I will like to do this to my car...but will like to see how it looks first. Will anybody post pics of 3geez with all red tailights???
I will like to do this to my car...but will like to see how it looks first. Will anybody post pics of 3geez with all red tailights???
look at mike's car, i know he did it: www.89accord.com
Greg
1989 LX-i 2dr 5spd (R.I.P.)
2008 CBR 600RR -- 1995 Toyota Supra NA -- 2013 Nissan Frontier Pro-4x
heres my painted tails!!! ugh this is like the 3rd time i posted this up, lol ..... go to walmart and go into the model car section and youll find a testors spray model.... it is called candy apple transparent red...... its only about 2.50..... go to your house, shack, apartment, manshion(yea right)or whatever you live in and paint.... it will not really match at first... but the sun will dire it out and the color will become better as days pass... good luck if you do paint. theres pics below....
before pic...........
It's that the "redest"itwill get??? Nobody got it to match exaclty?
WELL...........ITS ALL MATCHED NOW>.....THOS PICS WERE LIKE RIGHT AFTER.....YOU MUST SUNBURN THEM AFTER SO DO IT ON A HOT SUNNY DAY
HERES A MATCHED PIC...ITS MATCHED TO ME BUT REMEMBER I ONLY PAINTED THE TOP OF THE TAILS
and when they flash...do they look red or orange?
Where do I get the paint? Wal-Mart?
RED of course....looks good .....you get the paint at wal-mart in the model car section.....its TESTORS lil spray paint can and is transparent candy apple red.....have fun and dont screw up!
Ill do it....and Ill post pics when Im done! Thanx guys!
If your concerned about the top and bottom matching, spray the entire lens. I took mine off the car and spray the orang and red part. Looks good too.
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
I got mine all red...
darker then that.. and they are exact match with the bottom..
but i dun have a place to host a pic
R.I.P Spoon Se-i 01/17/04
e-mail them to me i'll post em for ya [email protected]
Greg
1989 LX-i 2dr 5spd (R.I.P.)
2008 CBR 600RR -- 1995 Toyota Supra NA -- 2013 Nissan Frontier Pro-4x
Me and a friend had our 3rd Gen coupes out one day about 4 years ago and were like lets do something to the tails, so we bought the paint, painted them they looked so tight. Very cool cheap mod you can do.
How many coats of the 'testors' paint did you use??? I am looking at doing so!!!
Cameron
PROPS TO MIKE.....he was probably the first to do it...........and i did around 2 coats....depends on how it looks
Ok Guys...just finished painting the tailights...It took two coats of the Testors paint and two coats of Krylon Clear...damn the look tight...gonna post pics tomorrow...
damn..I don't got a pic on my pc..
but i will try scanning one and i will e-mail it to ya..
but ya..i put about 2 coats...over the ENTIRE taillight..
bottom and top half
R.I.P Spoon Se-i 01/17/04
just finished this mod today. it looks tight. i used 4 or 5 coats.
-T.C.
Originally posted by HostileJava
are you making fun of me because I think coroncho80 is hot?
Damn. That's a ghetto mod.....I'll probably do it too though.
not really. well i guess it would be to people that already have red lenses or to a person with a car that they can buy clears or aftermartket tail. but to a community of cars that manufactures dont make shit for this mod looks great. and it does not look homeade what so ever.Originally posted by Mr. Tapeworm
Damn. That's a ghetto mod.....I'll probably do it too though.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
I did 4 coats of transparent candy apple red and one coat of clear. It was easy and it looks good. And it cost less than $5.
Act surprised, show concern, deny, deny, deny!
There is a special paint that is made just for lights. Its an import paint that you could get in Oregon at a place called Alta. but you can probaly find it somewhere else. I did it on my lights and it matched perfectly. I didn't have to use a red spray paint and then clear coat it or anything. It lasts forever and won't faid like some other sprays, if you look at the lights on my car under pics (crwa) you can see how it turned out, and I only painted the amber, not the whole light.
- 01 Ford Ranger 4x4
Flip down LCD screen and DVD player, 8000k HID's, Westin light bar w/ PIAA 520's, Custom Flowmaster cat-back.
Bookmarks