i have a 86 accord and i had some issues with it earlier this month and i need to fill my tranny with oil or mtf whatever one but anyways i need to find out if i am puttin the mtf in the right spot there is a bolt that seems to look like a fill bolt on the passenger side kinda close to the speedo cable is that where i should be dumpin it at?
thanks in advance
Sounds right. It's a larger round plug with a hex head. You can get to it from above. Fill with the car level until it starts to drip out. You can use 10w30 or Honda MTF.
Nothin' extra
the one i am talking about looks to be around a 17mm not sure cause i pulled it out earlier this morning i think it is it but just wanted reassurance
17 mm head with about 32 mm diameter threads is the fill plug.
Mike
thanks for the the help got it filled up no problem ..........finally the car is running like it should be
yeah this bolt is sometimes a bitch to get out !
MIKE
3geez member since October 4th 2001
on my 89 lxi, yes i've asked before, there is no dipstick for tranny fluid like people tell me. i've also been told about this fill plug, but from what i was being told i thought it was on the bottom of the car. mine would take ATF. where the hell do i put it in at??? my haynes manual only tells me about the tranny dipstick, which as i said isn't there.
-Nolan
are you auto ??
MIKE
3geez member since October 4th 2001
for a AT look down by the battery there will be a little cap twist it off the dip stick is under it(conected to it), to check the fluid don't screw the cap back in, dip it in and pull it back out there is a fill line on it. ATF is fine to use.
Posting Permissions
Reply With Quote
Bookmarks