Results 1 to 14 of 14

Thread: Progress CS2 coil overs 86 LXi

  1. #1
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Progress CS2 coil overs 86 LXi

    just finished up putting Progress CS2 coil overs on the accord! time to go get an alignment.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	honda 1-min.jpg 
Views:	133 
Size:	169.9 KB 
ID:	9355  



  2. #2
    LX User rushell's Avatar
    Join Date
    Oct 2012
    Posts
    178

    Re: Progress CS2 coil overs 86 LXi

    where did u get them and for what car r they for also how much did they cost

  3. #3
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by rushell View Post
    where did u get them and for what car r they for also how much did they cost
    Got them from THMotorsport.com, they are for a 92-00 civic. Some modification is required to make them fit. they were about 570$

  4. #4
    SEi User Shane86's Avatar
    Join Date
    Feb 2016
    Vehicle
    86 honda accord lxi 3 door hatchback
    Location
    Florida
    Posts
    1,016

    Re: Progress CS2 coil overs 86 LXi

    Looks good

  5. #5
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by Shane86 View Post
    Looks good
    Thanks man, I’ve since raised the rear end up about a half inch. Now I’m in search of some new wheels!

  6. #6

    B0CKS's Avatar
    Join Date
    Jul 2016
    Vehicle
    1988 DX Coupe
    Location
    Detroit MI
    Posts
    334

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by 86_Accord_Lxi View Post
    Thanks man, I’ve since raised the rear end up about a half inch. Now I’m in search of some new wheels!
    I dig the look man! Way to get creative with the coilovers, can't wait to see what ends up replacing the phone-dials!
    Bagged, Type R swapped, eternal project 1988 Honda Accord DX Coupe, 1985 Honda Spree

    Build thread! https://www.3geez.com/forum/project-...upe-build.html
    [SIGPIC]

  7. #7
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by B0CKS View Post
    I dig the look man! Way to get creative with the coilovers, can't wait to see what ends up replacing the phone-dials!
    Thank you, any suggestions on wheels?

  8. #8
    LXi User InAccordance's Avatar
    Join Date
    Jun 2010
    Vehicle
    1989 Accord LX Sedan / 2000 Accord EX v6
    Posts
    967

    Re: Progress CS2 coil overs 86 LXi

    I like these, they're in my top 3 when I get wheels soon.
    https://www.carid.com/ns-series-whee...-55328272.html
    Originally posted by ShiRen:
    Nice car or not, nobody likes losing a race to an old 4 door Honda.

  9. #9
    DX User
    Join Date
    Jun 2015
    Posts
    10

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by 86_Accord_Lxi View Post
    Got them from THMotorsport.com, they are for a 92-00 civic. Some modification is required to make them fit. they were about 570$
    What type of modifications was needed for them to fit? Currently in the market for some Coilovers myself.

    Sent from my ONEPLUS A6013 using Tapatalk

  10. #10
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by baruch1 View Post
    What type of modifications was needed for them to fit? Currently in the market for some Coilovers myself.

    Sent from my ONEPLUS A6013 using Tapatalk
    for the rears: the fork is wider than the stock one, so you have to put washers in it to tighten it up onto the lower control arm. not a big deal very easy to do.
    for the fronts: the cup on the bottom of the shock body is too large to fit into the stock fork on the front. you can take the cup off of the shock body. i took mine off and machined them down to a smaller diameter to fit inside my stock forks.

    other than that they bolted up fine with the use of my original top hats.

  11. #11
    LX User rushell's Avatar
    Join Date
    Oct 2012
    Posts
    178

    Re: Progress CS2 coil overs 86 LXi

    ok thanks a lot tax time is coming

  12. #12
    LX User Fixedit's Avatar
    Join Date
    Feb 2015
    Vehicle
    1986 LXi Sedan - 1972 F250 C/S - 1987 DX Hatch - 1977 Skylark S/R (Sold) - 2001 Hyundai Accent GS (Sold) - 1981 Suzuki GS450 (Sold)
    Location
    Oregon
    Posts
    449

    Re: Progress CS2 coil overs 86 LXi

    Getting new rims eh? You interested in selling the phone dials? Hahah, and I like Traklite Gears, they'd look great in silver on the hatch!

    https://extremewheels.com/product/tr...-5-45-5x114-3/

  13. #13
    DX User 86_Accord_Lxi's Avatar
    Join Date
    Jul 2018
    Vehicle
    1986 Honda Accord Lxi
    Location
    NC
    Posts
    26

    Re: Progress CS2 coil overs 86 LXi

    Quote Originally Posted by Fixedit View Post
    Getting new rims eh? You interested in selling the phone dials? Hahah, and I like Traklite Gears, they'd look great in silver on the hatch!

    https://extremewheels.com/product/tr...-5-45-5x114-3/
    yeah i will be interested in selling them as soon as im on a new setup. i will post them on here when i get ready to let them go.

  14. #14
    DX User
    Join Date
    Nov 2017
    Vehicle
    1986 Honda Accord LXi (hatch)
    Location
    PDX
    Posts
    20

    Re: Progress CS2 coil overs 86 LXi

    How is the ride handling with these coil-overs installed? I am considering this mod but hesitant as it seems most coil-overs for our rides offer a rougher riding suspension over stock. I am leaning more towards a set of H&R springs with a decent set of struts though

    tia!

Similar Threads

  1. full bodied coil overs vs coil over sleeves
    By newaccorddriver in forum Suspension/Wheels/Tires/Brakes
    Replies: 17
    Last Post: 06-19-2007, 11:54 AM
  2. Full Coil-overs. Why not?!?!
    By w00tw00t111 in forum Suspension/Wheels/Tires/Brakes
    Replies: 24
    Last Post: 06-29-2005, 09:21 AM
  3. Need Coil Overs !!!!
    By zerotap in forum Suspension/Wheels/Tires/Brakes
    Replies: 6
    Last Post: 02-03-2004, 05:12 PM
  4. coil overs
    By hoho1217 in forum Suspension/Wheels/Tires/Brakes
    Replies: 3
    Last Post: 01-13-2003, 12:23 AM
  5. coil overs
    By LX-i dragon in forum Suspension/Wheels/Tires/Brakes
    Replies: 3
    Last Post: 06-27-2002, 09:23 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink