Ok, i called the junkyard this afternoon and they said they have a 89 integra w/ the front bumper on it. I want to take the lip off of it and put it on my car. Does the lip just simply unscrew from the bumper or do you have to cut it off? Also, what modifications will i need to do to get it to fit?
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
i dunno...but i wanna see pics of this so i can do it if it works out well
"But no matter how much you tune it, it is still just an 86."
Kyoichi Sodou
~Initial D
MOds: bunch...if you see blue streak by catch up to me and ill show you ^_^
hmm. im using a 1st gen integra lip. mine just unscrewd off. but i would say that the 2nd gen lip would unscrew also. you do know that the 2nd gen lip is a smaller lip then the 1st gen. try to get a 1st gen instead.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
Originally posted by Chrome_thangs
Ok, i called the junkyard this afternoon and they said they have a 89 integra w/ the front bumper on it. I want to take the lip off of it and put it on my car. Does the lip just simply unscrew from the bumper or do you have to cut it off? Also, what modifications will i need to do to get it to fit?
The 89 integra is 1st gen not second.
To answer your question yes it does screw off. One thing though is that those bolts are usually rusted tight. You will probably want to cut them off. If you try forcing the rusted ones out it will brake the mounting holes of the lip.
yeah but the 89 teg bumper was different than the 86-7/8
i dont know what makes then different, but at the 1g teg site i have seen a lot of people switch to 89 bumper!they do also make a body kit for the 1g teg, and look, the rear bumper fits almost perfectly to a hatch (warning, BIG PICS) http://www.com-tech-online.com/car/
The difference between the 86-87 and 88-89 teg is the same as the accord. The bumper in the later years is a little fuller and has combination lights in the bumper.
Is that your car in the pic? The teg bumper on the Accord hatch is about 1 1/2 - 2 inches too narrow. Thats why the bumper sides point outward.
thnx people!
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
So we have to find an 86-87 teg to make it look good and fit right? (on our car?)
thats goldy accords car...Originally posted by guaynabo89
The difference between the 86-87 and 88-89 teg is the same as the accord. The bumper in the later years is a little fuller and has combination lights in the bumper.
Is that your car in the pic? The teg bumper on the Accord hatch is about 1 1/2 - 2 inches too narrow. Thats why the bumper sides point outward.
anyway i think the bumper is messed up. i think its warped to that shape, i am pretty sure it fits. but i think its gonna be like 1 too short, front to back wise... who knows.. i havent actually seen that in person yet, so i dunno. 87hybrid sent me those pics.
If you look at the lip at the top of the bumper thats supposed to meet the bodyline, You can notice that at the sides it doesn't meet up.
Its a good try though. It might fit with a little modification, but then again why not modify a spoiler than a stock bumper.
i think that "may" be because its not all the way bolted in. but i am not sure...
the 88-89 integra front lip does not fit complete, you have to add about 1/4 in in the middle to make it work.. I am thinking about the whole bumber, and just adding to it... I like the way it looks, just have to add something to the middle, on top of the bumper..
had fun at the wrecking yark today
'honda makes people happy'
what did you get me that bumper filler? lol
yes, I did... it is goin to be $20 for the peice, but you need to come and meet up with me... then we can come and do something about it... when ever is good for you
'honda makes people happy'
w00t aweome. where in portland are you? i am downtown tomorrow for school...
I just made myself a lip from a 86 integra, all i had to do was cut it in the middle and add a 2 1/2 piece of lip in the middle and it fits perfect! Sure alot less work than the crx lip
Posting Permissions
Reply With Quote
Bookmarks