I forgot to post this a while back but I picked up a new '03 Mach 1 lip for my Mustang a few months ago. I took several measurements and compared the curve to our 3rd gen Accord bumper and I think this will fit without much modification. If anything, it will be too long so you will need to cut a bit off the ends and also heat it or make a few relief cuts (on the part that meets up to the buttom of the bumper, won't be visible) to help it curve easier. It costs $47US here or you can take this price to the local Ford dealer and try to get them to match it and save on shipping. It's not a bad price for a brand new lip and it won't be covered in scratches and you don't need to buy stuff to modify it except for a few tap screws to mount it. It flares out like the CRX and it's pretty big so it should look good. It sort of becomes shorter (height wise) as it goes towards the wheel wells so I don't know how that will affect appearance on the Accord. But someone should give it a try. Here's a pic I had in my HD which I took at night (condensation all over the car....).
Bookmarks