Results 1 to 11 of 11

Thread: 1988 Accord Coupe Import Edition

  1. #1
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    1988 Accord Coupe Import Edition

    Been a long time since I've posted on here, but here I am with another project thread.

    This car was actually spotted on here about 13 years ago (https://www.3geez.com/forum/classic-...-coupe-nz.html) and just over a year ago I saw it pop up in an auction. Of course I wasn't going to turn down the chance to own possibly the only 3g coupe in NZ, so I won the auction, flew down to the car and drove it back home. it drove really nice, though the power steering was a bit notchy and it did lack power, but then again it's over 30 years old so I'd say I'm lucky those where the only issues I had.

    No plans of going crazy with this car, I only want to do OEM-ish stuff to the car. basically a 2.0si conversion (like how it should've come from factory) and maybe some era correct stuff. anyway onto the pics






    weird as hell getting used to driving a LHD, even after a ~1600km drive

    never seen an inside this clean before


    Last edited by A18A; 11-28-2020 at 10:40 PM.



  2. #2
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    and then literally the day after I get back from its long trip this happens


    burst heater hose, which soaked the dizzy and got the igniter? wet and made the car die.


    so off i go to the parts car to get some bits



  3. #3
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    since i've already had the car for over a year, and I can't leave things alone, plus with the help of my hoard of cars & parts over the years, i can do most tings i want to it for free. first on the list is swapping in some digital climate controls.

    first i'll need one donor car



    then some wires


    make it all work


    and make it plug n play


    and done

  4. #4
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    next up is a rear disc brake swap


    even gave them a clean




  5. #5
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    now one of the main parts of a 2.0si conversion. a B20A! I have a manual gearbox for it, but I'm leaving it auto cause it actually works good and I really don't mind it. plus I don't have any LHD manual pedals.





  6. #6
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    and of course the mandatory clean of the engine & bay


    even cleaning the spark plug leads makes a difference


    degreased and waterblasted



    in its hole


    had to take the black box off the a20 for it because of the RHD & LHD differences. the A20 also has 2 extra solenoids in there which the B20A doesn't use (vacuum advance & evap), so those wires where repurposed for the solenoids on the auto gearbox (cause the A20 didn't have any) also had to run a pair of shielded wires for the crank? position sensor since the A20 didn't have one. i used the secondary o2 sensor wire for the B20As igniter since that also uses a shielded wire, but only 1 o2 sensor

  7. #7
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    speed sensor box thing also has to be swapped for the TCU to work properly (someone in the past has removed its "you're going too fast" beeper). I should've piggy backed that onto the other one because now the seat belt control box doesn't know when the speed is over 10mph. oh well

    6500rpm redline tach swapped also, because 2.0si


    installing TCU, also made to be plug n play


    mugen shocks also installed. not sure how much of a difference these make


    a20a vs b20a exhaust

    and the b20a swap is about 95% done. runs and drives so that's the main thing


    also comparing a US spec bumper to a JDM spec bumper, while installing a little oem lip

  8. #8
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: 1988 Accord Coupe Import Edition

    some folding mirrors. matches enough till the car can be resprayed

    someone already hacked a sedan folding mirror on this side which will probably explain why its alignment was shit and I couldn't see out of it properly. oh well, they work. I need a coupe mirror base

    some fog lights

    a quick restore before the rust owns them

    installed



    and i gave it its first wash since i've had it




    the paint is really bad which is why i never bothered before. I'd like to respray it some day.

    now all the progress on this car is up to date

  9. #9


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,282

    Re: 1988 Accord Coupe Import Edition

    Super nice write up. Thank you.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  10. #10

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: 1988 Accord Coupe Import Edition

    Lotsa work done there. Very nice. You have a LHD coupe, with leather, an A20 and some red interior color I've never seen. Far out man.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  11. #11
    DX User
    Join Date
    Nov 2020
    Vehicle
    1989 Accord Lxi coupe
    Posts
    2

    Re: 1988 Accord Coupe Import Edition

    you literally have a car i'm trying to get all the import badges from nice tread by
    the way

Similar Threads

  1. Honda Accord coupe 2.0 American Import Edition
    By Desi Vasileva in forum 3geez News & Site Feedback
    Replies: 0
    Last Post: 11-21-2018, 05:46 AM
  2. My Accord Coupe Import Edition
    By tipo2009 in forum Classic Honda Pics & Videos
    Replies: 25
    Last Post: 11-19-2018, 05:50 AM
  3. CAH: 1988 Accord LXI Coupe buildthread
    By Civic Accord Honda in forum Classic Honda Pics & Videos
    Replies: 33
    Last Post: 09-01-2014, 01:58 PM
  4. Replies: 0
    Last Post: 10-16-2012, 06:25 PM
  5. 1988 accord coupe
    By wprocomp in forum For Sale
    Replies: 0
    Last Post: 03-26-2010, 09:19 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink