distance between front and rear wheels?
Could someone please go out and measure the distance from the center of the rear wheel to the center of the front wheel, or tell me where I can find what the factory distance is for an 89 lxi. I am still trying to diagnose a pulling problem and think that this could be the problem. I measured mine and the difference from one side to the other is about .5-.75 inches. So I am wondering what the correct distance should be.
Any help would be great.
Peace..
89 Lx-i
Performance: K&N filter,custom CAI, Accel coil, MSD 6aL ignition, magnecor wires, high flow injectors, FPR, sport exhaust,Tokico springs/struts
Appearance: white gauges, side markers, headlight conversion, clear bumper signal/fog light conversion, SE-i center armrest and cupholder, SE-i leather seats
17" ADRs with 205/40/17 khumos
future plans: 16" or 17" rims(can scratch that one off the list 9-12-02), headers-high flow cat.-cat back piping. Rear disc brakes from SE-i, reground cam.
2600 mm (102.4 inches) for coupe, sedan, and hatchback
Mike
.....or about 8'-6 1/2".
Hmmm. That is interesting. I'm measuring about 8'-5 3/4" on the left side and 8'-6" on the right on my car. Are my measurements far off enough to cause the car to pull to the left or should I not be concerned about that and look into something else?
Any more info or suggestions would be helpful.
later....
89 Lx-i
Performance: K&N filter,custom CAI, Accel coil, MSD 6aL ignition, magnecor wires, high flow injectors, FPR, sport exhaust,Tokico springs/struts
Appearance: white gauges, side markers, headlight conversion, clear bumper signal/fog light conversion, SE-i center armrest and cupholder, SE-i leather seats
17" ADRs with 205/40/17 khumos
future plans: 16" or 17" rims(can scratch that one off the list 9-12-02), headers-high flow cat.-cat back piping. Rear disc brakes from SE-i, reground cam.
Posting Permissions
Reply With Quote
Bookmarks