Ok, now I really need help. I purchased a new stage 3 spec clutch and a brand new Luk flywheel for this auto to manual swap project. With the pressure plate lined up to the guide pins it appears that the clutch and fly wheel do not lineup properly. I got another cheap fly wheel brand new, and another 0E clutch both through rock auto, and regardless of the combination I seem to still get the same misalignment. How much is this me as a transmission noob, and how much is remarkably bad luck in purchasing two of each, and no combo that works?
In the pic I have the pressure plate lined up with the guide pins and bolt holes, but the three protrusions on the pressure plate friction surface don’t fall into the three voids on he flywheel. I removed the guide pins on the cheaper flywheel so they could line up and fall kn to place, but now no bolt holes line up.