I'm wanting to shave my antana(mispelled) and put a short rubber one on the back of the roof. How would i go about running the wire to it for reception? Has anyone on the board done this?
I'm wanting to shave my antana(mispelled) and put a short rubber one on the back of the roof. How would i go about running the wire to it for reception? Has anyone on the board done this?
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
i shaved my antanna but i put 2 french antannas in the fender u can move it by just buying an extender at autozone or similar store and drilling new holes 4 monting and cable access.where u want it to be
IF SPARKS DONT FLY YOUR TO HIGH!!!!
that is simple get the mounting bracket from a 4 gen and a extender cable fill in your old hole an done
IF SPARKS DONT FLY YOUR TO HIGH!!!!
Is there any way to take down the head liner and stoff so you can get at the roof from under neath to run the cable to the back of the roof
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
remove all the side trim and dome light and the little push pin over the rear seat
IF SPARKS DONT FLY YOUR TO HIGH!!!!
I have a golf bee sting antena on my accord I think it looks dope
the only hard part was getting the cable between the apiller and the dash.
racer x
YAXLEY!!!
we are having a meet in Niagara on June 21... we are hopin for around 50 cars... all accords of diferent years... if you can come... PM me... i will give you the full details..
Travis
www.cardomain.com/id/dxhatchback
im in to that but pm me when you can
racer x
Bookmarks