Results 1 to 10 of 10

Thread: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

  1. #1
    LXi User AC439's Avatar
    Join Date
    Apr 2002
    Vehicle
    86 LXi
    Location
    FL
    Posts
    632

    I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    I posted twice about suspecting the OEM PS fluid too thin for the reman rack and both posting result in "Page not found" error when click on the thread. Sorry guys !



  2. #2


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,252

    re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    No problem. I just locked them.

    What fluid would you use?
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  3. #3


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,252

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Quote Originally Posted by AC439 View Post
    I posted twice about suspecting the OEM PS fluid too thin for the reman rack and both posting result in "Page not found" error when click on the thread. Sorry guys !
    it was the back slash in your title it doesn't like. I just did the same thing.
    1988 Lxi owner since August 1995
    336k miles running strong!
    Now running E85.

    Oldblueaccord <<< MY YOUTUBE PAGE!

  4. #4
    LXi User AC439's Avatar
    Join Date
    Apr 2002
    Vehicle
    86 LXi
    Location
    FL
    Posts
    632

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Ah ! Didn't know the back slash is the problem !

    Regarding the fluid, I always use Honda OEM. But as soon as the reman is installed and refilled with OEM fluid, I noticed the steering effort is much harder (much less assist). Only I notice when the weather is cold then PS assist back to normal.

    My theory is that the seals used in the reman is probably made of a generic material (not Honda) therefore the thinner OEM fluid "slips" pass the seals and giving less assist. Viscosity increases when temp drops and less fluid slipping by and increases the hydraulic pressure differential on the seal therefore giving more assist (sorry, mouth full).

  5. #5

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,240

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Those 2 unread posts are going to bug me lol.

    Isn't the fluid type mainly for the pump? The formulation for the OEM fluid has probably changed since then, pumps need less pressure because nobody wants overassisted power steering anymore, plus your pump is also old, it probably struggles more pushing it through the new rack.

  6. #6

    conozo's Avatar
    Join Date
    Jan 2005
    Vehicle
    1988 Honda Accord DX, 250,000 Miles, Daily Driver
    Location
    Fort Wayne, Indiana
    Posts
    1,149

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    I remember someone posting about this a while ago with a reman rack being much harder to steer. They found the solution by some adjustment internally which made it normal again. Something was set to tight when they rebuilt the rack. Sorry that's very vague but i don't think your issue is the wrong type of fluid.

    1988 Honda Accord LSDX-I

  7. #7

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,240

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Unless there is an adjustment on the valvebody, the adjustment would probably be the the big hex on the bottom to set the rack lash. Idk how tight you can really get that nut before the rack basically locks though, you are supposed to turn it until it bottoms out then back it off a hair. It would not hurt to do that really. I can search the manual here in a bit to see if there is anything else.

  8. #8
    LXi User AC439's Avatar
    Join Date
    Apr 2002
    Vehicle
    86 LXi
    Location
    FL
    Posts
    632

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Quote Originally Posted by conozo View Post
    I remember someone posting about this a while ago with a reman rack being much harder to steer. They found the solution by some adjustment internally which made it normal again. Something was set to tight when they rebuilt the rack. Sorry that's very vague but i don't think your issue is the wrong type of fluid.
    That someone was probably me. I bought the 40mm wrench and back the big nut out a little at a time. It feels a little lighter everytime I backed the nut out until I start to worry the nut may be completely out. It gets to a point that is manageable but still heavy steering (compare to rack replacement).

    But with recent cold weather dip, I was expecting heavier steering but it was the opposite. When temp drops, PS assist increases. Therefore, I was thinking about viscosity issue. I also heard Honda changes the viscosity over the years and the fluid becomes lighter.

    ShiRen: I also rebuilt the pump just to rule out weak pump. No difference before and after rebuilt so I thought fluid viscosity could be the culpit.

  9. #9

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Consider the expansion & contraction of the rack components, dissimilar materials, in addition to fluid viscosity.

  10. #10
    LXi User AC439's Avatar
    Join Date
    Apr 2002
    Vehicle
    86 LXi
    Location
    FL
    Posts
    632

    Re: I broke the forum ( Honda OEM PS fluid viscosity too light thin for reman rack ?

    Quote Originally Posted by 2oodoor View Post
    Consider the expansion & contraction of the rack components, dissimilar materials, in addition to fluid viscosity.
    I did consider that. With reman, the rack metals are reused. So I can rule out different metal or dissimilar materials. I think the only thing that has changed during the reman process is the seal material. I doubt the original honda OEM seals were used that makes me think the new seals are probably made of the same material as any other aftermarket seals.

    The accidental findings of more steering assistance with lower temp makes me think the Honda OEM fluid is not too compatiable with aftermarket seal material. Same reason for not to use other PS fluids on Honda rack.

    If the seals are of different material, the expansion coefficient may very well different than OEM seal material. The very small gaps between seal and metal wall can be out of spec and some of the OEM fluid can slip pass seals until the temp gets cold and viscosity increased to maintain a larger delta-pressure to improve steerng assist. At least, this is my theory.....

Similar Threads

  1. Replies: 0
    Last Post: 01-08-2021, 10:24 AM
  2. Replies: 0
    Last Post: 01-08-2021, 10:20 AM
  3. Auto tranny slipping light low on fluid
    By -$MOKIN- in forum 3geez Accords
    Replies: 0
    Last Post: 05-15-2011, 07:48 PM
  4. Rack barfing fluid only when turned to lock
    By mward in forum 3geez Accords
    Replies: 11
    Last Post: 10-20-2010, 09:35 PM
  5. my rack and pinion Reman
    By cahil_1 in forum Classic Honda Pics & Videos
    Replies: 5
    Last Post: 02-01-2006, 03:53 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink