A20 heads, any differences

[Euro2.0ex]

Hi

Here's my problem..

I have an a20a2 engine in my -88 accord ex (carbed), but i also have a remanufactured and flowed cylinder head originally taken from a -87 parts car.

Are there any differences in these heads, because the local parts store has different top end gasket sets for the year -87 and -88. The parts store doesnt know anything...

Which one should I buy?! Is there any difference?

Thanks!

[ACCORD EX]

well i noticed some differneces between the A20A1 engine and A20A2 engine ! i have an A20A2 in my car too ! some of the differences are the distributer cap !


MIKE

[anchovies]

heads should be the same

[Euro2.0ex]

Ok! Thanks!

[shepherd79]

Originally posted by ACCORD EX
well i noticed some differneces between the A20A1 engine and A20A2 engine ! i have an A20A2 in my car too ! some of the differences are the distributer cap !


MIKE

the only diff in distributor cap is because you probably have tech distributor vs. Hitachi distributor.

[ACCORD EX]

Originally posted by shepherd79
the only diff in distributor cap is because you probably have tech distributor vs. Hitachi distributor.

well i have a TEC that has a different distributer cap !
look below in the pic !
i was wondering if i could i use the cap you guys use ! ( because the wires i ordered online one of them was short ! ??


MIKE

[ACCORD EX]

and i have reduced emmisions too ! :>

[carotman]

The upper distributor bracket is different between the EFI and carbed engines. However, the bracket is swapable.

[Euro2.0ex]

I have exactly the same kind of engine as in the pictures above (same cap too). I only have those ugly headlights..