Golden Eagle Adjustable Cam Gear Group Buy / Formerly Fidanza

[1988starter]

yea use the E-mail on the first page and he will give you more info I sent my money allready.

[Mike's89AccordLX]

Hey 1988starter I'm thinking about getting one of these cam gears. What will it add? I will need a timing light for sure now won't I? I guess I will have to wait until I get everything for my stereo system.

[1988starter]

It allows some cam advance without goind a whole tooth I believe open loop gained 3 real HP at the wheels dyno tuning with one.

[Mike's89AccordLX]

Will I need to get it dyno tuned? Or can I just use a timing light?

[1988starter]

I am not sure I do plan on dyno tuning but for now I just want to get in on one of the rare occasions when you can actually get one. Then I will play with it a bit using my ass dyno untill I can get on a real one. besides this seems like a nice price for a custom job.

[Mike's89AccordLX]

Do you know how many he has left or what? I will need to wait a week for another paycheck.

[1988starter]

I think he is still collecting money for the buy like you with the bars so I would suggest you e-mail him for more info what he told me was 110 for silver and 115 for blue or red. If you need a week I don't think it will be a problem.

[Mike's89AccordLX]

Sweet. Maybe I could make him a strut bar and we could swap and I could pay some extra cash.

[1988starter]

Originally posted by Mike's89AccordLX
Sweet. Maybe I could make him a strut bar and we could swap and I could pay some extra cash.

You never know.

[Eric89Carb.]

i want one but i don't know if you have any more left let me know i like one

[Eric89Carb.]

oh yea i give you my adress 1112 Hoalu PL. Wailuku, Maui,Hawaii

[Justin86]

I would love to get one but I'm still unsure on my engine. If I can't get it figured out B20 swap for me.

[Justanothermike]

OK!!!!!!
FOR ALL YOU 2ND AND3RD GEN ACCORDS AND PRELUDES!!!!!

IN RESPONSE FOR ALL OF YOUR NEEDS FOR THE LAST 4 YEARS...


" DOES ANY ONE MAKE CAMS GEARS FOR OUR CARS??"

I've made the go ahead to make the run. But the only thing is have to make 50 of them to make it worth wille!!!

Here's the details:
- 100% 6061 t6 Alunimum, half the weight of the stock piece
- The aluminum is hard anodized and temperd, stronger than cast steel.
- Lazer etched degree marks, for accurate adjustments and timing.
- CNC Machined gears for ultimate in precision timming down to the .001"
- 5 blots hold the pices togather for non-slipage accuracy.
I will be the only supplier of the cam gears.

For all that want red or blue I will need your orders now- ASAP.
Ineed to tell them how many Of what color this week.
Or else I'll just make silver ones for the rest.

- Nice to have custom parts to your specs

As of right now I'm selling them at cost (my cost) to you. so I will not be making an thing on these to help you guyes out!!!
Now If you do the math thats how much money I have to put up front ; ie: not cheep for me!!! But here is a problem I dont at this moment have the budget for all of them at this time Because of the new set limit 50 pices. I really only have the budget for 10 of them. So if I really need to Iwill cut off the purchase if I cant get the funds to gather, (Refunds will be given). This is the bes price you can get for practicaly any cam gear 110, 115 blue or red, let alone for part not even made. So if you lucky guyes make the order now you get that price. I am going to raise prices in december to recop my losses. not much tho
so order now and you definately have one. Due to production times and machineing set up it will take aproximately 6-10 weeks till compleation. If you can wait 4 years why not wait another couple of weeks!!

In order to make an order follow these few easy steps:

1) E-MAIL me with the quantity and color you want with your mailling adress.to/ at :

[email protected]

2) I'll ask youto send Me your check or money order, made out to: Open-Loop Motorsports

3) or pay via: pay pal to: [email protected]

4) I'll call in orders buy end of next week.
and I'll ship you in 6-10 weeks via: provided shipping address.

I thanks you all for your coperation/ patience and help to provide more after market support for the 2nd/3rd gen Accords and Preludes!!!

As I gain more info I'll let you guys Know !!

So if you were still wondering if any one made cam gears for the 3g Accord A20 motor.... your in the right spot. In 6-10 weeks you'll have one !!!!!!

I hope I've answered most of your questions, any other specific questions send an e-mail.
I know I'm a nice guy.

I thankyou again for your prompt coperation.
Darryl @ Open-Loop Motorsports

[1988starter]

Well I allready sent money common guys get your acts together.

[88LXi68]

I posted this info on HPOA.com

[88' Accord Ltd]

I sent mine out last friday!

[Mike's89AccordLX]

Does anyone know if these will work with the JDM B20A motors? B/c I want to buy that motor. So I just wanna know if these will work.

[88' Accord Ltd]

I don't think they will, or else everyone would have bought lightened cam gears for a B series engine and put them on their A20.

[87PreludeSi]

I thank everyone for putting the group buy on HPOA. I am the gen2 mod over there, and for reasons that I am not going to mention, group buys are no longer alloud in public ... I promise there is a good reason, basically two guys fucked it up for everyone else. Neway, I am passing the info along to all the other gen2 owners, and you should have some sort of head count out of us in a couple of days. Thank you again!

J

[NOAHS88accord]

add me on to this buy man


[email protected]

[88LXi68]

Originally posted by NOAHS88accord
add me on to this buy man


[email protected]

you have to contact him....

[1988starter]

Originally posted by Justanothermike
OK!!!!!!
FOR ALL YOU 2ND AND3RD GEN ACCORDS AND PRELUDES!!!!!

IN RESPONSE FOR ALL OF YOUR NEEDS FOR THE LAST 4 YEARS...


" DOES ANY ONE MAKE CAMS GEARS FOR OUR CARS??"

I've made the go ahead to make the run. But the only thing is have to make 50 of them to make it worth wille!!!

Here's the details:
- 100% 6061 t6 Alunimum, half the weight of the stock piece
- The aluminum is hard anodized and temperd, stronger than cast steel.
- Lazer etched degree marks, for accurate adjustments and timing.
- CNC Machined gears for ultimate in precision timming down to the .001"
- 5 blots hold the pices togather for non-slipage accuracy.
I will be the only supplier of the cam gears.

For all that want red or blue I will need your orders now- ASAP.
Ineed to tell them how many Of what color this week.
Or else I'll just make silver ones for the rest.

- Nice to have custom parts to your specs

As of right now I'm selling them at cost (my cost) to you. so I will not be making an thing on these to help you guyes out!!!
Now If you do the math thats how much money I have to put up front ; ie: not cheep for me!!! But here is a problem I dont at this moment have the budget for all of them at this time Because of the new set limit 50 pices. I really only have the budget for 10 of them. So if I really need to Iwill cut off the purchase if I cant get the funds to gather, (Refunds will be given). This is the bes price you can get for practicaly any cam gear 110, 115 blue or red, let alone for part not even made. So if you lucky guyes make the order now you get that price. I am going to raise prices in december to recop my losses. not much tho
so order now and you definately have one. Due to production times and machineing set up it will take aproximately 6-10 weeks till compleation. If you can wait 4 years why not wait another couple of weeks!!

In order to make an order follow these few easy steps:

1) E-MAIL me with the quantity and color you want with your mailling adress.to/ at :

[email protected]

2) I'll ask youto send Me your check or money order, made out to: Open-Loop Motorsports

3) or pay via: pay pal to: [email protected]

4) I'll call in orders buy end of next week.
and I'll ship you in 6-10 weeks via: provided shipping address.

I thanks you all for your coperation/ patience and help to provide more after market support for the 2nd/3rd gen Accords and Preludes!!!

As I gain more info I'll let you guys Know !!

So if you were still wondering if any one made cam gears for the 3g Accord A20 motor.... your in the right spot. In 6-10 weeks you'll have one !!!!!!

I hope I've answered most of your questions, any other specific questions send an e-mail.
I know I'm a nice guy.

I thankyou again for your prompt coperation.
Darryl @ Open-Loop Motorsports

This is what to do

[Eric89Carb.]

Ok Justanothermike i will send the money to you can let me know when you will be getting it in thks bro

[G Man89]

Hey Justanothermike have you called in the orders yet?

[G Man89]

Has anyone heard from Justanothermike?