Working on an 89’ accord LXi with an A20A3 motor.
I’m trying to set the idle so I can set the timing but the idle screw on the throttle body is as far in as it will go. Not really sure why it’s doing this.
Any help is much appreciated!
Working on an 89’ accord LXi with an A20A3 motor.
I’m trying to set the idle so I can set the timing but the idle screw on the throttle body is as far in as it will go. Not really sure why it’s doing this.
Any help is much appreciated!
Check for vacuum leaks.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
Don't forget to check the o-ring on the idle adjusting screw. I had the 0-ring broken before and the air leaking inside from around the screw making the idle high.
Bookmarks