86 Honda Accord turbo build

[obd0driver]

Are these dimensionally the same as an 83mm b series? How come you choose these over a turbo b series piston? Cost? Availability?

He's explained this in the short sweat to the point video on the yt link. But the answer is yes to all of the questions

Sent from my SM-N986U using Tapatalk

[Shane86]

He's explained this in the short sweat to the point video on the yt link. But the answer is yes to all of the questions

Sent from my SM-N986U using Tapatalk

This

[Shane86]

Short block complete to be continued.

[Shane86]

Going to start working on the head very soon. new coil on plug bracket

[obd0driver]

Going to start working on the head very soon. new coil on plug bracket

Sick... make sure you move the Coil packs up a bit or angled plate so it kicks out away from the valve covering head to give some spaces for the coilpacks. At least with the first coilpack bracket and the Mossleman turbo header there isnt very much room if any for the wires.

Sent from my SM-N986U using Tapatalk

[Shane86]

Sick... make sure you move the Coil packs up a bit or angled plate so it kicks out away from the valve covering head to give some spaces for the coilpacks. At least with the first coilpack bracket and the Mossleman turbo header there isnt very much room if any for the wires.

Sent from my SM-N986U using Tapatalk

Yes sir I've been think about Mount them at a 45° angle or even flat on top of the valve cover. Last one I made for a customer came out pretty good I raised it up a hair






But yeah I agree with you on the manifold the wires are so close

[Shane86]

Received this today it's a lot nicer than I thought it was going to be

[Shane86]

It's getting there😉 it's like my second attempt so I'm trying to get it right this time.

[obd0driver]

That valve cover is tight af bro. Green thats one I haven't seen before. I'm gonna redo mine I was just think something lame like wrinkle black

Sent from my SM-N986U using Tapatalk

[obd0driver]

Oh and a2b plate that thing already

Sent from my SM-N986U using Tapatalk

[Shane86]

Thanks bro. A lot of people like that wrinkled black lol

[Shane86]

Oh and a2b plate that thing already

Sent from my SM-N986U using Tapatalk

Yes sir I got a couple of transmission options set up lol just an LS

[Shane86]

I always wanted one of these side post Billet mounts

[ShiRen]

That's funny, I have one of those mounts coming today

[Shane86]

That's funny, I have one of those mounts coming today

Cool sounds good

[Shane86]

ARP crank pulley bolt I know this does not fit the 86-87 but 88-89 looks pretty good



And one of the metal brake lines passenger side in the rear broke so I guess I'm going to be doing some kind of break prop valve tuck brake line update

[Shane86]

It's getting there just decided to go with the standard 272

[Shane86]

Just working on little things here and there front bumper getting prepared for the new larger intercooler. 8889 front calipers and spindles for a larger front rotors




I

[Shane86]

Fix the rear brake lines eventually gonna pull the prop valve inside the cab.



Add a couple more parts for the transmission




To be continued

[conozo]

Good stuff

[Shane86]

Good stuff

Thanks bro

[Shane86]

Always wanted one of these.

[Shane86]

Swapping to the little bit bigger master cylinder should I did this a while ago

[Shane86]

More transmission parts carbon synchros

[Oldblueaccord]

Always wanted one of these.

Louvers Hell yeah!