Brodie's all motor built A20a3 engine & trans part out! :(

[clean87sedan]

Well, yep. Its happening..
Parting ways with the A20 and going to be doing a GSR swap into the sedan. Sad to say I am upset to let it go, but its what i want to do. I have already posted on the 3geez page on facebook of what I have or atleast most of what I have on the car that is for sale. Ive made a "claim" list because currently the motor is still in the car & being driven. Not beating on it anymore because of Transmission Issues, but before i sell the transmission, I will be putting carbon synchros in it. Already have them just no time to tear into trans again.. Anyways, here's what I got. I will update everytime someone claims something or buys something to show it is not available. make offers and best one takes it but I am pretty firm on prices. Located near Seattle, WA. Will include links to show the cost new vs mine and to show more info on the parts:

My build thread with everything thats for sale - https://www.3geez.com/forum/project-c...all-motor.html

** ALL IS STILL IN CAR**

TRANSMISSION;

- Hybrid 1g integra trans. 1-4 Teg, 5 Accord. New oem bearings, oem seals, carbon synchrotech synchros. Only 800 miles on bearings & seals - $450
BK 238 Honda Accord Prelude Integra 5 SPD Transmission Rebuild Kit 1986 89 | eBay
Pro-Series Carbon Synchro Set 1-5 (89-00) - Synchrotech Transmissions Inc

- ACT HA2-HDSS stage 2 clutch kit. Disc, Pressure plate, Release bearing only 800 miles on it. No launches or hard use. - $300
Amazon.com: ACT HA2-HDSS HD Pressure Plate with Performance Street Sprung Clutch Disc: Automotive

- AASCO 8 lb Flywheel. Resurfaced & balanced. That itself costed me a little over 100 bucks. - $320
Amazon.com: Aasco 103208-11 Lightweight Flywheels: Automotive

ENGINE;

- Complete block & head minus bolt on parts (Header, Intake, etc.) Stock block rebuilt, stock head milled .020", Newish valves, valve guides, 272 cam, ARP head studs & more. Compression last checked was 155-165 over all 4 cylinders all within spec. Engine made 143 WHP, 123 WTQ. KEEPING HARNESS & SOME OTHER STUFF. $800 OBO
https://www.3geez.com/forum/project-c...all-motor.html

- Skunk2 Pro Series intake manifold fitted to the a20. Still looks near new. Comes with Skunk2 thermal gasket made to fit a20 - $260
http://store.skunk2.com/engine-tunin...ifold-624.html

- AC Autotechnic fuel rail w/ adjustable fuel pressure regulator & 100 psi. fuel pressure gauge. Has 6AN inline fitting - $140 CLAIMED
http://www.redlinemotive.com/part-nu...c/ar-fb501.asp

- Golden Eagle Adjustru adjustable cam gear. Black. Uses Stainless allen head bolts instead of the 12 points. Comes with Cam cover w/ Cut out - $125

- DC sport header. No EGR hook up. Has EGT sensor port. 2 o2 sensor hook ups. Comes with 1 newish NTK o2 sensor. Minor flattening on bottom due to being lowered but not bad at all. - $300 CLAIMED

- OBD1 Dizzy plate. Comes with Newish F22 Dizzy, Dizzy key & plate hardware. - $300 CLAIMED

- Prothane GM motor mounts. Black. Comes with Mount adapters to fit a20 mounting holes & driver side Urethane filled OEM mount - $120

This is just what I have now on the list. Pretty much everything engine & trans wise other than what I posted will be up for grabs like Axles, Starter, ETC.

[clean87sedan]

Bump


Sent from my iPhone using Tapatalk

[Tizi808]

Golden Eagle Adjustru adjustable cam gear. Black. Uses Stainless allen head bolts instead of the 12 points. Comes with Cam cover w/ Cut out - $125

Prothane GM motor mounts. Black. Comes with Mount adapters to fit a20 mounting holes & driver side Urethane filled OEM mount - $120

CLAIMED

[clean87sedan]

Bump


Sent from my iPhone using Tapatalk

[clean87sedan]

Update.. Everything is SOLD. Haven't been here in a while but just want to let you guys know. Man how I miss that setup


Sent from my iPhone using Tapatalk