Results 1 to 4 of 4

Thread: 86-87 and 88-89 LX-i parts differences

  1. #1
    DX User
    Join Date
    Apr 2024
    Vehicle
    1986 Accord LX-i hatchback
    Posts
    4

    86-87 and 88-89 LX-i parts differences

    After searching high and low for an EGR valve for my 86 LX-i, I finally resorted to purchasing one for an 88 model. It appeared to be the same valve with a different connector. Unlike the correct valve for my car, it is still in production as it also fits 4th Gen cars.

    Well guess what? I've run into the same issue with my throttle angle sensor. (I'll refer to it as TPS). I cannot find any listing for an 86 Accord TPS sensor period, but I have found several TPS sensors on eBay that claim to work on Accord/Civic/CRX/Prelude from 88-up.

    So this leads me to my question: will an 88-89 TPS work on an 86 throttle body as long as the signal, 5v ref, and ground are all hooked up the same as I did with my EGR valve position sensor?

    Are there other components that would also work from the 88-89 cars? To be clear I'm not really wanting to modify anything I don't have to. I'm simply trying to figure out the best and easiest way to keep this car functioning as it's supposed to as it and I go through the pains of getting an almost 40 year old car back on the road after a long period of sitting (10+ years).



  2. #2

    ShiRen's Avatar
    Join Date
    May 2018
    Vehicle
    87 Accord DX
    Location
    MO
    Posts
    1,238

    Re: 86-87 and 88-89 LX-i parts differences

    I don't see why the TPS wouldn't work if you just need to repin it

  3. #3
    DX User
    Join Date
    Apr 2024
    Vehicle
    1986 Accord LX-i hatchback
    Posts
    4

    Re: 86-87 and 88-89 LX-i parts differences

    I tend to think it would work, though I'll need a connector pigtail for the 88-up as the 86-87 style has a pigtail as part of the sensor and the 88-up doesn't.

  4. #4
    DX User
    Join Date
    May 2009
    Posts
    10

    Re: 86-87 and 88-89 LX-i parts differences

    He tenido problemas ac谩 en Chile para conseguir repuestos para mi Accord LXi 88, en el caso del MAP, que tiene 3 pines, en teor胊 deber胊 servir casi cualquiera, toda vez que s贸lo se necesita comunicaci贸n a la ECU, con 3 l胣eas (+5V; GND y Se帽al), lo que hay que adaptar es la ubicaci贸n de la l胣ea de vac胦, y su instalaci贸n f胹ica por la diferencia de las perforaciones para sus pernos de sujeci贸n.

Similar Threads

  1. Compression differences
    By bryan6732 in forum Performance
    Replies: 2
    Last Post: 08-29-2011, 08:59 PM
  2. Differences...
    By DigitaLuminescence in forum 3geez Accords
    Replies: 13
    Last Post: 12-29-2003, 10:35 AM
  3. What are the differences
    By damnthesenames in forum 3geez Accords
    Replies: 5
    Last Post: 12-01-2003, 06:12 PM
  4. gap differences
    By carotman in forum Suspension/Wheels/Tires/Brakes
    Replies: 14
    Last Post: 10-06-2002, 07:29 PM
  5. [General Info] SE-i and LX-i, differences between them
    By Knowledge Base Admin in forum Frequently Asked Questions
    Replies: 0
    Last Post: 04-29-2002, 01:02 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink