Page 1 of 2 12 LastLast
Results 1 to 25 of 32

Thread: Trailing arm bushing options

  1. #1

    bscanlan's Avatar
    Join Date
    Jul 2012
    Vehicle
    1988 Accord LXi Coupe
    Location
    Amherst, Ohio
    Posts
    170

    Trailing arm bushing options

    So I am approaching being done with replacing all bushings with urethane, and it occurs to me that I have not seen any such options for the trailing arm-to-body bushings which are so soft and sloppy. Has anyone found a compatible bushing to fit (like the one pictured, which of course is far too small)?Click image for larger version. 

Name:	7AE3F4B1-D761-439E-A11A-65BABC0140DD.jpg 
Views:	309 
Size:	425.9 KB 
ID:	10177
    1989 LXi Hatchback - Napster
    1989 LXi Sedan - sold 😒
    1988 LXi Coupe - Old Skool
    1984 Nissan 300ZX A.E. - 50AEZX
    2019 Subaru Forester Touring - snow mobile
    2023 Chevy Bolt EUV - DD



  2. #2


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    https://www.3geez.com/forum/suspensi...-bushings.html

    #23 correct? in the drawing.

    I havent heard anyone replacing it. Theres a civic style arm that alot of companies make a bushing/sperical bearing for might be an option.

    EDIT: this is the one im thinking maybe 6:35 min mark.

    Hard race video install hits about 6 min mark as well.



    nice to see you back on the forums. Let us know what you think.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  3. #3


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    https://kingpinmachine.com/

    I have my eye on this guy for a while might be one to try out.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  4. #4

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,162

    Re: Trailing arm bushing options

    I found an autoparts warehouse supplier that has these trailing arm bushings listed. I'm sure they are no name brand but anything is better than stock at this point. They had a minimum order of 4 so I ordered 8 (4 sets) I will sell you guys the remaining sets when i get them, shipping was expensive and says 24 to 42 days so, dont hold your breath. I'll let you know when i have them and when i can test to make sure they fit. I am confident they will fit as they looked correct online, are listed for the correct car, and are listed by the honda oem part number. They will be about $40 including shipping for a set.
    Last edited by conozo; 07-30-2020 at 07:34 PM.

    1988 Honda Accord LSDX-I

  5. #5


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    Thank you!

    Keep us posted!
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  6. #6

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: Trailing arm bushing options

    Has anyone tried the windshield adhesive trick yet? I'm considering it.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  7. #7

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,162

    Re: Trailing arm bushing options

    Quote Originally Posted by conozo View Post
    I found an autoparts warehouse supplier that has these trailing arm bushings listed. I'm sure they are no name brand but anything is better than stock at this point. They had a minimum order of 4 so I ordered 8 (4 sets) I will sell you guys the remaining sets when i get them, shipping was expensive and says 24 to 42 days so, dont hold your breath. I'll let you know when i have them and when i can test to make sure they fit. I am confident they will fit as they looked correct online, are listed for the correct car, and are listed by the honda oem part number. They will be about $40 including shipping for a set.
    Sorry to disappoint but they just now refunded my money to say these are not available. Mine definitely need replaced bad. I'm looking into the DIY poly bushings now. Don't know much about it but i assume i can take the old bushing out, clean out all the rubber and pour new poly stuff in there.

    On my other forum for Insights, many used the windshield adhesive trick for the engine mounts and it definately made them stiffer but they did work. I assume windshield adhesive would work pretty good on these mounts but i think you would need to take them off and make sure its straight before gunking it up.

    1988 Honda Accord LSDX-I

  8. #8

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    What is the OD of these bushings?

  9. #9


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    https://www.hardrace.com/Product_detail.asp?id=2253

    https://www.hardrace.com/Product_detail.asp?id=2242


    Would it be worth calling an asking what the dimension of these are?
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  10. #10

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    Probably. They should be able to be turned down if theyre a few thou too large like the control arm bushings.
    I just want to point out that the solid bushings are $300 YEESH.
    I was really hoping an energy suspension bushing would fit. Don't remember what size the civic/integra bushings are now, I did when I last posted. I should really just grab some, theyre $35. https://www.suspension.com/16.7106

  11. #11


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    Go big or go home?
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  12. #12

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    I sent a message to hardrace, but I also ordered the Energy Suspension 16.7106 for the Civic/Integra. I think its a bit bigger than ours so maybe it can be turned down on a lathe.

  13. #13


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    I wish I could help more but I dont have any xtras of those suspension parts to play around with.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  14. #14

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    I have a whole car to play around with, but the bad part is I have the rear end "jacked" up on its old wheels, its a little hard to get to. I will dig it out if I really need it lol.

  15. #15


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    Quote Originally Posted by ShiRen View Post
    Probably. They should be able to be turned down if theyre a few thou too large like the control arm bushings.
    I just want to point out that the solid bushings are $300 YEESH.
    I was really hoping an energy suspension bushing would fit. Don't remember what size the civic/integra bushings are now, I did when I last posted. I should really just grab some, theyre $35. https://www.suspension.com/16.7106
    2 - 3317 - Trailing Arm Bushing -OD=75.42mm(2.96in) ID=29.10mm(1.141in) ,length=51.21mm(2in)

    Thats the specs of the civic bushing off your link
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  16. #16

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    I was looking all over for that, I knew I saw it was 3" somewhere. Yeah it should be able to be turned down, it will need a steel sleeve inside it.

  17. #17


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    I saw a 3.16 or a 3.19 measurement some place and then the site was offline and I can remember where I saw it. It might have been youtube.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  18. #18

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    I got them in, I didn't bother measuring them because they are absolutely massive lol. More than enough to turn down, now I am more worried about the width. It might be A LOT to turn down.

  19. #19

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,162

    Re: Trailing arm bushing options

    ShiRen

    Any update on this. I can't wait a whole lot longer to replace all my bushings before getting tires for the winter on the car. If you think it can work, ill buy a set and have them turned. My brother in law has a lathe I could use.

    Thanks for your efforts so far.

    1988 Honda Accord LSDX-I

  20. #20


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    Im wondering if the front lower control arm bushing might be the way to go. I think that bushing is 1.100"
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  21. #21

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    I think the Civic ones will be fine, I started driving the car without aligning it, I just eyeballed the toe, never even took the trailing arms out. I did look at the width though and its actually pretty close, for having to turn it down it really should be a pretty good starting place.

  22. #22
    SEi User gp02a0083's Avatar
    Join Date
    Nov 2004
    Vehicle
    1989 Lx-i Hatchback
    Location
    Jackson, NJ
    Posts
    1,838

    Re: Trailing arm bushing options

    Quote Originally Posted by ShiRen View Post
    I was looking all over for that, I knew I saw it was 3" somewhere. Yeah it should be able to be turned down, it will need a steel sleeve inside it.
    I have a spare OEM NOS honda bushing, was gonna take measurements to call energy or make a cast from it , but you might have gotten a better start on this. if you still need the measurements i can get them, just gotta find where i put it.

    1989 Accord Lx-i hatchback (current DD project)
    1986 Olds Cutlass 442 clone (never ending project)
    3Geez resident body man
    Owner of Wreck-less auto body

  23. #23

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,277

    Re: Trailing arm bushing options

    That would definitely be helpful

  24. #24


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,280

    Re: Trailing arm bushing options

    Quote Originally Posted by gp02a0083 View Post
    I have a spare OEM NOS honda bushing, was gonna take measurements to call energy or make a cast from it , but you might have gotten a better start on this. if you still need the measurements i can get them, just gotta find where i put it.
    That would be super!
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  25. #25

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 260,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,162

    Re: Trailing arm bushing options

    Here is a drawing of the dimensions. The civic bushings posted above aren't quite wide enough. The only issue i see with that is over time the bushing will slide out to one side of the sleeve.


    1988 Honda Accord LSDX-I

Similar Threads

  1. Rear Trailing Arm Bushings?
    By Robsan in forum Suspension/Wheels/Tires/Brakes
    Replies: 1
    Last Post: 11-10-2015, 12:17 PM
  2. Trailing Arm Bushing
    By 88Sleeper in forum Suspension/Wheels/Tires/Brakes
    Replies: 18
    Last Post: 02-11-2015, 11:20 AM
  3. 85 accord rear trailing arm bushings
    By Taylor Smith in forum Wanted
    Replies: 2
    Last Post: 12-08-2012, 12:46 AM
  4. Rear trailing arm bushing diameter
    By Strugglebucket in forum Suspension/Wheels/Tires/Brakes
    Replies: 8
    Last Post: 08-04-2009, 12:47 PM
  5. Trailing arm differences
    By EricW in forum Suspension/Wheels/Tires/Brakes
    Replies: 32
    Last Post: 09-16-2007, 09:28 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink