Here are some pics of my brand new usedB20A JDM engine!
i've already started to remove some parts as the AC compressor. Carotman already take it, so don'T ask me for. The tranny are manual F2K5. It look in perfect shape.
Here are some pics of my brand new used
i've already started to remove some parts as the AC compressor. Carotman already take it, so don'T ask me for. The tranny are manual F2K5. It look in perfect shape.
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
Wow that is the most complete B20A i have seen. I cant wait to see how much the shipping is gonna be on an a/c compressor from Japan but i will die withought a/c. Looks good should be nice when your done.
maybe Carot won'T put it, so be patient.
The compressor of the b20a was SOOOOOO heavy! Carot's face was just likeand he told me"I don't know now if i'll put it on my b20a.
The engine was complet when i've bought it. nothing was missing. exept the car
I still have everything like the fuel rail, air filter box and the compressor is now at Carotman's house. I'll remove the PGM-Fi to put 2 Weber 40 Dcom and looking for some minor modification too. Like cam gear(like yasu), Cam, piston.
I'll have to swap my car automatic to manual too.
Last edited by L3G10N; 05-11-2003 at 04:25 PM.
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
what are the differences that make it a jdm (visually) and what is the difference between b20 in american preludes and japan models
i think the direction it leans is the biggest visual cue
all i got to say is :super:
That looks really good. It is the best looking I've seen in a while, and so complete. They usually come with lines cut and stuff missing. Good luck with your project.
1988HondaAccord | JDMB20A | JDM-CTRPistons | 11:1CompressionRatio | 7400MSDChip | 280/280CrowerCams | DualWeber45DCOE | Port&PolishedHead | OBXCamGears | OBXUnderdrivePulley | CustomOilCatch | CustomColdAir | K&NFilter | HolleyFuelPressureRegulator | CraneCamsXR700 | MSD6AL | MSDBlasterSSCoil(E-Core) | MSDSuperConductorPlugWires | ACTHeavyDutyClutch | ACT6PuckCopperDisc | JDMPreludeTypeSHeader | 63mmCustomFitExhaust | TanabeHyperMedallion | GroundControlCoilOvers | KoniAdjustableShocks | PreludeVtecBrakeUpgrade | SpecialtyProductsCamberKit | 15"MugenRnRWheels(10.5lbs) | 195/55BridgestoneGridIITires | AutometerDualGaugePod | AutometerAir/FuelGauge | VDOVacuumGauge | VDOFuelPressureGauge(inline)
did you happen to notice that extra cam gear on the head?Originally posted by pimp86LX
i think the direction it leans is the biggest visual cue
:lol
Eric
3geez member since October 12, 2000
"All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau
damn you lol
.
Originally posted by POS carb
did you happen to notice that extra cam gear on the head?
:lolohyeah, that too
sheesh i didnt know the USDM lude b20s were dohc with one cam gear. thats a weird setup.Originally posted by POS carb
did you happen to notice that extra cam gear on the head?
:lol:smokin:
I didnt know eitherOriginally posted by bobafett
sheesh i didnt know the USDM lude b20s were dohc with one cam gear. thats a weird setup.
sorry guys v8's rule
yeah i really hope that was a joke posCARB
so is that the correct jdm b20a engine or is a prelude one?
Man I want to get a new engine now. Damit why didn't I decide that before I modded my A20A1 to hell and back. Well maybe I will stick with the A20A1 until.... I can't say it. But if that does happen I will just do a huge swap.
That's the correct engine for sure!!!!! :super:Originally posted by Tref_LXI
so is that the correct jdm b20a engine or is a prelude one?
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
how many miles are on that engine?
how many miles are on that engine?
The milleage is hard to say. However, there is a service sticker on the cam sprocket cover. This sticker is put when they change the timing belt.... so my guess is that his engine has at least 60k miled
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
He have over 100 000km for sure. If you check with a zoom 1000xOriginally posted by Tref_LXI
how many miles are on that engine?
This small sticker
I don't know if I shared mail with you or not. I have a complete B20A I am putting in my 86 Lude. I have been posting and mailing between Paul, Mike and Yasu. Did you get your engine overhauled and if so, where did you get the parts for the bottom end? Also, did you buy a AC Compressor, Pwr Steering and Alternator, if so, where did you get them?
Chris
I almost forgot to tell you and Paul. I stumbled across someone selling a crystal, clean overhauled B20A head on EBay. I don't need it of course, because I have the rebuild kit to overhaul my head.
Chris
yeah i'm the one you've emailed. My engine came with the AC compressor on it. If you check the fisrt pic, you can see it. The alternator was on it too. For the power steering, it came on the engine too. Look at the pics and you'll see that my engine came almost complete.
about the seals and the bearing, i've asked to carotman and he told me that the seal and bearing of the b20a5 are the same.
Last edited by L3G10N; 09-20-2003 at 04:52 PM.
In the pic of your engine I noticed that there is a spacer between the top and bottom parts of your intake. I have never seen this on any other stock engine so I was wondering what it is exactly. ( ie: Nitrous injection plate, just a spacer to increase intake runner length ) If you take your intake apart could you please take detailed pics of this piece and post it or email it to me? Thank you.
Addicted to everything Honda.
awesome!!!
http://www.myspace.com/3364524
b20accord SN on honda-tech,homemadeturbo,clubcivic,turbod16, and many more
Posting Permissions
Reply With Quote
Bookmarks