the lower right hand corner where a big chunk of the light cracked off.. I glued it back but it still shows.

[dXsquared]

wow... i didnt know you used the stock lights! i want to shave the lights and put the lights on... much cleaner imo...

Travis

Hatch lights arent that hard

[Tim Yoak]

Originally posted by DXHATCHBACK
wow... i didnt know you used the stock lights! i want to shave the lights and put the lights on... much cleaner imo...

Travis

Hatch lights arent that hard

Well I want to keep the clear plastic part over the lens

[A20A1]

It would look nicer that way but you'll have to start cutting the trunk so the back of the lights will fit. I did think of doing it that way though... and yes shaving the trunk is the way to go. Oh and I have no reverse lights, so... yeah.

corner head light conversion Clear taillights tail light lights red tails clear smoked custom euro lense black tint smoke color paint painted painting amber yellow orange

[Tim Yoak]

Originally posted by A20A1
It would look nicer that way but you'll have to start cutting the trunk so the back of the lights will fit. I did think of doing it that way though... and yes shaving the trunk is the way to go. Oh and I have no reverse lights, so... yeah.

I saw a diamond reflector on a flashlight and I was thinking a couple of those reflectors would fit inside the lens housing. You just have to make a holder for a 12v bulb. When I do the lights they will be done right. I'm very picky. Oh and a concave lens over the reflector so the light is dispersed properly.

[3gen"C"ivic]

Originally posted by A20A1
You can see in the lower right hand corner where a big chunk of the light cracked off.. I glued it back but it still shows.

thanks toeveryone who responded and big up too A20A1 for hooking me up. when you put together a wiring diagram let me know. thanks again!!! HOLLA!!!!

[solbmxaccord]

that looks awesome...i painted my ulgy orange a long time ago and it looked good but i like yours alot i think i will start on em tomorrow...peace