Any one have pictures of the AC compressors mounting brackets?? Im slowly working on a AC howto thread and I dont have pictures of either Desnso or Kehnin.
Any one have pictures of the AC compressors mounting brackets?? Im slowly working on a AC howto thread and I dont have pictures of either Desnso or Kehnin.
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
I can take pictures of the keihin if I remember. I have the compressor off my parts car so its just right there if its not fossilizing beneath a mile of sludge
That would be perfect and maybe the manifold that goes with it?
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
Probably. I remember moving the compressor off the floor where it has been since the car backed into the garage, but I dont remember where. Kind of doubt it went to the scrap pile.
Heres a picture of the Denso bracket. I also have the Kehein bracket. ill get a few pictures of it this weekend.
I did the kehien to Denso swap on my 86 prelude as the kehien compressors just didnt want to last with r-134. i do have several pictures of the process that i would be happy to share if needed.
heres the Kehein compressor mounted in the car
And heres the Denso mounted in the car.
Last edited by Havoc_Wolfy; 07-23-2020 at 11:54 PM.
Oh heck, this post just reminded me... your ac system is too shiny and nice
Very cool thank you guys. Hang on to all that ill be putting something together.
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
I am wanting to build a 3D scanner in the near future. Parts like these brackets are the first things I should throw into it.
Thank you!
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
Too bad we can't get 3D scans of these kinds of parts.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
Hey Blue, l think we have a volunteer! LOL
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
If I remember correctly there are two ND compressors that can use the same bracket, one just has a longer body... and the Keihin has its own.
Back in the day they used to say the Keihin doesn't play well with r134 but I doubt that, as long as you flush it all and run PAG it should be fine. Hell I ran iit on propane at 70psi low until I found all the leaks
Eric
3geez member since October 12, 2000
"All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau
PAG might help, but in my experience r134 leaks right out... Performance would probably be awful at that
Bookmarks