Would this be worth putting in my car? I can get the whole car for dirt cheap......I would put the motor in my car and part out the rest. But if the motor wouldn't be good for my car then I wouldn't wanna bother buying it.
Of course I'd have my cousin go with me to look at it, he's my certified mechanic
Last edited by kicker1_solo; 06-07-2003 at 10:47 PM.
Well i would have to say....FUCK YA!!!!!!!
I guess so.. You still need mounts , axles, etc.. engine has some potential , plus lots more bolt ons than an a20
-=PROJECT-=-
NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.
B-Series Wants You
If ya have the whole car to work with Go for it
THE most feared words in racing
POWERED BY HONDA
b18's are good motors. But like Matt said, it will take much more than just the motor to get it to fit into the 3G. But once you do it, it will be so worth it.
Alright. **starting to get even more serious** Where would I get these axles from? I couldn't use the ones from the car? And I know about the motor mounts, that's not a problem. Swapping the motor would be easy for me, my cousin owns a body shop. What else would I need?
Mounts, Axles, Ecu, Wiring, Shift Rod, .. OLDSCHOOLSWAP Can get you these parts..Originally posted by kicker1_solo
Alright. **starting to get even more serious** Where would I get these axles from? I couldn't use the ones from the car? And I know about the motor mounts, that's not a problem. Swapping the motor would be easy for me, my cousin owns a body shop. What else would I need?
PlaceRacing B series mount kit.............................$585.50
PlaceRacing Harness for B16A............................. $289.99
PlaceRacing Axles..each.....................................$1 49.99
PlaceRacing Shift rod B series..............................$139.99
so I'd be looking at spending $1500 just for parts to get the motor to work for me? And the harness for the B16, that would work for the B18?
B16 Is vtec B18a is non-vtec..u can make a harness using ur current a20 harness & the b18a harness..Originally posted by kicker1_solo
so I'd be looking at spending $1500 just for parts to get the motor to work for me? And the harness for the B16, that would work for the B18?
Swaps are not cheap. That's when you find out how serious you actually are.
then why did you tell me that I need this?Originally posted by ‹^› ‹(•¿•)› ‹^›
B16 Is vtec B18a is non-vtec..u can make a harness using ur current a20 harness & the b18a harness..
PlaceRacing Harness for B16A............................. $289.99
sorry i just want to know what in the fuck happened to that car???
it was in an accidentOriginally posted by Tref_LXI
sorry i just want to know what in the fuck happened to that car???
I don't know the story, but it rolled over and over and ended up on a telephone pole or something like that....
substitute the B16a and replace it with B18a.. I was just giving u an idea on the priceOriginally posted by kicker1_solo
then why did you tell me that I need this?
PlaceRacing Harness for B16A............................. $289.99
ok, but why would I need to buy one when you just said that I could combine the one that I have with the one that comes with the motor?Originally posted by ‹^› ‹(•¿•)› ‹^›
substitute the B16a and replace it with B18a.. I was just giving u an idea on the price
Is there anything else that you listed that I would not need to buy? What can I use from the two cars combined instead of buying new shit?
take what ever u can.. complete swap.. u can always sell or trade the spare parts.. But u keep the ecu , engine.. i dont remember exactly, But if the tranny is cable than u need that. Ur going to need to buy the Axles, Shift Rod & Mounts.. The wire harness is ur choice... Ur going to need ur a20 harness & B18a harness. But if u know a shop or a friend that can do the wire harness conversion, than u wont need to pay place racing to do it for you.. those are the pics of the shift rodOriginally posted by kicker1_solo
ok, but why would I need to buy one when you just said that I could combine the one that I have with the one that comes with the motor?
Is there anything else that you listed that I would not need to buy? What can I use from the two cars combined instead of buying new shit?
Well if I buy this I'm gonna get the whole car, so I'll get the motor, ecu, tranny, everything! My cousin can do the wiring of the harnesses for me, so I can save there. I guess I'm gonna go and buy me a car next weekend.
Thanx for the help man, anything else that anybody can think of?
Pay like $50 for itjust tell them that the welds on the intake manifold are blown
or say that it's only good for small parts. Make it seem like the engine is crap and that it's broken and won't work. hehehe then you can get the good deal.
go for it!
http://www.myspace.com/3364524
b20accord SN on honda-tech,homemadeturbo,clubcivic,turbod16, and many more
how fucked up are those rims? i'll give ya $10 for all 4
I woul have that block checked for cracks and tera it completely down and check the head,from the way things look the crankshaft may have walked too...ouch!
Another question.....can that motor bolt up to my stock tranny or would I have to use the B series tranny?
U can use a JDM B16a , 91 B18a & Dats it!! and you can use the a20 trannyOriginally posted by kicker1_solo
Another question.....can that motor bolt up to my stock tranny or would I have to use the B series tranny?
Last edited by ‹^› ‹(•¿•)› ‹^›; 06-12-2003 at 11:46 PM.
now I'm just confusedOriginally posted by ‹^› ‹(•¿•)› ‹^›
U can use a JDM B16a , 91 B18a & Dats it!! and you can use the a20 tranny
I meant Can't Sorry!
-=PROJECT-
NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.
B-Series Wants You
Posting Permissions
Reply With Quote
Bookmarks