A20a3 swap to f23a

[G3n0c1d321]

Hey guys I need some help here, I have been working on this project for a little while I have an 89 honda accord lxi that im putting an f23a 5 speed in and I need to know what intakes fit an f23a engine it is not an a1 or a3 its just a solid f23a engine if anyone has any tips hints advice period please let me know thanks guys ill post pictures later of what we have done to it thanks

[AWH]

Any reason why not to use the stock F23A intake

Verstuurd vanaf mijn XQ-AU52 met Tapatalk

[G3n0c1d321]

Any reason why not to use the stock F23A intake

Verstuurd vanaf mijn XQ-AU52 met Tapatalk

Well I want to change intakes so I can adapt a turbo onto this engine have already got headstuds and connecting rod bolts put in car I just need to figure out a shorter intake that can handle a .48 mil turbo, I'm going to be putting 480cc injectors to give it the fuel it needs

[Oldblueaccord]

If you can make it work those JDM F20b from the Accords would be a sweet 2 liter swap I think.

[InAccordance]

Best bet would be to hit up a 6 gen website or maybe honda tech and ask there. I'm not trying to be rude or anything, please dont take it that way.
That's a 98-01 engine if I'm not mistaken yea?

[G3n0c1d321]

Best bet would be to hit up a 6 gen website or maybe honda tech and ask there. I'm not trying to be rude or anything, please dont take it that way.
That's a 98-01 engine if I'm not mistaken yea?

Yes it is a 98-01 but it is a jdm engine its just an f23a single overhead im honestly just needing to know the interchangeable engines with mine intakes pistons heads lol I know a little bit about the internals on honda but not much... just need to know the engines I can use parts from like a h22 intake or f20b intake or b16 intake what bolt patterns will match my f23a

[Oldblueaccord]

Could buy the gaskets for those other intakes and see if there close to what you have port wise. be cheapest.

[ShiRen]

You don't need an intake manifold for a turbo... a turbo kit with all the intake tubing probably won't fit in a swapped car either, so why don't you do yourself a favor and see if you can actually manage to install the engine in the car before you hang a turbo off it. But fyi a Mitsubishi 4g63t exhaust manifold basically fits on that engine. Foofy? - YouTube