alright its cool. ill give you a call at 9:30am. bring your friend along tooOriginally posted by hoho1217
o sorry i didn't post this earlier, hehe
my cell is 626-643-1964.
and things have changed a bit for me, my mom is getting a lil PMS about this, but im 99.9999% im still going
and my friend said he might go, he drives another turbo car >=)
but he's a maybe, not sure yet, it'll depends wut goes on tomorow after skool.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
sounds cool, i wont be able to dyno test my ride due to low budget and ill try to get a couple of my friends to come along, the more the merrier. how long will this even be? hope to be an all day thing. pz
Well ill give you one more clue. :he he he: its a '91 turbo. if you were to buy one right now they would go for 6,000-8,000 average. come on jon i know you can get this.Originally posted by wickedaccord
the dyno is quite a ways to go.. but still easy to find. i will tell u where to go now jus in case some of u got stuck in traffic or so.. to get to the dyno., u basically get back on the 405 and continue going south. then u want to exit BRISTOL. make a RIGHT on BRISTOL. follow bristol through to about maybe 2 miles. then when u pass RED HILL, the shop will be on ur RIGHT HAND SIDE. look for A-OK MUFFLER. i cant remember wat the name was, but there is an oil change station in there also. so look for that. the A-OK MUFFLER shop is in the back. when u enter, make sure u make a right and head towards the back. if u cant find it, jus call. i will help u out from there. good luck to everyone. looking foward to see u all. by the way,,. if it's not any of those of wat i said.. then i wouldnt be able to figure it out. unless it is a datson 510 or 280.. oh well.. we'll jus have to see. late
jon
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
MR2?????Originally posted by socal3rdgen
Well ill give you one more clue. :he he he: its a '91 turbo. if you were to buy one right now they would go for 6,000-8,000 average. come on jon i know you can get this.
sorry guys v8's rule
no i think he talking bout a sentra ;x. i can be wrong though. if only my homie with a 91 turbo sentra never wrecked his car, hed join us. ill try asking another with a turbo civic for yah to race.
no i think he talking bout a sentra ;x. i can be wrong though. if only my homie with a 91 turbo sentra never wrecked his car, he'd join us. ill try asking another with a turbo civic for yah to race. well tomorrow is the meet! got to do some tuning! pz out n hope to see everyone der
(i cant seem to delete this post , some one delete my previous post, sorry if i reposted)
-dohc
oh also i wanna comment on
that 91 turbo that cost around 6 or something g's, try a 1972 rx2 at 3 - 5 g'z. those cars are fast. well my opinion ;p
Last edited by dohc; 03-21-2003 at 05:38 AM.
:pimp:
Hey count me in too! last time some shit went down... this time it better not!
Pushing it to the Limits of the Red Line!
A20A4 engine, Blew the old A20A3 =)
Trying to go Turbo But no Green can only mean that right now, i can only Dream
it cant be a sentra if it is factory turbo. an mr2 is a good choice although joel never said if it was a mid engine or front engine. anyhow, hopefully we'll have more than 10 cars. it is 40 dollars a run with 10-15 cars.. up to 20. it might even be 20 or 30 bucks. who knows. i jus hope i dont have to race everyone that is going to the meet haha! but ill have my friends pit em up first, then ill race. i jus hope my hp curve hasnt changed since i have a new distributor, map sensor and a spoon chipped ecu now. ill find out at the dyno though. late
benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
www.full-race.com
I am deffinately going...
i thought it was 40 bucks for just 2 cars.
ha ha, im not going to give you every clue. :lol man you know you would want to run everyone at the meet. You made your car to do one thing. go fast real quick without a turbo.Originally posted by wickedaccord
it cant be a sentra if it is factory turbo. an mr2 is a good choice although joel never said if it was a mid engine or front engine. anyhow,
i just hope i dont have to race everyone that is going to the meet haha!
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
i will not run, but watch a fun race ;p. i have yet to finish my 96 civic then ill run
count me in too, i'll be there for sure (562)225-6358
Danny
ok so far there r 7 ppl going including me. i need to know exactly how many ppl will be on the dyno. r u guys bringing friends also to do dyno runs?? there is 9 total with my 2 friends and the names on the list. let me know if we will be over 10 cars or atleast 10 cars dynoing. and joel, u got a point there. but ive been racing too often it's not even funny anymore. friends and i almost had to jump this guy a few weeks ago. but turned out all good. thank god i didnt get shot! but, im still trying to figure out where we r going to run. i know specific places, but we cant stay there too long. we can do light to light, but r u guys afraid of cops?? i know of another place, but we gotta wait till like, 12am to race there. cuz i know security there. only problem is, we can only race 2 gears depending on ur gear ratios. i get to 3rd. my friends legend finishes 2nd only. we'll figure it out tomorrow. joel, ill give u a call tomorrow when im at the park alright. laters
jon
benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
www.full-race.com
haha, ooops i forgot to tell u guys my name, haha, or else if u guys try to contact me, u wont know who to look for, =D sorry again
my cell is once again, 626 643 1964
my name is Kevin. (nick name hoho)
im about 38 miles away from the park, i'll leave my house at around 9:15.
and i've changed my plans a bit also, im not gonna stay for the dyno, cuz i ran outa cash, lolol, so after like when we meet at the park, when u guys hit the dyno shop, imma jet.
but i also want to know, how long are we gonna stay at the park? hopefully a while, right? cuz i wanna be able to meet u all and have some time to check out the rides and chat a lil, u know?
so ya, that's all.
looking forward to see you guys tomorow =D
kevin.
I'll have to head down to one of these sometime. Count me in if you hold one during the summer.
todays the day whoo hoo! i hope to b der first! my car will be primar gray (not black) and well ill just uh see yah der!
Last edited by dohc; 03-22-2003 at 06:31 AM.
meeting was to short. needs to be longer next timebut i had to leave and it was fun to meet the 3gee crew. props to everyone that went. and can some one post the group pic with names? pz
hehe that was pretty fun meeting u guys too, sorry i couldn't stay with u guys, i had to go. but ya that was pretty fun! =D
some one post a group pic n name the pictures!! i didnt get introduced to everyone!!
Well, I didn't make it, but there is a perfectly good reason for it besides the fact that I was stuck with my family all day. A piece of sheetrock on the freeway is NOT a good thing. Managed to screw up my car pretty good just past the El Cajon Pass heading to the I-15/215 split. A 4x4 piece of sheetrock was in the road and flew up and nailed my car. My friend was in front of me and was lucky to just run it over, but it got kicked up, got some air, and I plowed right into it. So now the future of the 3gee is up in the air. Too much wrong with it, might be time to give it up. It seems like every time I fix one thing, three other things break.
Here's a pic of mine and my friend's car...he lucked out.
http://www.o-t.us/upload/guest/IMG_1144%20(Small).jpg
Here's all the damage to my car...busted bumper light, damaged bumber, tore the fog light off, messed up the grill, and cracked the windshield.
http://www.o-t.us/upload/guest/IMG_1145%20(Small).jpg
Here's a close up of the bumper. Notice the chunks of sheetrock still stuck in the mesh.
http://www.o-t.us/upload/guest/IMG_1148%20(Small).jpg
Hope everyone had more fun than I did.
Last edited by BoredRec; 03-23-2003 at 05:00 PM.
1988 Accord LXi Sedan
Custom Cold Air Intake -- Custom Exhaust -- Neuspeed Springs -- ACT Stage II Clutch
Alpine 9815 -- MTX 2300X -- 2 JL 10W3V2's
I guess If i see a pice of sheetrock I will try to miss it dosent look frindly to a 3g
FUN IN THE SUN IN MY LXI BOLINKXR
b20a dc header, cat back ,tokico springs, mugen intake ,full msd vortec fuel pressure regulator, sei disk brakes, 16" rims reverse indiglo gages, 4wS pralude stering wheel
i messed up my bumper pretty bad too on the fwy, freakin truck tires. my front clip part broke off and i still showed up ;p
updated : i cracked my driver side skyline r32 headlights ;[. hopefully i can get another set, or if not, integra front conversion. anyone got connections to those projectors? not the type r one. i got a set, will be modded on my 96 civic hb
Posting Permissions
Reply With Quote
Bookmarks