Page 1 of 3 123 LastLast
Results 1 to 25 of 53

Thread: Parting Out

  1. 02-02-2003, 12:02 AM #1
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314

    Parting Out

    1989 Lx-i Coupe, very good condition. Mainly getting a feel for interest. I have pretty much any part (auto). The front got hammered, so theres no front bumber .

    I also have these performance parts:

    Se-I rear brakes + proportioning valve

    Brembo Slotted Rotors Front and Back (NIB)

    Metalmasters Semi-Metalic Pads Front and Back (NIB)

    2.25 inch header back exhaust (stainless steel flex pipe, high flow cat, straight though resonaor, dynomax welded round 2.5 inch w/ RA racing tip, 2.25 in pipes)

    If interested please leave what you want with a price. If you want the whole car minus those perfomance parts please leave a price. Its located about 20 miles west of philly. Thx



  2. 02-02-2003, 12:46 AM #2
    StUpiD8000
    StUpiD8000 is offline
    LXi User StUpiD8000's Avatar
    Join Date
    May 2002
    Vehicle
    89' LX-i coupe, 09 Mazda 3I
    Location
    MID-OHIO
    Posts
    595
    How much for all the rear brakes? Disk right? I wont
  3. 02-02-2003, 08:58 AM #3
    luis1578
    luis1578 is offline
    DX User luis1578's Avatar
    Join Date
    Jun 2002
    Vehicle
    white 89 lxi
    Location
    Hartford, CT
    Posts
    88
    How much for the Cat back and the rotors...Please post pics I am getting ready to do my brakes so let me know....
  4. 02-02-2003, 09:23 AM #4
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    I am interested in the SEI brakes, and the Exhaust system. I will pay whatever you want for them plus shipping

    NOah
  5. 02-02-2003, 09:34 AM #5
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    auction the se-i brakes off cuz i want them too. but will pay higher then the next guy. and i also want all of your trim. i really need this soon. im a serious buyer.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  6. 02-02-2003, 09:40 AM #6
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    I will pay you more than SOCAL I dont care what it is hahahaha

    ITS ON SOCAL hahahaha :flipa:
  7. 02-02-2003, 10:22 AM #7
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314
    OK, I see there is some nice interest.

    I'll try to get pics up in the next week, if you guys want anything else please make a post. I may auction off the performance parts. Anybody now how i can ship something like the exhaust system? It's pretty big..
  8. 02-02-2003, 10:27 AM #8
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    just put it in a big box, and Ill pay for the shipping and the cost of what you wanna sell it for. how much do you want for the exhaust and the sei brakes?
  9. 02-02-2003, 10:52 AM #9
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314
    The header back exhuast system cost me about $550, so hows $400 + shipping?

    I think I may auction off the brakes on ebay unless one of you gives me a good bid, make an offer . On the Se-i brakes, on one side the screws holding the rotor got stripped, I heard you can just drill them out and be ok. Still they are in very good shape besides that. I will proboly take pics and part her out next weekend.
  10. 02-02-2003, 10:59 AM #10
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    im going to start a bid war. i say 110+shipping. for the se-i rear brake conversion.

    noahs88accord = OwN3D
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  11. 02-02-2003, 11:00 AM #11
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    what kind of header is it? what kind of exhaust is it? well sei brakes are hard to find, so tell me what you want for them then I will make you an offer.
  12. 02-02-2003, 11:02 AM #12
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by NOAHS88accord
    what kind of header is it? what kind of exhaust is it? well sei brakes are hard to find, so tell me what you want for them then I will make you an offer.
    oh no you dont,make your offer right on this page. you see my offer. make a offer on the se-i brakes . come on dont be scared.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  13. 02-02-2003, 11:06 AM #13
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    150 +shipping
  14. 02-02-2003, 11:07 AM #14
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    150.01 + shipping :lol j/k

    real bid price = 165+ shipping
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  15. 02-02-2003, 11:08 AM #15
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    180+ shipping

    HOLLA:flipa:

    hahahaha
  16. 02-02-2003, 11:13 AM #16
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    200+shipping

    got deep pockets?
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  17. 02-02-2003, 11:14 AM #17
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    hey SOCAL,

    How long did it take you to strip down your car? what did you use? I am about to start strippin mine to repaint it

    I am willing to pay for the sei brakes just so you know

    NOah
  18. 02-02-2003, 11:15 AM #18
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    225 +shipping
  19. 02-02-2003, 11:20 AM #19
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314
    the exhaust is header BACK. I had the exhaust welded to my stock one, however if you buy my exhaust, you can just get a pacesetter one and weld mine on cause it has a stainless steel mesh flex pipe. If you want my stock Lx-i manafold with it you'll just pay for extra shipping.

    Top bids by next weekend win, and ill pull everything for you. I will try to get pics before then, anybody wanna post them for me?
  20. 02-02-2003, 11:24 AM #20
    socal3rdgen
    socal3rdgen is offline
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by 1989 Lxi Coupe
    the exhaust is header BACK. I had the exhaust welded to my stock one, however if you buy my exhaust, you can just get a pacesetter one and weld mine on cause it has a stainless steel mesh flex pipe. If you want my stock Lx-i manafold with it you'll just pay for extra shipping.

    Top bids by next weekend win, and ill pull everything for you. I will try to get pics before then, anybody wanna post them for me?
    ill post them for you.


    noah. i used paint stripper on the hood , roof and trunk. and i used a air sander to sand the rest od the car. its a pain in the ass. and im still bidding i just want to see who else is bidding also. highest bid by next weekend wins.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!

  21. 02-02-2003, 11:26 AM #21
    NOAHS88accord
    NOAHS88accord is offline
    LXi User
    Join Date
    Jun 2002
    Vehicle
    1988 HONDA ACCORD LX
    Location
    from ALASKA stationed in Korea
    Posts
    558
    yeah I am still bidding also but holding it back to see what happens, plus i want to see pics first, did you have to use alot of paint stripper? I already got the bottom of my doors done, and my trunk lid but i still need to do the fenders, top, hood, and pillars. what color you going with?
  22. 02-02-2003, 11:56 AM #22
    BLck89accord
    BLck89accord is offline
    LX User
    Join Date
    Jun 2002
    Vehicle
    Black '89 Lx-i coupe
    Location
    Spotsylvania, Virginia
    Posts
    188
    how much for the front rotors and front pads? mine are goin bad and i have a gay inspection this month so i'm searchin around. pm me and let me know or sumthin. its all in good condition right?

    R©
    "If everything seems under control, you're just not going fast enough."
    http://members.cardomain.com/ntlyku
  23. 02-02-2003, 02:37 PM #23
    StUpiD8000
    StUpiD8000 is offline
    LXi User StUpiD8000's Avatar
    Join Date
    May 2002
    Vehicle
    89' LX-i coupe, 09 Mazda 3I
    Location
    MID-OHIO
    Posts
    595
    What color is the inside of the car? If you have tan, I will buy most if not all of the inside parts.
  24. 02-02-2003, 07:30 PM #24
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314
    Hows $150 + shipping for the front rotors and pads? I paid over $200 per pair, also they are NEW in BOX. The inside of the car is Marron (that reddish color).
  25. 02-03-2003, 09:27 PM #25
    1989 Lxi Coupe
    1989 Lxi Coupe is offline
    LX User 1989 Lxi Coupe's Avatar
    Join Date
    Jun 2002
    Vehicle
    1998 240sx SE
    Location
    PA (west of philly)
    Posts
    314
    Both sets of slotted brembo rotors and the metalmasters pads have been sold.

    I've been thinking, hows $375 + shipping for the full exhaust system from the flexpipe back? I may have to cut the system in half to ship it, i dont know yet. If I do, then you can just re-weld it or have a shop do it for cheap. Let me know.
« Previous Thread | Next Thread »

Similar Threads

  1. parting 88 DX
    By rbeaud in forum Trading Post
    Replies: 19
    Last Post: 01-29-2004, 06:21 AM
  2. Parting Out 88 LXI
    By Noles in forum Trading Post
    Replies: 25
    Last Post: 08-28-2003, 04:26 AM
  3. parting out 89 lxi
    By wannaswapab20 in forum Trading Post
    Replies: 21
    Last Post: 08-27-2003, 09:47 AM
  4. parting out my 89 lxi
    By 89LXIGUY in forum Trading Post
    Replies: 16
    Last Post: 08-25-2003, 04:18 PM
  5. parting out
    By zzzhondazzz in forum Trading Post
    Replies: 0
    Last Post: 08-17-2003, 08:29 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink