need pictures of engine bay to help me fix my problem with engine swap

[jerky_lxi]

hey guys i really need you to show me pictures of your engine bay. My swap is done and the car will start only if i push the gas and clutch at the same time. Just cranks when i do clutch and brake, so i know i have messed my grounds. I have the one from the valve cover to the chasis correct, at least i think i do but from there the other 4 grounds in the front are off i think its 2 wires connected together for both of them with a ground clip that needs to be put somewhere in the engine bay. Please find them and take a picture, really please do this for me.

[jerky_lxi]

why wont anyone help me??? all you have to do is take a picture!

[Sabz5150]

Originally posted by jerky_lxi
why wont anyone help me??? all you have to do is take a picture!

If cardomain doesn't allow linking, right-click properties that bad boy.

[A20A3nD15]

Originally posted by jerky_lxi
why wont anyone help me??? all you have to do is take a picture!

heres a couple more. i just changed my valve cover gasket today and took some pics of the beginnings of my new project car i bought last weekend.

[IMG] http://www.geocities.com/primo28/val...?1054952347970 [/IMG]

[MrBen]

How hard was it to change your valve cover gasket?

[A20A3nD15]

wait lemme try to do this the right way... sorry im still a newbie

[A20A3nD15]

not as bad as i thought, just need to use the ultra black high temp rtv sealant and torque down to 7lbs...saved myself some $$ doing it myself, kinda wish i had painted the cover now

[MrBen]

*off topic*

How long did it take? Was it a bitch or anything

[A20A3nD15]

actually not a bitch at all, if i didnt spend 2 hours stripping the paint off the cover, could have been done in like an hour, i just took my time making sure everything was really clean before spreading on the silicone sealant... im curious how many hours a garage charges to do the job, could have been done in 1!