2 1/2" piping from the cat back with this muffler on the end. It sounds sooooo sweet and the 2 1/2" piping is actually nice, haven't felt any losses anywhere yet. Couple pics
and I got my intake today that I ordered, ordered it for my gf's 92 accord, I'll get pics of that after I put it on this weekend.
hell yeah man, looks great. i hope it sounds as nice as it looks, and $40 daaaamn what a steal i paid 140 for mine.. it's a 3a racing.. i've still got the stock pipeing and everything and it's clamped but it is extremely loud at around 3500 rpms nice and deeeeep really really deep.. how does yours sound?
-4TL4NT4-
nice... yeah the 2.5" is nicer then you'd expect... just wait till you get some more mods.or do ya already got em?
- llia
ehhehe .. im gonna go with 2.5inch even thou.. ill probably be pissed about losing low end Tq.. but its just in preparationg for more mods
quick question?
um.. how come u didnt get hangers for it?
im guessing with it just like that it will shake over bumps and shit?
no???
how does it sound? Great, very deep. Let's just say that it sounds almost as good as my friend's 01 Integra GSR and that sucker is deep. From 1-4k RPMs it's at the deepest and after that you just start hearing the motor.
About my other mods, I just have an intake on it, but I'm sure I'll get some more soon.
It does have hangers, you just can't see them in the pics. They even welded one right on the top of the muffler.
And I paid about $60 for the muffler including shipping and I payed $75 for the 2.5" piping and to have it all welded on.
wow that looks disgusting
███
VW German Engineering
and so do 91 jettas trailor trashOriginally posted by n88accordLX-i
wow that looks disgusting
:lol,.................nice man i love it :super:Originally posted by kicker1_solo
and so do 91 jettas trailor trash
LOOKS GOOD MAN!!! CLEAN THE CAR UP AND GET SOME RIMS...YOURSET.....isnt that the car that had the zebrta crap and ur GF's old car?? ur makin it look prettyy nice
hey, why did you have it put on below the rear "axle" thing. Its suppose to go on top of that. It would probably scrape pretty bad if you lower it. Maby even ruin it. Id get it fixed
shaved doors, trunk, squirters, antenna/ molded 90 accord tails, 90 accord rear bumper/ custom tan and cardinal tweed interior(everything)custom speaker pods/ 16"chrome rims/ lowered 3"/ custom exhaust/efi conversion
my exhaust looks a lot like that, same piping and everything, it shouldnt scrape if u lower it a little, but just watch your midpipe, i spent hours today trying to get mine up... but since u have hangers u shouldnt have too much of a problem.
Yep, same car. I bought it for my work car and since that's the only car I drive 5-6 days a week I thought I'd start making it a little nicer. I have the money for rims I just haven't found any for a decent price that I like. But yeah, I'll have wheels within the next 3 weeks.Originally posted by iloveJDMblackrims69
LOOKS GOOD MAN!!! CLEAN THE CAR UP AND GET SOME RIMS...YOURSET.....isnt that the car that had the zebrta crap and ur GF's old car?? ur makin it look prettyy nice
And about the piping being below the axle, that's just how they did it. I didn't tell them how I wanted it or anything so I guess they just did what's easiest. It's actually better that way for performance though, not as many curves. I don't do much 4-wheelin' in it though so hopefully it'll be fine.
ur gonna wanna drop it once you get those rims, sooo low hanging exhaust is a nono... but anyway it looks great, i have the same car...
once u go black you never go back... lol
Mods:
90/91 CRX Si Wheels on Yokohama's, HP Racing 4'' oval exhaust, Arospeed Coilovers (0-4" drop, slammed at about 3.5" now), Modified Integra Short Ram Intake, Clear Front Bumper Lights(wired on w/ hyperwhite bulbs), Sidemarkers, White Interior Trim(Console, Vents, Handles, etc...), Removed Emblems, Type-R shift knob, Aiwa CD Deck, Sony Xplod 6x9's
17.06 @ 80.9 mph
http://www.cardomain.com/id/slammedlxi
yeah, I'm only gonna drop it 1.5" at the most, probably just 1". But yeah, I know what you guys mean, I used to scrape my civic ALL the time. Then I started driving over bumps and shit the right way and I'm used to it now.
Sweeet Looking
"In silence, the word is sown. So that it may flower shouting, it goes quiet"
nice exhaust, but I think you should invest your money on appearance and some turtlewax .
trying to find some wheels and then I'll lower it as soon as I can. And I guess I'm gonna try a 94-95 accord front lip on it and see how well that works out. So I've got it all planned out, just have to find the time to do it all.Originally posted by babboyyawdie
nice exhaust, but I think you should invest your money on appearance and some turtlewax .
And I washed it and waxed it about 2 hours after I took those pics
I like it, wheir did you get that muffler from??
http://cgi.ebay.com/ebaymotors/ws/eB...409994127&rd=1Originally posted by adams86lxi
I like it, wheir did you get that muffler from??
ok um.. those mufflers look totally different.. or im looking at it wrong...
the one in ur pics.. has a flat tip.. not a diagonally cut tip like the one on ebay..
so what gives?
did they just post the wrong pic or something?
i mean i like what u have and all.. but i just saw that now.. lookin at the link.. on ebay..
u can tell its diagonally cut by the silencer...and how the tip is..
well um.. just curious lol
yeah, I noticed that too after I got it. The only thing different is the slant though so it's no biggie to me.
who ever did your piping did a way better job than what is on my car. the part where it goes under the axle on my car looks like a mangled POS, but yours is the way it should be. nice.
Go fart on a Jetta.Originally posted by kicker1_solo
http://cgi.ebay.com/ebaymotors/ws/eB...409994127&rd=1
Originally Posted by k-roy
Posting Permissions
Reply With Quote
Bookmarks