ok i need a lip really really bad i have blue neon tube covered with dam electrical tape i know its from a crx that i want and its the 86-87 si right.
also i need to know dose it just screw right in or do i have to bend it or heat it up
one more thing what can i use for the back
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
you'll need a little bit extra to go in the middle, the crx lip isn't quite long enough to go across the front bumper. and i think you just crew it in.
Greg
1989 LX-i 2dr 5spd (R.I.P.)
2008 CBR 600RR -- 1995 Toyota Supra NA -- 2013 Nissan Frontier Pro-4x
It needs to be extended on the front and on the sides. Its not as easy as it looks. Mine took about 4-5 hours to do to mold the seams, now it looks stock.
Nate.
You can make a rear lip from the same lips. So you'd need a total of 4 crx lips for front and back lips. Have fun finding that many. I can't even find just one.
I think you all should consider using a 88-89 1gen integra front lip. It works well without all the cutting. Also, it is way easier to find. Remember 88-89 not 86-87 because both year have a different lip.
yeah using a 1stgen integra lip works way better and are easier to find. you just need to work at shaving the side off aabout 1/4 so you can flush mount it. i got one and i am in the proces of mounting it.Originally posted by zip7
I think you all should consider using a 88-89 1gen integra front lip. It works well without all the cutting. Also, it is way easier to find. Remember 88-89 not 86-87 because both year have a different lip.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
i went down to lowes and bought a 20ft roll of this gardening stuff, about 4 inches width... cut and screwed on... looked great, but my car is so low and i deliver pizza so i have to deal with shitty driveways and snow alot it busts off sometimes, so im waiting till spring to do it again. with it on my front is like 2in off the ground... looks so badass
Mods:
90/91 CRX Si Wheels on Yokohama's, HP Racing 4'' oval exhaust, Arospeed Coilovers (0-4" drop, slammed at about 3.5" now), Modified Integra Short Ram Intake, Clear Front Bumper Lights(wired on w/ hyperwhite bulbs), Sidemarkers, White Interior Trim(Console, Vents, Handles, etc...), Removed Emblems, Type-R shift knob, Aiwa CD Deck, Sony Xplod 6x9's
17.06 @ 80.9 mph
http://www.cardomain.com/id/slammedlxi
HAHHAAH..........can you say GHETTO? Thats the stuff you use to edge your lawn from your sidewalks..you beat it in the ground. When someone walks up to your car and sees that, you know how hard you are going to get laughed at?
Man, some people just puzzle me...i have to ask..are you on crack? Oh yeah..your a pizza delivery boy....their always the short strawl in the package.
Whats next..you going to drag the water hose and put a seeder on the back too?
3rd gen lawn service?
Nate.
Nate.
Darkside had the same thing, you can hardly tell that it is the gardening edging stuff. it looks really good, and its really flexible...if someone has a pic of Darkside's car, post it...
- Justin
will the integra lip fit perfect on the coup bumper or the regular bumper, because the sides on both are different. I have a coup bumper will a have to shave or cut and paste?
I don't need speed, I just want it.
it should fit 88-89 coup/sedan, but on 86-87 it might be a little longer on the side. It also depend if you wrap it around or put it flush under the bumper. I wrapped it around and I ended up having not to cut any off. I did it on my 89sedan.
However on 86-87 I recommended using a mazda 929 front lip. Its overall length is almost a match with 86-87 year. Hope this help.
how can you tell the difference b/n a 86-87 and a 88-89 integra lip at the junkyards?
86-87 1gen teg lip are flush mounted under the bumper and the two end are cut at an angle ex: \ For 88-89 the lip is much larger and it's wrap around the bumper with a more rounded end. The 88-89 in my opinion are the better looking.
Does the lip come off the bumper or will i have to get the whole bumper at the junkyard
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
It is a whole peice by itself and it's attached to the bumper with screw from underneath.
i wann see pics of the garden "stuff" lip...cause i could actually do that and i wanna see if its worth a try..i dont give a rats ass what people think...my car is 3 diff colours right now anyways
"But no matter how much you tune it, it is still just an 86."
Kyoichi Sodou
~Initial D
MOds: bunch...if you see blue streak by catch up to me and ill show you ^_^
no, really,
the garden stuff thing is ghetto, it's just like rain gutters as a bodykit and cheap wavy mesh.....
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
ok i just did the garden stuff and its hard to do unless u want to make it a 5 inch drop witch is on the ground it looks kinduv gay on my car but it will do till spring when i will go get a real lip and real side skirts from a transport ............so what im saying is if weather permits u to go to the scrap yard then just do it it will look 50 times better and u wont have to do it twice i just needed somthing to hide my neons so their u have it
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
does anyone actually know what this garden stuff is called..theres all kinds of garden stuff...why not post a pic so we can see wether or not it looks bad...cause i want a lip..and the asswads around here will prob want $300 for a teg lip
"But no matter how much you tune it, it is still just an 86."
Kyoichi Sodou
~Initial D
MOds: bunch...if you see blue streak by catch up to me and ill show you ^_^
This is Darkside's car, the only person I've seen w/ this lip. He lives like 6 blocks away from me
This lip that he's had on the car for quite a while is starting to discolor a bit. I'm not sure if he plans on changing it or maybe just painting it.
Alex
my lip looks great, i redid it this time with nuts and bolts, more sterdy... thats not ghetto nate... if thats ghetto then what do you call putting office lighting panels on your taillights? same basic idea right?
so many people have commented me on it so ah, stfu...
Mods:
90/91 CRX Si Wheels on Yokohama's, HP Racing 4'' oval exhaust, Arospeed Coilovers (0-4" drop, slammed at about 3.5" now), Modified Integra Short Ram Intake, Clear Front Bumper Lights(wired on w/ hyperwhite bulbs), Sidemarkers, White Interior Trim(Console, Vents, Handles, etc...), Removed Emblems, Type-R shift knob, Aiwa CD Deck, Sony Xplod 6x9's
17.06 @ 80.9 mph
http://www.cardomain.com/id/slammedlxi
86accordlxi what kind of llip is that!? is that the home depot one?
87 accord dx auto,k&n air filter, ,performance exhaust 2 inch pipping , black widow alarm 20% tint New escort 8500 radar ! Armrest! console
3geez member since Nov 20, 2000
its called lawn edgeing
and his looks much better then mine he he mine is messed up i did it in the cold with a heat gun o well
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
anyone know how i get rid of newbie below my name iv been here i wile now but im still a dam newbie o well
89 lx 2dr 20% tint neons inside licence plate huge muffler tip painted interior blue shift bag seat covers and flof mats and sony MP3 deck with clairion amp and mephis subs 10''
:lol I asked the same question too! You have to increase your post count......(without whoring!)
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
Posting Permissions
Reply With Quote
Bookmarks