https://www.3geez.com/forum/showthre...d-Install-Tips
8401 Sway bar end links
If you have the DX or LX you'll have an 18.5mm front sway bar, so you can use the 18mm EF sway bar body bushing which is part number 8-1106 and reuse the metal brackets.
If you have the LXi or SEi you'll have a 22.5mm sway bar, for this you can use the body sway bar bushing from a newer model Toyota Celica which uses a 22mm sway bar. This kit comes with new brackets and I'll edit this later with the part number.
8-1201 Front Strut Rod Bushings, this is that bar that bolts to the lower control arm and up to the front of the car under the radiator. If you have bad wheel hop, this is the most likely culprit.
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
Probably should correspond size wise. The fronts are Engery Suspension universal size.
The rear is 13 mm if he has one.
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
I am sorry. sedan type has NO stabilizer...SORRY
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
I've actually only seen about a few of the fixed beams, and they're usually in like Latvia or something. Every japanese 3g I've seen on insta has popups, but the fixed beams are definitely in the brochure
Bookmarks