My passenger headlight is far too low, it illuminates about 2 feet of road very well but thats it. Are there any headlight adjustment screws anywhere?
My passenger headlight is far too low, it illuminates about 2 feet of road very well but thats it. Are there any headlight adjustment screws anywhere?
Last edited by Rookie; 11-27-2024 at 05:31 AM. Reason: Spelling error
Yeah the big knob on the motor. But it sounds like it is much lower than the range of adjustment. Check that it is not getting obstructed and the motor is sweeping the same as the other side.
I thought that was just for manual operation, but i tried to use it and the motor gets mad at me and resists any more upward movement.
Yeah it does that when it reaches the top, kind of comical. There has to be something bound up or bent
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
I guess I didn't ask whether the whole assembly is pointed down or if it is just the bulb lol, didn't cross my mind.
Yeah aiming the actual bulb is just some screws in the front. You might want to take the black plastic off and check whether it's assembled correctly since it's so low.
Last edited by ShiRen; 11-27-2024 at 09:30 PM.
Bookmarks