Need a second opinion on what I'm missing here.
Got new jets, put them in, much better response, spitting back is completely gone.
Won't idle to save it's life.
I've followed the book step by step to set lean best idle but it will not stabilize no matter what I do.
I'm at 1 1/2 turns out on the mixture screws. Turning out further makes it worse.
I'm not on the progression hole, made sure of that.
Stop screw is at 1/2 turn.
Jets are:
Main 145
Idle 45f9
Air corrector 190
Emulsion tube f16
Venturi 34mm
Any tips would be appreciated.
Bookmarks