Parts for sale.

[3G Jester]

hahaha well i jsut posted about going down to NJ soooo hold that stuff for a few days....id link it but im too lazy lol. its in the lets meet section

[smufguy]

i gotcha. I will hold on to it cause seems like no one is interested in the things u want. So u got it.

[civteck]

damn i should have stripped the car myself and sold this stuff your makin a killin. hows the project comin along? send me some pics if you have any. also whens the next meet round this way? good luck with the car. also that fuel line cost me 120 to make so thats a steal what your sellin it for, everything for that matter. good luck

[smufguy]

People still dont wanna get it bro. That what sucks. EFI conversion is gonna be soo much easy cause anyone who wants to do it had the efi tank and pump from me, ur fuel line, and they got the ecu, all they need is the wire harness and they are good to go. They dont know what they are doing man.

My project is comin along. Ur car was stripped and painted too. I have taken some pictuers, when u get a scanner, send me some pictures of ur car when u got it. My email is [email protected] . I will be ordering my suspension parts within a week or so, so thats cool. My other two weeks is the time for getting it repainted. Tomorrow most of the things are gonna go in and i just gotta get the engine hoist and transfer my engine to the one i just bought. After that, suspension goes in and its all done for painting. Strobes are gonna go to the bumper lights and im getting another set to go into the reverse.

[3G Jester]

well..as you know im going to NJ!!!

sooo ill get the shit then...also...how much for the efi conversion stuff?

and ho weasy is the task? how many hours...what do you have to pull??

im going to stop being an asshole and do a search after i post this.....but...if i should decide to do it...how much for the whole set up....and is yours honestly in good shape? how many miles on it?

[smufguy]

jester, i got most of all u need. I got the efi tank, efi fuel pump, i got the filter assembly, i got the custom feed hose that Chris (civteck) spent 150 bucks to put it in. I got the ecu that you need. All u gotta get is the cabin wire harness, engine bay wire harness and the intake manifold. And your all set.

[Micah 89LXi]

any upper power steering hose?..i need the high pressure hose that comes out of the p/s pump...mine leaks now

[charlesb2003]

what's the LED 3rd brake lights look like? do they go in the place of the stock one or is it just a bulb that goes inside it?

[smufguy]

SOrry about the lateness, my email notification wont work anymore.

Anywho. Micah, yes, i do have the upper settring hose, u mean the one what comes off the pump and goes to the rear mount? Yep i got it and it does not leak. Its gonna be $20 shipped.

Charles: THe led brake light is a bar led that goes in the place of the now existing third brake light. I have finished wiring up mine and it goes below the rear window carped (the one where the speaker grills are bolted on) and its flush with it.

[moose]

hey, if the passanger side talight and the trunk lights will work on a 89 LX, then name ur price (shipped to 97008) and i'll take em. i'll also go for the ebrake handle if you still have it but if not then at least the lights since i've needed those for a LONG time

[smufguy]

the passenger side tailight is cracked when i got the car so i dont think u would want it. BUt i got the tailights that go on the trunk lid if u wanna. All i need is just 10 bucks for the whole tailight assembly on the trunk lid. By the way moose u live in CA or something?

[moose]

i could go for the trunk one for 10 bucks, do you take PP or only a cashiers check? and i live in OR

[charlesb2003]

oh ok. i think i'mma pass for now on the light but do you still have the power antenna mast? mine is stuck halfway out and the reception sux. my motor still works... how hard will it be to put the new mast in?

[smufguy]

i prefer Money order, preferbly USPS. The light is just 10 bucks cause the shipping is gonna be a lil higher thats why. Pm me if ur really interested.


putting the mast in is a 10 minute job, Jbut u need to remove the dash and everything under the driver side vent area to get to the pwr antenna motor. The antenna is 10 bucks like mentioned.

[3G Jester]

go look at the post about our meet
i still want the parts though....

[accordlxi2.0]

how much is the rear bumper ? what color is it? how much whould shipping be?

[smufguy]

shipping to where? Its huge i dont know if u want it shipped to where ever you are. If ur too far away. its gonna be like 10 bucks cause i dont want u to be paying a shit load on the part and the shipping the color is blue with red on the bottom.

[factorVIII]

are the side mirrors taken already?

[accordlxi2.0]

i'm in chicago

[smufguy]

nah, the DX passenger side mirror is not taken.

AccordLxi: i need the zip bro.

[accordlxi2.0]

60651

[smufguy]

I will be out of state as of sat 5th till the mon 14th. I will check my email and stuff but i just cant do the shipping. i still go the parts and also i got some new stuff to add on.

[smufguy]

OKay here it is. I have crapped the car and a lot of the parts are gone. BUt here is the updated parts list

Pwr Steering Pump

Distributor (carb)

Thermostat housing (Carb)

Combination switch (just the switch)

Custom Fuel feed line (good for efi swap)

Carb Fuel pump

Carb Fuel tank

Ecu (88-89)

Front fenders (88-89)

Front Bumper (88-89)

Rear Bumper (88-89)

Rear trunk tail lights (two from a 88-89)

Pass side mirror

Pwr Antenna mast (in full shape)

5spd Pedal set (5sp conversion good)

As you guys can see a lot have just junked cause people did not want it.

[Mike's89AccordLX]

Hey this might be your lucky day smufguy! Is the carbed gas tank new? And the carb fuel pump? Do you have the gas tank hoses? I just found two leaks on my car and one is near the inline fuel filter and one seems like it's coming from the gas tank. But it doesn't have a gas smell to it. I don't think its brake fluid b/c why would it be dripping off the side of the gas tank. So I think I will get it checked out today. But if you can tell me those things that would be excellent.

Oh and is the pwr antenna mast new? Does it have everything to hook up to the motor?

[smufguy]

yo mike, THe gast tank was off of my car, and its not new as u know. It has no rust in it and still has the pump attached to it. I do not have the hoses that go to the tank, but im sure i can get u some if u want from the junkyard.

THe pwr antenna mast is not new either, it was taken from my car and it has not even a small bend to it. the cable is perfect and i even have the motor with me if u want it.