Brake pedal switch pad

[Dr_Snooz]

There is a little plastic cap on your brake pedal that depresses the brake light switch, turning it off when you aren't pressing the brakes. At this age, they get brittle and crumble away. That keeps your brake lights on overnight, leaving you with a dead battery the following morning...

...as I learned this week.

Fortunately, the pad is available in the Dorman kit 74015.
https://www.dormanproducts.com/p-16282-74015.aspx



Unfortunately, the kit costs $8.

Anyway, it's still an option if you want it.

[firefighterwhite89]

Had it happen to me. Used electrical tape and a piece of cardboard for a temporary fix. Been temporarily fixed for longer than 4 years now. Lol. Thank you my dude.

Sent from my SM-J700P using Tapatalk

[Donnyten]

Found out about this some time ago when i got the car. Been using a nut and a bolt

[InAccordance]

Happened a few months ago to me, 'ol nut and bolt fixed it up

[Dr_Snooz]

I would have used a bolt, but I didn't have anything on hand that fit. Since I was headed to the parts store anyway, I took a look through the Dorman stuff and found this. I figured it would save me contorting myself under the dash to re-adjust the switch (again), which sounded like a pretty good deal for $8. LOL. Honda had to have good reason for drilling out that little hole on the pedal and the original pad did last 29 years, so hey.

[firefighterwhite89]

Heres my fix after i tore the tape off the other day. Gotta get to a parts store

Sent from my SM-J700P using Tapatalk

[gp02a0083]

all i did was used a plastic body clip.