I wanna get a Cold air intake in my car real soon and so I've been searching the boards and found that people have used the 90-93 integra cai , the 90-93 accord cai and the 94-97 accord cai , does anyone know which one of these fitted the best and needed the least modify/cutting??thxalso any other info would be helpful
Last edited by Gregs89AccordLxi; 04-10-2003 at 12:06 AM.
oh and if anyone knows which one does not involve moving the battery?
My 90-93nintegra did not need a moved battery but I did take the battery out when installing for convience. but It did require a lot of cutting make sure you get a 2.5 inch one becauseit will go through the factory hole in the fender the easiest.
http://www.cardomain.com/id/midias <-----------pics
hey thanx starter for responding, oh and how much of a difference in hp did ya feel from the cai over the short ram intake? hey if chrome thangs is reading this how hard was it to fit the 94-97 accord cai on your ride? was it a easy fit?thx
My low end seemed better and I felt a difference esp comming from a stop at a trafic light and where I have the filter right behind the vent I feel a difference esp at high speeds.
Short ram = WAI (warm air intake)Originally posted by Gregs89AccordLxi
how much of a difference in hp did ya feel from the cai over the short ram intake?
CAI= cold air intake
Done right where it does not draw warm air from the engine bay, all CAI's will outpower all short rams 100% of the time.
Weather of not someone is willing to get those gains with more work and addition work when it comes time to replace the CAI filter depends on how much they want the most power or not.
Read about this the test results I posted in the FAQ section
https://www.3geez.com/showthread.php?s=&threadid=8201
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
'90 Integra intake def works the best cuz of the 2.5" similarities...ur gonna have to take out the battry to make installation easier though....u can feel the difference though...I had a Weapon R intake b4 the AEM CAI and the diff felt was almost imediate...so much more air was brought in @ cooler temps b/c the filter wasnt right next to the engine sucking in warm air....just to play it asafe though...find a GOOD mechanic or custom shoppe to have them install it safely..good luck...
The Accord has been retired...
cant say that it wasnt fun cuz she was a beaut to drive around.
later everyone...
a mechanic or shop to install an intake???
man anyone can do this!!!
Hey i've been searching for the 90 93 teg cai and i noticed that some are a whole a piece and some come in 2 pieces, which one should i get? or does it even matter.. thx
any one at but it would be best top be 2.5 in.
Hey starter did yours come in 1 piece (im wondering if i get the 2 piece the cut wouldnt be in the right place) also when u were done cutting your cai how many pieces did ya end up with
it came in 1 piece and ended up in 3 I also used my 92 civic short ram for the end vecause the pipe diameter was smaller and I wanted to use my K&N cone filter but the teg one could have also been used.
Originally posted by 1988starter
it came in 1 piece and ended up in 3 I also used my 92 civic short ram for the end vecause the pipe diameter was smaller and I wanted to use my K&N cone filter but the teg one could have also been used.
i have a carbd` accord and im wondering if there's a way to install a short ram or a CAI any suggestion(s)? thanks
look in the carb tech section
It wasn't hard at all. All i had to do was lay it in there and cut off the over lapping. I got a two piece one and i had to make small cuts on each piece. Plus it's a 3" diameter.Originally posted by Gregs89AccordLxi
hey thanx starter for responding, oh and how much of a difference in hp did ya feel from the cai over the short ram intake? hey if chrome thangs is reading this how hard was it to fit the 94-97 accord cai on your ride? was it a easy fit?thx
2.25 Sprint drop w/ Bilstien struts in rear & Koni's in the front, moddified 94-97 Accord CAI, JDM power folding mirrors, Prelude A arms, Naxos exhaust, K&N Filter, Accel coil, Advanced timing, NGK-R plugs, 7.5mm wires, Apc H4 headlight conversion, PIAA hyper plasma bulbs every where, 17" Exel Maj rims wrapped in 205/40 17 Kumho tires, w/ 5% platinum tint, painted calipers & drums, shaved tail lights, moldings, antana, squirters, and emblems, Clarion DRB3675 head unit w/ Clarion 6x9s
I read the post on the CAI hp gains. What im wondering is how much more beneficiary is it to have on a carb (mechanic says not worth it) and how would a hood scoop with forced air to a carb compare?
-=MIKE=-
Updated progress on my car weekly here-> http://www.cardomain.com/member_page...page_id=383034
I feel more of a difference at night but durring the hot days I don't seem to loose peformance as my engine heats upOriginally posted by Gregs89AccordLxi
hey thanx starter for responding, oh and how much of a difference in hp did ya feel from the cai over the short ram intake? hey if chrome thangs is reading this how hard was it to fit the 94-97 accord cai on your ride? was it a easy fit?thx
No matter what diameter you get you gonna have to cut the hole down by the stock resonator box. The hole is to oval for the round pipe. I ordered both the 90-93 integra and 94-97 CAI with 2.5 diameter. The 94-97 was a easier job to fit less cutting and rearranging the pipes. It will fit better on a 5-spd too.
IMO its better to get a 2 piece if you get rain alot where you live so you can take off the second half when it rains so you dont suck water. Or get a bypass filter. Sucking water isnt a good thing.......
Nothin' 2 Old Racing
NeubJ...do you have pics of your intake? Or can you get pics? I'd like to see what it looks like. Thanks.
alex
so fellas with the 90-93 CAI u would still have to cut it?why?and also how much do u have to cut on the car if u get it at a 2.5 size piping
"smoke em"
also what model of teg does it have to be or does it even matter?what are the one's u guys have used?
"smoke em"
I used a 90-93 teg and if you get 2.5 inch piping you should not have to cut anything.
so it slips right in.and what is better 2 piece or one piece cause don't u have to throw on a by pass valve.
"smoke em"
Hey did ya get the 94 97 accord cai in a 2 piece or 1? and did u have to move the battery? plus pics would be helpfulOriginally posted by NeubJ
No matter what diameter you get you gonna have to cut the hole down by the stock resonator box. The hole is to oval for the round pipe. I ordered both the 90-93 integra and 94-97 CAI with 2.5 diameter. The 94-97 was a easier job to fit less cutting and rearranging the pipes. It will fit better on a 5-spd too.
Posting Permissions
Reply With Quote
Bookmarks