I have a Kicker comp VR with a PPI 2240 amp.
The wires are connected to left channel in +/-
When i hooked up the wires in bridged mode, It wouldnt let me turn up the volume due to severe cracking in the sub. that tells me something is not wired right.
I looked up the amp online, and according to the specs it's able to be bridged and it shows it on the amp it's self.
It hits nice a clean in single channel mode but not in bridged....
Josh
Here are the pics
Last edited by goldyaccord; 02-19-2003 at 02:48 PM.
sorry guys v8's rule
i wish i could help you... but i dont know car audio... lol. have any advice for me in my sub/amp thread? hehe
What kind of box are you running it in, and what year is the sub
429whp 362wtq A20 TURBO. A20T>*
The sub is sealed.. i took picture to better explain the situation but i'm currenly having problems with cardomain.. wont let me up load any more pictures...
sorry guys v8's rule
If this pic is of when you are having problems its because you dont have it wired for bridged. Pull L+ and R- to power bridged.
"AAHHH Teamsters, If only I could be as lazy and surley as a Teamster." Quote by Homer Simpson
I had it bridged and it started clipping, so i put it back to that setup in the pic.
That pic was taken after i tried bridging it.
sorry guys v8's rule
if it is clipping turn your gain down
Alex.
It cant be that, becuase if i bridge it, it's like i must have wired it wrong... it's like this, when it's in the left or right channel i cant turn it up.. But i cant even turn it up past 20 percent in bridged mode.
I'll try afew things. and see what's up.
sorry guys v8's rule
yeah, mine was doing the same thing. turning down the gain seemed to solve the problem.
Canman. Reppin for the VI till the day I die.
Posting Permissions
Reply With Quote
Bookmarks