Is it 1/8 npt?
Is it 1/8 npt?
Originally posted by ShiRen:
Nice car or not, nobody likes losing a race to an old 4 door Honda.
I believe it should be. Same as oil temp. sensor.
Verstuurd vanaf mijn H8314 met Tapatalk
cool, thanks. If so, found the solution to my temp sensor =P
Originally posted by ShiRen:
Nice car or not, nobody likes losing a race to an old 4 door Honda.
1/8 and BPST is really close,but im not sure what it is either.
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
It seems it is confirmed to be 1/8NPT. Took a shot in the dark and bought an inline sensor housing. Works like a charm, gauge works again!
The housing is 26mm.
All told, cost 13$ for housing and a new sensor.
Last edited by InAccordance; 10-28-2019 at 07:11 PM.
Originally posted by ShiRen:
Nice car or not, nobody likes losing a race to an old 4 door Honda.
Pretty fancy for what is basically a hillbilly rig. ;-)
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
I tried using the thermostat housing but the sensor isnt long enough to make good contact with the coolant. Really isn't anywhere else to put a sensor that's before the radiator to get a good reading.
Carb model; the sensor is in the intake since coolant flows through it but that's long gone =P
Originally posted by ShiRen:
Nice car or not, nobody likes losing a race to an old 4 door Honda.
Posting Permissions
Reply With Quote
Bookmarks